ALM-1412-BLKG

ALM-1412 GPS LNA-Filter Front-End Module Data Sheet Description Features Avago Technologies’ ALM-1412 is an LNA module, with integrated filter, designed for GPS band applications at 1.575GHz. The LNA uses Avago Technologies’ proprietary GaAs Enhancement-mode pHEMT process to achieve high gain with very low noise figure and high linearity. Noise figure distribution is very tightly controlled. A CMOS-compatible shutdown pin is included either for turning the LNA on/off, or for current adjustment. The integrated filter utilizes an Avago Technologies’ leadingedge FBAR filter for exceptional rejection at Cell/PCSBand frequencies. • • • • • • • • • The ALM-1412 is useable down to 1 V operation. It achieves low noise figure, high gain and linearity even at 1 V, making it suitable for use in critical low-power GPS applications or during low-battery situations. • Very Low Noise Figure: 0.82 dB typical High Gain: 13.5 dB typical High IIP3 and IP1dB Exceptional Cell/PCS-Band rejection Advanced GaAs E-pHEMT Technology Low external component count Wide Supply Voltage: 1 V to 3.6 V Shutdown current: < 0.1 μA CMOS compatible shutdown pin (SD) current @ 2.8 V: 0.1 mA Adjustable current via single external resistor/voltage Meets MSL3 and Lead-Free ESD-protected RF input: 3 kV HBM Small package dimension: 3.3(L)x2.1(W)x1.1(H) mm3 • GPS Band LNA • • • Component Image Specifications (Typical Performance at 25°C) Application RF_IN 1 10 Gnd 11 Gnd 12 VDD SURFACE MOUNT 3.3 x 2.1 x 1.1 mm3 12-Lead MCOB 1412 WWYY Gnd 2 9 Gnd 8 FILTER-OUT 7 Gnd Gnd 6 Gnd 5 Gnd 4 SD 3 12 VDD 11 Gnd 10 Gnd TOP VIEW Gnd 9 At 1.575 GHz, Vdd = 2.85 V, Idd = 8.0 mA • Gain = 13.5 dB • NF = 0.82 dB • IIP3 = +7.0 dBm, IP1dB = +2.7 dBm • S11 = -8.4 dB, S22 = -12.3 dB • Cell-Band Rejection: 54 dBc • PCS-Band Rejection: 63 dBc At 1.575 GHz, 1.0 V supply • S21 = 8.8 dB • NF = 1.22 dB • Idd = 1.9 mA 1 RF_IN FILTER-OUT 8 2 Gnd Gnd 7 Gnd 4 Gnd 5 Gnd 6 3 SD BOTTOM VIEW Note: Package marking provides orientation and identification “1412” = Product Code “YY” = Year of manufacture “WW” = Work Week of manufacture Attention: Observe precautions for handling electrostatic sensitive devices. For RF_IN (Pin 1): ESD Human Body Model = 3 kV All other pins: ESD Machine Model = 40 V ESD Human Body Model = 300 V Refer to Avago Technologies Application Note A004R: Electrostatic Discharge, Damage and Control Absolute Maximum Rating[1] TA = 25°C Symbol Parameter Units Absolute Max. Vdd Device Drain to Source Voltage[2] V 3.6 Idd Drain Current[2] mA 20 Pin,max CW RF Input Power (Vdd = 2.85 V, Idd = 9.0 mA) dBm 15 Pdiss Total Power Dissipation[4] mW 72 Tj Junction Temperature °C 150 TSTG Storage Temperature °C -65 to 150 T Recommended Operating Temperature °C -40 to 85 Thermal Resistance[3] (Vdd = 2.85 V, Idd = 9 mA), θjc = 352.2°C/W Notes: 1. Operation of this device in excess of any of these limits may cause permanent damage. 