AEDB-9340-W-02-A

AEDB-9340 Series 1250/2500 CPR Commutation Encoder Modules with Codewheel Data Sheet Description The AEDB-9340 optical encoder series are six-channel optical incremental encoder modules with codewheel. The encoder is compliant to RoHS directive and had been declared as a lead free product. When used with codewheel, these modules detect rotary position. Each module consists of a collimated LED source and detector IC enclosed within a small plastic package. Due to highly collimated light source and unique photo detector array designs, these modules are extremely tolerant to mounting misalignment. The AEDB-9340 optical encoder has integrated commutation output (U, V, W), two-channel quadrature outputs plus a third channel index output (A, B, I). This ungated index output is a positive index pulse that is generated once for each full rotation of the codewheel. The AEDB-9340 series optical encoder is designed for use with a codewheel that has an optical radius of 15 mm (0.590 inch) for 1250/2500 CPR, 12.3 mm (0.484 inch) for 1024/2048 CPR and 12 mm (0.472 inch) for 1000/ 2000 CPR. The quadrature, index, commutation signals and power supplied to encoder are accessed through eight 0.46 mm square male connector pins located on 1.27 mm (pitch). The AEDB-9340 optical encoder provides advanced motion control detection with integrated commutation outputs (U, V, and W). It is equivalent to those produced by Hall Switches, thus making it ideal for servo motor application. With the AEDB-9340 solution, the system will be more compact, have reduced alignment time with usage of alignment jig, thus making assembly process much easier for housed encoder integration. It has superior switching accuracy due to much lower hysteresis when compared to a Hall Switches. The commutation signals can be generated for Brushless DC motor of different rotor pole-pairs by simply changing with matching pole-pair codewheel. Features • Two-channel quadrature output with ungated index pulse (A, B, I) • Three-channel integrated commutation output (U, V, W) • Up to 2500 Cycles Per Revolution (CPR) • Easy assembly with alignment jig • Designed to fit into circular shaped housing • Up to 150 kHz frequency response • –10°C to 85°C operating temperature • TTL compatible • Single 5 V supply • Integrated feedback device for Brushless DC Motor Applications Typical applications include industrial printers, plotters, tape drives, and industrial and factory automation equipment. Note: Avago Technologies encoders are not recommended for use in safety critical applications, e.g., ABS braking systems, power steering, life support systems and critical care medical equipment. Please contact sales representative if more clarification is needed. Theory of Operation The AEDB-9340 optical encoder is a emitter-detector module. Coupled with codewheel, these modules translate the rotary motion of a shaft into six-channel digital output. The modules contain a single Light Emitting Diode (LED) as light source. The light is collimated into a parallel beam by means polycarbonate lens located directly over the LED. Opposite the emitter is a detector IC. This IC consists of multiple sets of photo detectors and signal processing circuitry necessary to produce digital waveforms output. The codewheel rotates between the emitter and detector, causing the light beam to be interrupted by pattern of spaces and bars on the codewheel. The Photodiodes that detect these interruptions are arranged in a pattern that corresponds to the radius and design of the codewheel. These detectors are also spaced in such away that light period on one pair of detectors corresponds to dark period on adjacent pair of detectors. The photodiode outputs are then fed through the signal processing circuitry resulting in A, A, B, B, I, and I. Comparators receive these signals and produce the final outputs for channels A and B. Due to this integrated phasing technique, the digital output of channel A is in quadrature with that of channel B (90 degrees out of phase). The commutation feedback (U, V, W) signals are generated based on the codewheel design. Cycle Error (D C): An indication of cycle uniformity. The difference between an observed shaft angle which gives rise to