ADJD-WM21-NKKZ0

ADJD-xMxx High Power Light Strip, Ring & Round Data Sheet Description Features Avago’s Light Strip, Ring & Round Power LEDs range of products offers a series of LEDs which provides better lifetime robustness and reliability compared to the conventional light sources. They are mounted on a metal-core PCB and thereby making it easier for thermal management. The wide radiation pattern of the Line Power LED makes it an ideal light source to illuminate a wide area. x Available in Cool White and Warm White color. Applications x Reading light x Architectural lighting x Decorative lighting x Backlighting x Task lighting x Safety / Emergency lighting x Various options with different number of LEDs on MCPCB to meet different lighting output requirement x Energy efficient x Exposed pad for excellent heat transfer x Integrated heat sink to simplify thermal management design for efficient heat dissipation x Long operation life. x Wide viewing angle. x Silicone encapsulation x Ease of mechanical mounting x Plug & Play assembly for ease of installation x Lead free and ROHS compliant x Illumination in vending machine Specifications x Refrigeration lighting x InGaN technology x Retail lighting x Smooth wide radiation pattern x Illumination for machine vision equipment Package Dimensions Light Strip ADJD-xM00 (3 LEDs) ADJD-xM01 (3 LEDs) ADJD-xM10 (4 LEDs) ADJD-xM21 (6 LEDs) Notes: 1. All dimensions are in millimeters. 2. Tolerance is ±0.1mm unless otherwise specified. 2 ADJD-xM30 (9 LEDs) 72.50 16.20 32.20 145.00 17.50 35.00 R1.6 290.0 ADJD-xM40 (12 LEDs) 145.0 72.5 14.9 24.2 35.0 3.0 R1.6 290.0 Light Ring & Round 290.0 1.6 ADJD-xMR0 (7 LEDs) Ø110.00 Ø4.00 49.50 ADJD-xMR3 (8 LEDs) Ø88.00 Ø140.00 R1.70 120˚ 66.80 3 Notes: 1. All dimensions are in millimeters. 2. Tolerance is ±0.1mm unless otherwise specified. Device Selection Guide (TJ = 25°C) [1] Module Type Luminous Flux, Φv [2,3] (lm) Color Cool White Strip Warm White Round Cool White Ring Round Warm White Ring No. of LEDs Part Number 3 ADJD-WM00 3 ADJD-WM01 4 ADJD-WM10 6 ADJD-WM21 9 ADJD-WM30 12 ADJD-WM40 3 ADJD-YM00 3 ADJD-YM01 4 ADJD-YM10 6 ADJD-YM21 9 ADJD-YM30 12 ADJD-YM40 7 ADJD-WMR0 8 ADJD-WMR3 7 ADJD-YMR0 8 ADJD-YMR3 Test Current Min. Typ. Max. (mA) Dice Technology 56.0 80.0 124.0 350 InGaN 56.0 70.0 95.0 350 InGaN 56.0 80.0 124.0 350 InGaN 56.0 70.0 95.0 350 InGaN Notes: 1. Applicable to a single unit of LED only. Data are based on ASMT-Mxx4 component level device only. 2. IV is the total luminous flux output as measured with an integrating sphere at 25ms mono pulse condition. 3. Flux tolerance is ±10 %. Part Numbering System Table 1. ADJD – x 1 M x 2x 3 – N x 4 x 5 x 6 x 7 x2x3 No. of LEDs Module Type Resistor Driving Condition Color Bin Selection 00 3 Strip No Current Maximum Flux Bin Selection 01 3 Strip Yes Voltage 10 4 Strip No Current 21 6 Strip Yes Voltage Packaging Option Minimum Flux Bin Selection Please refer to Table 1 Color W - Cool White Y - Warm White Note: 1. Please refer to Page 10 for selection details. 4 30 9 Strip No Current 40 12 Strip No Current R0 7 Round No Current R3 8 Ring No Current Absolute Maximum Ratings at TA = 25°C Parameter DC Forward Current ADJD[1] xM00 xM10 xMR0 xM40 xMR3 xM30 350 350 350 700 700 1050 Input Voltage [2] xM01 xM21 Units mA 12 12 V Operating Ambient Temperature Range -40 to +85 °C Storage Temperature Range -40 to +100 °C Note: 1.DC forward current. 