2. Assuming DC quiescent conditions. 3. Thermal resistance measured using Infra-Red measurement technique. 4. Board (module belly) temperature TB is 25°C. Derate 2.84 mW/°C for TB > 125°C. Electrical Specifications TA = 25°C, Vdd = +2.85V, Vsd = +2.6V, Idd = 8mA (typ), R2 = 10 kΩ, Freq = 1.575GHz - Typical Performance [8] unless otherwise specified. Table 1. Performance Table at Nominal Operating Conditions Symbol Parameter and Test Condition Units Min. Typ Max. G Gain dB 11 13.5 - NF[7] Noise Figure dB - 0.82 1.2 IP1dB Input 1 dB Compressed Power dBm - 2.7 - IIP3[9] Input 3rd Order Intercept Point (2-tone @ fc ± 2.5 MHz) dBm - 7.0 - S11 Input Return Loss dB - -8.4 - S22 Output Return Loss dB - -12.3 - S12 Reverse Isolation dB - -23 - Cell Band Rejection Relative to 1.575 GHz @ 827.5 MHz dBc 45 54 - PCS Band Rejection Relative to 1.575 GHz @ 1885 MHz dBc 45 63 - Idd Supply DC current at Shutdown (SD) Voltage Vsd = 2.6 V mA - 8.0 15 Ish Shutdown Current @ Vsd = 0 V μA - 0.1 - TA = 25°C, Vdd = +2.85V, Vsd = +1.8V, Idd = 4.5mA (typ), R2 = 10 kΩ, Freq = 1.575GHz - Typical Performance[8] unless otherwise specified. Table 2. Typical Performance at Vdd = +2.85V, Vsd = +1.8V, Idd = 4.5mA (typ) Symbol Parameter and Test Condition Units Typ. G Gain dB 12.2 NF[7] Noise Figure dB 0.94 IP1dB Input 1 dB Compressed Power dBm 4.5 IIP3[9] Input 3rd Order Intercept Point (2-tone @ fc ± 2.5 MHz) dBm 5.7 S11 Input Return Loss dB -7 S22 Output Return Loss dB -10.6 S12 Reverse Isolation dB -22.6 Cell Band Rejection Relative to 1.575 GHz @ 827.5 MHz dBc 55 PCS Band Rejection Relative to 1.575 GHz @ 1885 MHz dBc 61 Idd Supply DC Current at Shutdown (SD) Voltage Vsd = 1.8 V mA 4.5 Ish Shutdown Current @ Vsd = 0 V μA 0.1 Notes: 7. For noise figure measurement, input board loss has not been deducted. 8. Measurements at 1.575 GHz obtained using demo board described in Figures 6 and 7. 9. 1.575 GHz IIP3 test condition: FRF1 = 1572.5 MHz, FRF2 = 1577.5 MHz with input power of -20 dBm per tone measured at the worst case side band. 2 Vdd = +2 V, Vdd = +1.5 V, Vdd = +1 V, Freq = 1.575 GHz – Typical Performance[8] (Vsd = Vdd, R2 = 0 ohms) Table 3. Typical Performance at Low Operating Voltages with R2 (See Figures 6 and 7) Set to 0 ohms Symbol Parameter and Test Condition Units Vdd = 2 V Vdd = 1.5 V Vdd = 1 V G Gain dB 13.3 12.2 8.8 NF[7] Noise Figure dB 0.79 0.88 1.22 IP1dB Input 1 dB Compressed Power dBm -0.8 -1.5 -1.6 IIP3[9] Input 3rd Order Intercept Point (2-tone @ fc ± 2.5 MHz) dBm 8.4 6.3 4.8 S11 Input Return Loss dB -8.8 -7.4 -4.8 S22 Output Return Loss dB -12.4 -10.7 -7.8 S12 Reverse Isolation dB -21.3 -20.2 -17.7 Cell Band Rejection Relative to 1.575 GHz @ 827.5 MHz dBc 52.4 54.3 54.8 PCS Band Rejection Relative to 1.575 GHz @ 1885 MHz dBc 65.4 64.5 64.2 Idd Supply DC Current mA 9.8 5.6 1.9 Ish Shutdown Current @ Vsd = 0 V μA 0.1 0.1 0.1 Notes: 7. For noise figure measurement, input board loss has not been deducted. 