ADSP-H5E1

ADSP-H5x1/H5x3 0.52” Single Digit PCB Based LED Display Datasheet Description Features This is 0.52” height single digit display. It utilizes AllnGaP Red, Orange, Yellow, Green and Deep Red chips. This device is halogenated.  High reliability  Excellent characters appearance  Available in CA and CC All devices are categorized for luminous intensity. The orange, yellow and green devices are categorized for color. Use of similar device categories will yield a uniform display.  RoHS Compliant  Gray top surface with white diffused segments. Ordering Information Red Green Yellow Orange Deep Red Description ADSP-H5E1 ADSP-H5G1 ADSP-H5Y1 ADSP-H5L1 ADSP-H5A1 Common Anode, Right Hand Decimal ADSP-H5E3 ADSP-H5G3 ADSP-H5Y3 ADSP-H5L3 ADSP-H5A3 Common Cathode, Right Hand Decimal Package Dimensions Notes: 1. All dimensions are in millimeter. 2. Unless otherwise stated, the tolerance is  0.25mm. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2005 Avago Technologies Pte. All rights reserved. Obsoletes Pub No. Pub Number - Date (10/10/2012) Circuit Diagram Absolute Maximum Ratings at TA = 25C Parameter Symbol Power Dissipation per segment or Dot Point (DP) PD Continuous Forward Current per segment IF Red/Yellow/ Orange/ Green/ Deep Red 52 Peak Forward Current per segment (1/10 Duty Cycle, 0.1m sec pulse width) Derating Linearly from 25°C per segment Units mW 20 mA 100 mA 0.21 mA/°C Reverse Voltage per segment or DP VR 5 V Operating Temperature TO -40 to 85 °C Storage Temperature TS -40 to 85 °C Wave solder Condition 1.6mm below body 260°C peak for 3 secs max For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2005 Avago Technologies Pte. All rights reserved. Obsoletes Pub No. Pub Number - Date (10/10/2012) Electrical / Optical Characteristic at TA = 25°C Red Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv – 40 – mcd IF = 10mA Peak Wavelength λp – 634 – nm IF = 20mA Dominant Wavelength λd – 625 – nm IF = 20mA Forward Voltage per segment / DP VF – 2.0 2.6 V IF = 20mA Reverse Current per segment / DP IR – – 100 µA VR = 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M 2:1 IF = 10mA Green Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv – 15 – mcd IF = 10mA Peak Wavelength λp – 570 – nm IF = 20mA Dominant Wavelength λd – 571 – nm IF = 20mA Forward Voltage per segment / DP VF – 2.0 2.6 V IF = 20mA Reverse Current per segment / DP IR – – 100 µA VR = 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M 2:1 IF = 10mA Yellow Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv – 33 – mcd IF = 10mA Peak Wavelength λp – 592 – nm IF = 20mA Dominant Wavelength λd – 587 – nm IF = 20mA Forward Voltage per segment / DP VF – 2.0 2.6 V IF = 20mA Reverse Current per segment / DP IR – – 100 µA VR = 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M 2:1 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2005 Avago Technologies Pte. All rights reserved. Obsoletes Pub No. Pub Number - Date (10/10/2012) IF = 10mA Orange Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv – 40 – mcd IF = 10mA Peak Wavelength λp – 610 – nm IF = 20mA Dominant Wavelength λd – 605 – nm IF = 20mA Forward Voltage per segment / DP VF – 2.0 2.6 V IF = 20mA Reverse Current per segment / DP IR – – 100 µA VR = 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M 2:1 IF = 10mA Deep Red Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv – 35 – mcd IF = 10mA Peak Wavelength λp – 644 – nm IF = 20mA Dominant Wavelength λd – 635 – nm IF = 20mA Forward Voltage per segment / DP VF – 2.0 2.6 V IF = 20mA Reverse Current per segment / DP IR – – 100 µA VR = 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M 2:1 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2005 Avago Technologies Pte. All rights reserved. Obsoletes Pub No. Pub Number - Date (10/10/2012) IF = 10mA Red Fig 1: Relative Luminous Intensity Vs Forward Current Fig 2: Forward Voltage Vs Current Fig 3: Relative Luminous Intensity Vs Wavelength For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2005 Avago Technologies Pte. All rights reserved. Obsoletes Pub No. Pub Number - Date (10/10/2012) Green Fig 1: Relative Luminous Intensity Vs Forward Current Fig 2: Forward Voltage Vs Current Fig 3: Relative Luminous Intensity Vs Wavelength For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2005 Avago Technologies Pte. All rights reserved. Obsoletes Pub No. Pub Number - Date (10/10/2012) Yellow Fig 1: Relative Luminous Intensity Vs Forward Current Fig 2: Forward Voltage Vs Current Fig 3: Relative Luminous Intensity Vs Wavelength For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2005 Avago Technologies Pte. All rights reserved. Obsoletes Pub No. Pub Number - Date (10/10/2012) Orange Fig 1: Relative Luminous Intensity Vs Forward Current Fig 2: Forward Voltage Vs Current Fig 3: Relative Luminous Intensity Vs Wavelength For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2005 Avago Technologies Pte. All rights reserved. Obsoletes Pub No. Pub Number - Date (10/10/2012) Deep Red Fig 1: Relative Luminous Intensity Vs Forward Current Fig 2: Forward Voltage Vs Current Fig3 : Relative Luminous Intensity Vs Wavelength For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2005 Avago Technologies Pte. All rights reserved. Obsoletes Pub No. Pub Number - Date (10/10/2012) Packing Tube Specifications: Tube Front View Tube Top View Reference For further information on soldering LEDs, please refer to Avago Technologies Application Note 1027. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2005 Avago Technologies Pte. All rights reserved. Obsoletes Pub No. Pub Number - Date (10/10/2012)