one electrical cycle, and the nominal angular increment of 1/N of a revolution. Pulse Width (P): The number of electrical degrees that an output is high during 1 cycle. This value is nominally 180°e or 1/2 cycle. Pulse Width Error (D P): The deviation, in electrical degrees, of the pulse width from its ideal value of 180°e. State Width (S): The numbers of electrical degrees between transitions in the output of channel A and the neighboring transition in the output of channel B. There are 4 states per cycle, each nominally 90°e. State Width Error (D S): The deviation, in electrical degrees, of each state width from its ideal value of 90°e. Commutation Accuracy ( D I) : T he deviation, in mechanical degrees, after shaft rotates passing the reference point (Index channel) to the first Channel-U pulse. The measurement from middle of Channel-I to rising edge of Channel-U. Phase (f ): The numbers of electrical degrees between the center of the high state of channel A and the center of the high state of channel B. This value is nominally 90°e for quadrature output. This value is nominally 90°e for quadrature output. Phase Error (Df ): The deviation of the phase from its ideal value of 90°e. Direction of Rotation: When the codewheel rotates in the clockwise direction viewing from top of the module (direction from pin U to B), channel A will lead channel B. If the codewheel rotates in the opposite direction (direction from pin B to U), channel B will lead channel A. Optical Radius (Rop) : T he distance from the codewheel’s center of rotation to the optical center (O.C.) of the encoder module. Index Pulse Width (Po) : T he number of electrical degrees that an index is high with reference to channel A or channel B during one full shaft rotation. Definitions Cycles (N) : T he number of electrical cycles per revolution (CPR). Note: CPR refers to the raw signal from encoder, that is the cycles before 4x decode. One Cycle: 360 electrical degrees (°e). One Shaft Rotation: 360 mechanical degrees. 2 AEDB-9340 Technical Specifications Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Supply Voltage Symbol TS TA VCC Min. -40 -10 -0.5 Max. 85 85 7 Units °C °C Volts Notes Recommended Operating Conditions Parameter Temperature Supply Voltage (Detector) Operating Frequency 1250 CPR 2500 CPR Shaft Radial Play Plus Eccentricity Shaft Axial Play Min. -10 4.5 Typ. 25 5.0 Max. 85 5.5 75 150 ± 0.025 ± 0.100 Units °C Volts kHz kHz mm TIR mm Notes Ripple < 100 mVpp Velocity (rpm) x N/60 Electrical Characteristics Electrical Characteristics over Recommend Operating Range, Typical at 25°C Parameter Supply Current High Level Output Voltage Low Level Output Voltage Rise Time Fall Time Loading Capacitance Symbol ICC VOH VOL tr tf CLOAD Min. 40 2.4 Typ. 60 Max. 80 0.4 200 20 47 Units mA V V ns ns pF Notes CL = 14 pF Encoding Characteristics Encoding Characteristics over the Recommended Operating Conditions and Mounting tolerances. These characteristics include codewheel contribution. The typical values are average over the full rotation of the codewheel tested at 25°C, 500 RPM, 5V. Parameter Pulse Width Error Logic State Width Error Phase Error Cycle Error Position Error Index Pulse Width 1000/1024/1250 CPR 2000/2048/2500 CPR 3 Symbol DP DS Df DC DQ P0 P0 Minimum Typical 7 5 2 20 20 150 300 Maximum 50 50 25 50 50 360 540 Units °e °e °e °e min. of arc °e °e 90 180 Commutation Characteristics (Channel U, V, W) Encoding Characteristics over the Recommended Operating Conditions and Mounting Conditions. These characteristics include codewheel contribution. The typical values are average over the full rotation of the codewheel. Parameter Commutation Format Commutation Accuracy (Middle of Channel I to Channel U) Commutation Accuracy (Channel U,V and W) Symbol Minimum Maximum Three Phase 4, 6, or 8 poles -1 -2 +1 +2 Units DI D UVW °mechanical °mechanical Device Pinout Pin #1 start from left side. Pin 1 2 3 4 5 6 7 8 Function U I V W Ground VCC A B PIN #8 PIN #1 4 Package Dimensions 40.12 28.4 C L R 20.00 1.50 ∅ 1.000 ∅2 1.11 1.1 7.4 12.6 3.5 ∅ 1.000 R 22.00 0.50 19.75 33.4 CHAMFER 45° x 1.60 TOP VIEW Note: All dimensions are given in mm. Figure 1a. 1000/1024/1250/2000/2048/2500 CPR encoder module dimensions 5 Package Dimensions, continued 40.12 28.4 C L R 20.0 ∅ 1.000 1.50 ∅ 1.000 3.5 R 22.00 ∅2 12.6 1.1 7.4 19.923 33.4 10.4 9.300 9.300 37.42 ∅ 35.00 ∅ 12.00 10.000 TOP VIEW 9.75 0.50 Note: All dimensions are given in mm. Figure 2a. 1250/2500 CPR encoder module with codewheel dimensions 6 Mounting Considerations C L 25.40 12.70 ∅ 2.00 13.33 ∅ 16.00 BOTTOM VIEW RECOMMENDED SCREW SIZE: M1.6 x 0.35 RECOMMENDED MOUNTING SCREW TORQUE: 1Lbin (0.113 Nm) NOTES: 1. ALL DIMENSIONS ARE GIVEN IN mm. 2. USE ALIGNMENT TOOL HEDS-8952 TO MOUNT THE ENCODER WITH RESPECT TO SHAFT CENTER. 