8. Measurements at 1.575 GHz obtained using demo board described in Figures 6 and 7. 9. 1.575 GHz IIP3 test condition: FRF1 = 1572.5 MHz, FRF2 = 1577.5 MHz with input power of -20 dBm per tone measured at the worst case side band. 3 4 3 2 1 RF input RF output DC Pin Configuration of 4-pin Connector Pins pointing out of the page Circuit Symbol L1 L2 L3 C1 C2 C3 C9 R1 R2 Z1 Figure 1. Demoboard and application circuit components table 4 1 2 3 4 Size 0402 0402 0402 0805 0402 0402 0402 0402 0402 0805 Pins 1, 4 - GND Pin 2 = Shutdown (SD) Pin 3 = Vdd Supply Description Not Used 6.8 nH Inductor (Toko) 5.6 nH Inductor (Toko) 0.1 μF Capacitor (Murata) 10 pF Capacitor (Rohm) 6.8 pF Capacitor (Rohm) 100 pF Capacitor (Rohm) 12 Ohms Resistor (Rohm) 10k Ohms Resistor (Rohm) Not Used 1, 4 Vdd 3 GND R1 C1 L1 Z1 C2 L2 12 L3 50-Ohms TL 1 INPUT MATCH FILTER C9 50-Ohms TL 3 2, 4, 5, 6, 7, 9, 10, 11 R2 2 8 MODULE OUTLINE SD C3 Figure 2. Demoboard and application schematic diagram Notes: • • • • • • • • • • 5 The demoboard of Figure 6 is Rogers® RO4350 with typical Dk=3.48 (@10GHz). L3 and the module’s internal input pre-match form the input matching network. The RFin pin, pin 1, is directly connected to a shunt inductor that is grounded. The RF output filter blocks DC. This circuit demonstrates that very low noise figure is obtainable with standard 0402 chip inductors instead of high-Q wirewound inductors. C2 and L2 form a matching network at the output of the LNA stage, which can be tuned to optimize gain and return loss. For example, higher gain can be obtained by increasing the value of C2 but at the expense of stability. Changing the value of L2 can improve the PCS rejection, but impacts output return loss. L1 is a choke which isolates the demoboard from external disturbances during measurement. It is not needed in actual application. Likewise, C1 and C3 mitigate the effect of external noise pickup on the Vdd and SD lines respectively. These components are not required in actual operation. R1 is a stability-enhancing resistor. C9 is a DC-blocking capacitor. It is also not required in actual operation. Bias control is achieved by either varying the SD voltage (Vsd) with/without R2, or fixing the SD voltage to Vdd and adjusting R2 for the desired current. Typical value for R2 is 10k Ohms for 8 mA total current at Vdd = 2.85 V and Vsd = +2.60 V. For applications where it is more appropriate to have SD (Vsd) connected to Vdd, a 12 k Ohms resistor value for R2 is suggested (where Vdd = 2.85 V). For low-voltage operation such as Vdd = 1.5 V or 1.0 V, R2 may be omitted and SD (Vsd) connected directly to Vdd. The grounding regime for the ALM-1412 is critical to achieving the PCS- and Cell-Band Rejections shown in Figure 9. Please refer to the PCB Land Patterns section of this document for the exact locations of the grounding vias. ALM-1412 Typical Performance Curves, Vdd = +2.85 V, Vsd = +2.6V, Idd = 8mA (typ) (at 25°C unless specified otherwise) IRL freq= 1.575GHz dB(S(1,1))=-8.424 Gain freq= 1.575GHz dB(S(2,1))=13.513 ORL freq= 1.575GHz dB(S(2,2))=-12.300 ISO freq= 1.575GHz dB(S(1,2))=-23.466 20 Gain 10 0 IRL dB(S(2,2)) dB(S(2,1)) dB(S(1,2)) dB(S(1,1)) -10 -20 ORL ISO -30 -40 PCS CELL -50 -60 -70 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 freq, GHz CELL ind Delta= -7.475E8 dep Delta= -54.316 delta mode ON Figure 3. Typical S-Parameter plot Figure 4. Multiple module plots of rejecton at Cell and PCS Bands 6 PCS ind Delta= 3.100E8 dep Delta= -62.790 delta mode ON 1.9 ALM-1412 Typical Performance Curves, R2 = 10 kΩ (at 25°C unless specified otherwise) 20 18 14 NF (dB) GAIN (dB) 16 12 5mA 8mA 11mA 10 8 6 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 5mA 8mA 11mA 2.4 2.5 2.6 2.7 2.8 2.9 Vdd (V) 3.0 3.1 3.2 3.3 2.7 2.8 3.0 3.1 3.2 3.3 Vdd (V) Figure 6. NF vs. Vdd vs. Idd Figure 5. Gain vs. Vdd vs. Idd 12 8 IP1dB (dBm) IIP3 (dBm) 6 8 6 4 5mA 8mA 11mA 2 0 2.4 5mA 8mA 11mA 7 10 5 4 3 2 1 0 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 2.4 2.5 2.6 Vdd (V) Vdd (V) Figure 8. IP1dB vs. Vdd vs. Idd Figure 7. IIP3 vs. Vdd vs. Idd 12 Idd (mA) 10 8 6 4 2 0 1.6 1.8 2.0 2.2 2.4 2.6 Vsd (V) Figure 9. Idd vs. Vsd (Vdd = 2.85 V) 7 2.9 2.8 3.0 3.2 3.4 ALM-1412 Typical Performance Curves, R2 = 10 kΩ (at 25°C unless specified otherwise) 80 5mA 8mA 11mA 75 70 65 PCS BAND REJECTION (dBc) CELL BAND REJECTION (dBc) 80 60 55 50 45 70 65 60 55 50 45 40 40 2 .4 2 .5 2 .6 2 .7 2 .8 2 .9 Vdd (V) Figure 10. Cell band rejection vs. Vdd vs. Idd 8 5mA 8mA 11mA 75 3 .0 3 .1 3 .2 3 .3 2 .4 2 .5 2 .6 2. 7 2 .8 2 .9 Vdd (V) Figure 11. PCS band rejection vs. Vdd vs. Idd 3 .0 3 .1 3. 2 3 .3 ALM-1412 Typical Performance Curves, R2 = 10 kΩ (at 25°C unless specified otherwise) 20 -40°C 25°C 85°C 18 14 NF (dB) GAIN (dB) 16 12 10 8 6 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 2.4 -40°C 25°C 85°C 2.5 2.6 2.7 Vdd (V) Figure 12. Gain vs. Vdd vs. Temp (Idd = 8 mA) 3.2 3.3 6 IP1dB (dBm) 8 -40°C 25°C 85°C 7 6 4 5 4 3 2 2 1 0 0 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 2.4 3.3 2.5 2.6 2.7 2.8 2.9 Vdd (V) Vdd (V) Figure 14. IIP3 