2.Input Voltage only applicable for ADJD-xM01 and ADJD-xM21. Optical Characteristics at 350 mA (TJ = 25°C) [1] Part Number No. of LEDs ADJD-WM00 3 ADJD-WM01 3 ADJD-WM10 4 ADJD-WM21 6 ADJD-WM30 9 ADJD-WM40 12 ADJD-WMR0 7 ADJD-WMR3 8 ADJD-YM00 3 ADJD-YM01 3 ADJD-YM10 4 ADJD-YM21 6 ADJD-YM30 9 ADJD-YM40 12 ADJD-YMR0 7 ADJD-YMR3 8 Correlated Color Temperature, CCT (Kelvin) Viewing Angle 2θ½ [2] (Degrees) Luminous Efficiency (lm/W) Color Min Max Typ Typ Cool White 4000 10000 110 65 Warm White 2600 4000 110 57 Notes: 1. Applicable to a single unit of LED only. Data are based on ASMT-Mxx4 component level device only. 2. T½ is the off-axis angle where the luminous intensity is ½ the peak intensity. Electrical Characteristic at 350 mA (TJ = 25 °C) [1] Input Voltage Vin [2] (Volts) Forward Voltage VF (Volts) Dice Type Min. Typ. Max. Typ. Max. InGaN 2.8 3.5 4.0 10.2 12.0 Notes: 1. Applicable to a single unit of LED only. Data are based on ASMT-Mxx4 component level device only. 2. Input Voltage only applicable for ADJD-xM01 and ADJD-xM21. 5 Electrical Configuration ADJD-xM00 (3 LEDs) Pin 2 Pos + Pin 1 Neg - Pin Number[A] Configuration 1 Neg- 2 Pos+ - + Pin 1 2 ADJD-xM10 (4 LEDs) Pin 2 Pos + Pin 1 Neg - ADJD-xMR3 (8 LEDs) Pin 2 Pos + *Note: A. The above configuration is only applicable for ADJD-xM00 / ADJD-xM10 and ADJD-xMR3 ADJD-xMR0 (7 LEDs) VIn *Note: Connector is not applicable for ADJD-xMR0 6 Pin 1 Neg - ADJD-xM01 (3 LEDs) Pin Number [B] Configuration Pin 1 Pos+ Pin 2 Neg - 1 Neg- 2 Pos+ ADJD-xM21 (6 LEDs) + - Pin 1 2 NC + Pin 1 Pos+ Pin 2 Neg - *Note: B. The above configuration is only applicable for ADJD-xM01 and ADJD-xM21 ADJD-xM30 (9 LEDs) Pin 4 Pos + Pin 3 NC Pin 1 Neg – Pin 2 NC Pin Number [C] Configuration 1 Neg- 2 NC 3 NC 4 Pos+ ADJD-xM40 (12 LEDs) Pin 4 Pos + Pin 3 NC Pin 1 Neg – Pin 2 NC *Note: C. The above configuration is only applicable for ADJD-xM30 and ADJD-xM40 Recommend Female Connector: Tyco 173977-2 7 - NC Pin 1 2 Pin 3 4 1.4 1.2 WARM WHITE COOL WHITE RELATIVE LUMINOUS FLUX (NORMALIZED AT 350 mA) RELATIVE INTENSITY 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 480 530 580 630 WAVELENGTH - nm 680 730 FORWARD CURRENT - mA 0 0.5 1 1.5 2 2.5 FORWARD VOLTAGE - V 3 3.5 4 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 1.4 tp D= 0.05 0.10 0.25 0.50 1.00 IF T 1.0 1.2 0.8 0.6 0.4 0.2 0.0 0.00001 0.0001 0.001 0.01 0.1 1 PULSE DURATION, tp - sec -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 4. Radiation Pattern. PULSE CURRENT, IP - A PULSE CURRENT, IP - A t D= p T 50 100 150 200 250 300 350 400 450 500 DC FORWARD CURRENT - mA Figure 2. Relative Luminous Flux vs. Mono Pulse Current. 1.4 D= tp T tp IF T 1.0 0.8 D= 0.05 0.10 0.25 0.50 1.00 0.6 0.4 0.2 10 100 Figure 5. Maximum pulse current vs. ambient temperature. Derated based on TA = 25°C, RTJ-A = 50°C/W. 8 0.4 780 Figure 3. Forward Current vs. Forward Voltage. 1.2 0.6 0 430 NORMALIZED INTENSITY 0 0.8 0.2 Figure 1. Relative Intensity vs. Wavelength. 500 450 400 350 300 250 200 150 100 50 0 1 0.0 0.00001 0.0001 0.001 0.01 0.1 1 PULSE DURATION, tp - sec 10 100 Figure 6. Maximum pulse current vs. ambient temperature. Derated based on TA = 85°C, RTJ-A = 50°C/W. RELATIVE LIGHT OUTPUT (NORMALIZED AT 25°C) 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 WARM WHITE COOL WHITE -50 -25 0 25 50 75 JUNCTION TEMPERATURE, TJ - °C 100 125 Figure 7. Relative Light Output vs. Junction Temperature. 400 MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA 400 350 300 250 200 RTJ-A = 30°C/W RTJ-A = 40°C/W RTJ-A = 50°C/W 150 100 50 350 300 250 200 RTJ-MS = 10°C/W 150 100 50 0 0 0 20 40 60 80 100 AMBIENT TEMPERATURE, TA - °C 120 140 Figure 8. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 125°C, RTJ-A = 30°C/W, 40°C/W and 50°C/W. 0 20 40 60 80 100 120 METAL SLUG TEMPERATURE, TMS - °C 140 Figure 9. Maximum Forward Current vs. Metal Slug Temperature. Derated based on TJMAX = 125°C, RTJ-MS = 10°C/W. 10.70±0.10 TEMPERATURE 10 - 30 SEC. 217°C 200°C 8.40±0.10 255 - 260°C 3°C/SEC. MAX. 17.00±0.20 6°C/SEC. MAX. 150°C 1.00±0.10 3°C/SEC. MAX. 3.1±0.10 100 SEC. MAX. 60 - 120 SEC. 5.08±0.10 TIME Figure 10. Recommended Reflow Soldering. (Acc. to J-STD-020C) Figure 11. Recommended soldering land pattern. Notes: 1. For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN1060 Surface Mounting SMT LED Indicator Components. 