3. REFER TO AEDB-9340 SERIES APPLICATION NOTE FOR STEP BY STEP ALIGNMENT AND INSTALLATION PROCEDURE. Figure 2b. 1250/2500 CPR encoder mounting considerations 7 Package Dimensions 40.12 33.4 28.4 C L 3.5 ∅ 1.000 1.50 ∅ 1.000 ∅2 12.6 1.1 7.4 7.7 6.588 31.91 ∅ 29.40 ∅ 12.00 9.75 0.50 TOP VIEW NOTE: ALL DIMENSIONS ARE GIVEN IN mm. Figure 3a. 1024/2048 CPR encoder module with codewheel dimensions 8 Mounting Considerations 25.40 C L R 20.00 12.70 R 22.00 ∅ 2.00 10.62 2.71 ∅ 16.00 BOTTOM VIEW RECOMMENDED SCREW SIZE: M1.6 x 0.35 RECOMMENDED MOUNTING SCREW TORQUE: 1Lbin (0.113 Nm) NOTES: 1. ALL DIMENSIONS ARE GIVEN IN mm. 2. USE ALIGNMENT TOOL HEDS-8951 TO MOUNT THE ENCODER WITH RESPECT TO SHAFT CENTER. 3. REFER TO AEDB-9340 SERIES APPLICATION NOTE FOR STEP BY STEP ALIGNMENT AND INSTALLATION PROCEDURE. Figure 3b. 1024/2048 CPR encoder mounting considerations 9 Package Dimensions 40.12 28.4 C L 3.5 ∅ 1.000 1.50 ∅ 1.000 ∅2 12.6 1.1 7.4 7.41 33.4 6.300 6.300 31.42 ∅ 29.00 ∅ 12.00 10.000 9.75 0.50 TOP VIEW NOTE: ALL DIMENSIONS ARE GIVEN IN mm. Figure 4a. 1000/2000 CPR encoder module with codewheel dimensions 10 Mounting Considerations 25.40 C L R 20.00 12.70 R 22.00 ∅ 2.00 10.33 3.00 ∅ 16.00 BOTTOM VIEW RECOMMENDED SCREW SIZE: M1.6 x 0.35 RECOMMENDED MOUNTING SCREW TORQUE: 1Lbin (0.113 Nm) NOTES: 1. ALL DIMENSIONS ARE GIVEN IN mm. 2. USE ALIGNMENT TOOL HEDS-8950 TO MOUNT THE ENCODER WITH RESPECT TO SHAFT CENTER. 3. REFER TO AEDB-9340 SERIES APPLICATION NOTE FOR STEP BY STEP ALIGNMENT AND INSTALLATION PROCEDURE. Figure 4b. 1000/2000 CPR encoder module mounting considerations 11 1.80 ± .03 0.20 CODEWHEEL A 3.00 3.80 1.10 ± 0.5 12.50 5.50 14.33 HUB 6.03 0.80 SHAFT RIGHT VIEW NOTES: 1. ALL DIMENSIONS ARE GIVEN IN mm. 2. CODEWHEEL GAP IS ALIGNED AT 0.2 mm FROM DATUM A. Figure 5. 1000/1024/1250/2000/2048/2500 CPR encoder module and codewheel mounting considerations 12 Codewheel Mechanical Drawing A 12.50 5.50 + 0.01 ∅B– 0 ∅ 16.00 ∅B– 0 + 0.01 ∅ 12.00 ∅A 2-TAP M3 TILL HOLE ∅ 3.00 A NOTES: ALL DIMENSIONS ARE GIVEN IN MILLIMETERS (mm). ∅ B = HUB INTERNAL DIAMETER (BASED ON THE SHAFT DIAMETER OPTION SELECTED). ∅ A= CODEWHEEL OUTER DIAMETER. CODEWHEEL CPR 1250/2500 1024/2048 1000/2000 OUTER DIAMETER 35 mm 29.4 mm 29 mm SECTION A - A Figure 6. Codewheel and hub dimensions 13 Output Waveform Specifications P C B S1 S2 S3 S4 ø A 360e-DEG QUADRATURE SIGNALS A AND B I Po ∆I U 0 ± 1 MECHANICAL DEGREE V W S1 S2 S3 S4 S5 S6 180 MECH-DEG 30 MECH-DEG ONE ABSOLUTE MECHANICAL REVOLUTION (360 MECH-DEG) INDEX AND COMMUTATION SIGNALS Figure 7. Output waveform specification of 2 pole pairs (= 4 poles) for counterclockwise rotation, viewed from the top. Note: In the above waveform, quadrature signals A,B are not drawn to scale with respect to index pulse and commutation signals. Pole vs. State Width Table Pole 4 6 8 Number of States/ State Width Mechanical Revolution (Mechanical Degree) 12 30 18 20 24 15 14 Ordering Information Encoder Bundled with Codewheel AEDB-9340 – CPR # W = 2500 CPR U = 2048 CPR T = 2000 CPR L = 1250 CPR J = 1024 CPR B = 1000 CPR – 02 04 05 06 11 14 12 13 15 Shaft # = = = = = = = = = 3 mm 5/32 in 3/16 in 1/4 in 4 mm 5 mm 6 mm 8 mm 10 mm – Pole Pair # A – 2 Pole Pairs B – 3 Pole Pairs C – 4 Pole Pairs Encoder Only AEDS-9340 – CPR # W = 2500 CPR U = 2048 CPR T = 2000 CPR L = 1250 CPR J = 1024 CPR B = 1000 CPR – 00 Alignment Tool HEDS-8950 – Alignment tool for 1000/2000 CPR HEDS-8951 – Alignment tool for 1024/2048 CPR HEDS-8952 – Alignment tool for 1250/2500 CPR Note: Options highlighted in RED are currently available to order. Contact factory for enquiries on the rest of the options. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0248EN AV02-0075EN January 9, 2007