vs. Vdd vs. Temp (Idd = 8 mA) Figure 15. IP1dB vs. Vdd vs. Temp (Idd = 8 mA) 80 3.0 3.1 3.2 3.3 80 -40°C 25°C 85°C 75 70 65 PCS BAND REJECTION (dBc) CELL BAND REJECTION (dBc) 3.1 8 -40°C 25°C 85°C 10 60 55 50 45 40 2 .4 2.5 2 .6 2 .7 2 .8 2 .9 3 .0 3.1 Vdd (V) Figure 16. Cell band rejection vs. Vdd vs. Temp (Idd = 8 mA) 9 3.0 Figure 13. NF vs. Vdd vs. Temp (Idd = 8 mA) 12 IIP3 (dBm) 2.8 2.9 Vdd (V) 3 .2 3 .3 75 70 65 60 55 50 -40°C 25°C 85°C 45 40 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 Vdd (V) Figure 17. PCS band rejection vs. Vdd vs. Temp (Idd = 8 mA) 3.2 3.3 ALM-1412 Scattering Parameter and Noise Parameter Measurement R1 REFERENCE PLANE C1 L1 REFERENCE PLANE C2 L2 12 1 INPUT MATCH FILTER 8 3 R2 MODULE OUTLINE C3 Figure 18. Scattering and noise parameter reference planes 10 ALM-1412 Typical Scattering Parameters at 25°C, Vdd = 2.85 V, Vsd = +2.6V, Idd = 8mA (typ) The S- and Noise Parameters are measured using the PCB described in Figures 6 and 7. The PCB material is 10 mils Rogers® RO4350. Figure 23 shows the input and output reference planes. The circuit values, with the exception of L3, are as indicated in Figure 6. Freq. S11 S11 S21 S21 S21 S12 S12 S22 S22 (GHz) Mag. Ang. (dB) Mag. Ang. (dB) Ang. Mag. Ang. 0.3 0.9414 51.75 -49.77 0.0032 -82.50 -59.00 84.27 1.0023 -37.50 0.5 0.9810 14.17 -43.75 0.0065 -131.02 -60.91 54.30 1.0081 -62.37 0.7 0.9591 -10.49 -41.23 0.0087 178.63 -63.01 87.77 1.0077 -88.32 0.8 0.9388 -19.17 -42.09 0.0079 147.58 -64.55 123.93 1.0022 -100.80 0.8275 0.9413 -21.42 -40.90 0.0090 146.27 -62.48 -178.15 1.0000 -103.57 0.9 0.9349 -27.77 -41.36 0.0086 112.88 -56.91 -170.87 1.0069 -113.18 1.0 0.9441 -36.81 -40.49 0.0095 89.73 -74.17 -165.29 1.0017 -126.25 1.1 0.9572 -45.08 -38.82 0.0115 78.49 -67.03 -161.43 0.9907 -139.12 1.2 0.9507 -57.62 -39.07 0.0111 156.91 -59.29 -160.46 0.9923 -152.69 1.3 0.9015 -68.40 -39.84 0.0102 146.64 -60.70 -160.88 0.9829 -166.42 1.4 0.7906 -80.81 -45.10 0.0056 146.20 -55.58 168.45 0.9680 176.91 1.5 0.6713 -82.27 -34.14 0.0196 112.86 -54.66 155.19 0.7419 152.58 1.575 0.7112 -78.76 11.00 3.5490 -179.44 -24.28 141.36 0.2017 8.18 1.6 0.8218 -80.17 4.62 1.7030 16.26 -31.07 -119.97 0.5525 -118.95 1.7 0.6027 -96.78 -46.90 0.0045 -76.04 -59.93 165.69 0.9574 170.98 1.8 0.5047 -98.62 -51.12 0.0028 137.34 -54.87 152.40 0.9564 153.50 1.885 0.4471 -97.54 -48.14 0.0039 125.57 -51.80 147.55 0.9561 140.48 1.9 0.4373 -96.29 -46.03 0.0050 117.45 -53.03 145.64 0.9492 138.24 2.0 0.3906 -98.29 -42.75 0.0073 110.90 -53.46 146.79 0.9488 135.73 2.1 0.3534 -98.68 -39.84 0.0102 100.81 -54.69 145.47 0.9501 132.67 2.2 0.3250 -97.55 -37.92 0.0127 90.59 -52.67 145.94 0.9493 130.76 2.3 0.3017 -97.11 -36.71 0.0146 82.48 -50.18 140.43 0.9475 126.47 2.4 0.2839 -97.10 -35.73 0.0164 74.79 -51.46 138.69 0.9514 123.07 2.5 0.2674 -97.35 -35.47 0.0169 67.94 -48.85 136.17 0.9488 115.08 3.0 0.2097 -95.65 -44.33 0.0061 47.58 -46.49 71.43 0.9164 81.72 3.5 0.1691 -179.25 -19.72 0.1032 50.34 -46.47 42.11 0.8395 54.36 4.0 0.1230 -115.88 -6.17 0.4912 6.00 -28.93 -1.39 0.6672 4.25 4.5 0.1062 62.61 -2.49 0.7511 -31.75 -21.92 -38.31 0.6478 -111.97 5.0 0.2175 95.87 -1.53 0.8390 -75.46 -19.00 -79.92 0.6836 174.58 11 ALM-1412 Typical Scattering Parameters at 25°C, Vdd = 2.85 V, Vsd = +1.8V, Idd = 4.5mA (typ) Freq. S11 S11 S21 S21 S21 S12 S12 S22 S22 (GHz) Mag. Ang (dB) Mag. Ang. (dB) Ang. Mag. Ang. 0.3 0.9364 50.71 -53.96 0.0020 -75.83 -61.10 117.42 1.0036 -67.48 0.5 0.9751 15.23 -46.49 0.0047 -108.30 -60.19 130.25 1.0091 -92.35 0.7 0.9673 -6.10 -43.23 0.0069 172.32 -60.93 153.21 1.0081 -118.06 0.8 0.9594 -17.41 -44.12 0.0062 158.60 -65.24 157.05 1.0065 -130.84 0.8275 0.9620 -18.73 -42.71 0.0073 151.74 -64.92 160.63 1.0044 -143.78 0.9 0.9561 -25.18 -43.36 0.0068 143.86 -68.55 167.31 1.0109 -153.10 1.0 0.9702 -33.12 -42.08 0.0079 131.02 -69.59 168.93 1.0014 -156.24 1.1 0.9853 -45.50 -40.02 0.0100 102.19 -63.56 -167.21 0.9951 -159.18 1.2 0.9832 -55.01 -39.99 0.0100 83.16 -60.26 -164.86 0.9880 -162.29 1.3 0.9174 -66.05 -40.58 0.0094 158.44 -57.20 -168.56 0.9810 -166.49 1.4 0.7806 -74.79 -46.41 0.0048 144.44 -58.60 172.11 0.9707 176.62 1.5 0.6815 -75.29 -35.60 0.0166 113.76 -55.03 148.58 0.7437 152.64 1.575 0.7590 -67.75 9.47 2.9746 -173.00 -23.78 95.42 0.2765 36.80 1.6 0.8472 -77.47 3.74 1.5389 25.43 -29.97 -153.49 0.5556 -77.55 1.7 0.5954 -90.66 -47.04 0.0044 -87.32 -65.08 167.45 0.9606 160.90 1.8 0.5238 -88.12 -51.13 0.0028 147.21 -54.74 163.04 0.9551 143.44 1.885 0.4902 -88.21 -48.17 0.0039 125.81 -53.26 161.83 0.9588 131.24 1.9 0.4849 -88.08 -48.81 0.0036 122.10 -52.38 159.39 0.9499 129.02 2.0 0.4619 -89.75 -44.66 0.0059 117.06 -55.18 158.23 0.9509 125.92 2.1 0.4440 -91.88 -41.53 0.0084 109.11 -57.03 157.00 0.9500 122.66 2.2 0.4287 -92.90 -39.49 0.0106 103.36 -50.38 156.56 0.9506 119.90 2.3 0.4139 -93.21 -38.54 0.0118 100.64 -50.53 155.91 0.9502 116.38 2.4 0.4020 -93.65 -37.61 0.0132 95.20 -51.69 144.89 0.9528 113.17 2.5 0.3893 -94.26 -37.18 0.0138 84.68 -50.37 143.27 0.9480 110.07 3.0 0.3157 -97.95 -45.77 0.0051 50.49 -45.39 93.11 0.9165 88.75 3.5 0.2328 -128.95 -21.05 0.0886 35.94 -47.72 37.99 0.8401 44.39 4.0 0.1727 -150.95 -7.39 0.4273 8.77 -29.65 -8.04 0.6713 -4.21 4.5 0.1912 150.04 -3.65 0.6570 -32.72 -22.55 -51.38 0.6572 -72.14 5.0 0.2939 93.40 -2.66 0.7363 -64.48 -19.74 -85.59 0.6929 174.27 12 ALM-1412 Typical Noise Parameters at 25°C, Freq = 1.575 GHz, Vdd = 2.85 V, Vsd = +2.6V, Idd = 8mA (typ) ALM-1412 Typical Noise Parameters at 25°C, Freq = 1.575 GHz, Vdd = 