2. All parametric charts are only applicable to ASMT-Mxx4 component level device only. 9 Option Selection Details Flux Bin Limit [x4, x5] Luminous Flux (lm) at IF = 350mA ADJD - x1 M x2x3 - N x4 x5 x6 x7 x4 – Minimum Flux Bin x5 – Maximum Flux Bin x6 – Color Bin Selection x7 - Packaging Option. Bin Min. Max. K 56.0 73.0 L 73.0 95.0 M 95.0 124.0 Notes: 1. Tolerance for each bin limits is ±10 %. 2. Applicable to a single unit of LED ASMT-Mxx4 only. Color Bin Selections [x6] Individual tray will contain parts from one color bin selection only. Cool White Warm White O Full Distribution O Full Distribution A A only A A only B B only B B only C C only C C only D D only D D only E E only E E only F F only F F only G G only N A and C only H H only P B and D only L A and G only Q E and C only M B and H only R F and D only N A and C only U E and F only P B and D only W C and D only Q E and C only Z A and B only R F and D only 1 A, B, C and D only S G and H only 4 C, D, E and F only U E and F only W C and D only Z A and B only 1 A, B, C and D only 2 G, H, A and B only 4 C, D, E and F only 10 Color Bin Limit Cool White Color Limits (Chromaticity Coordinates) Warm White Color Limits (Chromaticity Coordinates) Bin A X Y 0.367 0.400 0.362 0.372 0.329 0.345 0.329 0.369 Bin A X Y 0.452 0.434 0.488 0.447 0.470 0.414 0.438 0.403 Bin B X Y 0.362 0.372 0.356 0.330 0.329 0.302 0.329 0.345 Bin B X Y 0.438 0.403 0.470 0.414 0.452 0.384 0.424 0.376 Bin C X Y 0.329 0.369 0.329 0.345 0.305 0.322 0.301 0.342 Bin C X Y 0.407 0.393 0.418 0.422 0.452 0.434 0.438 0.403 Bin D X Y 0.329 0.345 0.329 0.302 0.311 0.285 0.305 0.322 Bin D X Y 0.395 0.362 0.407 0.393 0.438 0.403 0.424 0.376 Bin E X Y 0.303 0.333 0.307 0.311 0.283 0.284 0.274 0.301 Bin E X Y 0.381 0.377 0.387 0.404 0.418 0.422 0.407 0.393 Bin F X Y 0.307 0.311 0.311 0.285 0.290 0.265 0.283 0.284 Bin F X Y 0.373 0.349 0.381 0.377 0.407 0.393 0.395 0.362 Bin G X Y 0.388 0.417 0.379 0.383 0.362 0.372 0.367 0.400 Tolerance: ± 0.01 Bin H X Y 0.379 0.383 0.369 0.343 0.356 0.330 0.362 0.372 0.44 0.42 0.40 G 0.38 A 4.0k 0.36 4.5k C B H 0.34 5.6k Black Body Curve 0.32 7k D E 0.30 10k F 0.28 0.26 0.24 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 X - COORDINATE 0.48 0.46 0.44 Y - COORDINATE Y - COORDINATE Tolerance: ± 0.01 A 0.42 C 0.40 0.38 0.36 E 4.0k F 3.5k D Packaging Option [x7] Example Option Tray 11 Black Body Curve 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 X - COORDINATE Figure 13. Color bins (Warm White). 0 2.6k 0.34 Figure 12. Color bins (Cool White). Selection 3.0k B ADJD-WM40-NKMZ0 ADJD-MW40-Nxxxx – x4 = K – x5 = M – x6 = Z – x7 = 0 – Cool White, 12 LEDs Strip Minimum Flux Bin K Maximum Flux Bin M Color Bin A and B only Tray Option Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body (white plastic). DISCLAIMER: AVAGO’S PRODUCTS AND SOFTWARE ARE NOT SPECIFICALLY DESIGNED, MANUFACTURED OR AUTHORIZED FOR SALE AS PARTS, COMPONENTS OR ASSEMBLIES FOR THE PLANNING, CONSTRUCTION, MAINTENANCE OR DIRECT OPERATION OF A NUCLEAR FACILITY OR FOR USE IN MEDICAL DEVICES OR APPLICATIONS. CUSTOMER IS SOLELY RESPONSIBLE, AND WAIVES ALL RIGHTS TO MAKE CLAIMS AGAINST AVAGO OR ITS SUPPLIERS, FOR ALL LOSS, DAMAGE, EXPENSE OR LIABILITY IN CONNECTION WITH SUCH USE. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2005-2010 Avago Technologies Limited. All rights reserved. AV02-1120EN - June 25, 2010