2.85 V, Vsd = +1.8V, Idd = 4.5mA (typ) Freq Fmin Freq Fmin (GHz) (dB) Mag Ang Rn/50 (GHz) (dB) Mag Ang Rn/50 1.575 0.7 0.55 62 0.36 1.575 0.85 0.54 71 0.36 GAMMA OPT GAMMA OPT Notes: • The exceptional noise figure performance of the ALM-1412 is due to its highly optimized design. In this regard, the Fmin of the ALM-1412 shown above is locked down by the internal input pre-match. This allows the use of relatively inexpensive chip inductors for external matching. • The NF performance of the ALM-1412 is also very resilient to operating conditions. For example, at Idd = 4.5 mA, the degradation in NF is only 0.1 dB, and not more than 0.15 dB degradation over temperature. Part Number Ordering Information Part Number No. of Devices Container ALM-1412-BLKG 100 Antistatic bag ALM-1412 -TR1G 3000 13” Reel 13 Package Dimensions 2x–0.69 0.50 PIN 1 ORIENTATION 0.10 ALL EDGES 0.10 2x–0.28 0.07 GAPS 2x–0.28 1412 WWYY 2.10  0.10 0.60 1.55 5x–0.35 SQ 2x–0.47 2x–1.76 3.30  0.10 2x–0.20 1.10  0.10 7x–0.16 SIDE VIEW TOP VIEW BOTTOM VIEW NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS. 2. DIMENSIONS ARE INCLUSIVE OF PLATING. 3. DIMENSIONS ARE EXCLUSIVE OF MOLD FLASH AND METAL BURR. 2.521 A 1.991 A 1.473 0.688 2.921 0.00 REF. 0.157 REF. PCB Land Patterns and Stencil Design B C D 1.163 0.688 0.775 ∅ 0.200 0.337 0.037 0.712 0.283 0.670 0.300 1.550 0.702 0.600 0.727 0.950 1.900 0.600 E 0.00 REF. F A G 0.300 0.300 0.350 0.775 0.100 B F C D A G A 0.315 (SQUARE) B 0.280 x 0.306 mm C 0.257 x 0.306 mm D 0.303 x 0.367 mm E 0.544 x 0.492 mm F 0.824 x 0.618 mm G 0.257 x 0.617 mm Stencil outline drawing Dimensions are in mm A A B 3.100 Combined PCB land pattern and stencil outline 14 C D D 0.709 2.750 1.991 0.267 0.740 (For B and C) 0.00 REF. A E 0.00 REF. C 0.650 PCB land pattern and suggested grounding vias A B A 1.201 5x – 0.350 SQ A Device Orientation REEL USER FEED DIRECTION 1412 WWYY CARRIER TAPE 1412 WWYY USER FEED DIRECTION 1412 WWYY TOP VIEW END VIEW COVER TAPE Tape Dimensions P10 (3) P2 (1) P0 T D0 Y F 5 MAX. A F (1) W B0 SECTION Y - Y A0 Y X REF. R 0.25 REF. 0.50 K0 SECTION X - X REF. R 0.65 REF. R 0.25 DETAIL A 15 X P1 (2) NOTES: 1. MEASURE FROM CENTER LINE OF SPROCKET HOLE TO CENTER LINE OF POCKET. 2. MEASURE FROM CENTER LINE OF POCKET HOLE TO CENTER LINE OF POCKET. 3. PITCH TOLERANCE FOR SPROCKET HOLE: 10 PITCH CUMULATIVE TOLERANCE IS ± O.2 mm. 4. ALLOWABLE CAMBER TO BE 1 mm PER 250 mm IN LENGTH. D1 DIMENSIONS NOTATION MILLIMETERS A0 3.60 ± 0.10 B0 2.40 ± 0.10 K0 1.35 ± 0.10 D0 1.55 ± 0.05 D1 1.60 ± 0.10 P0 4.00 ± 0.10 P1 8.00 ± 0.10 P2 2.00 ± 0.10 P10 40.00 ± 0.20 E 1.75 ± 0.10 F 5.50 ± 0.10 W 12.00 ± 0.30 T 0.30 ± 0.05 Reel Dimensions - 13 inch 11 12 1 2 3 4 0 2 10 9 7 6 5 DATE CODE 12MM 8 EMBOSSED LETTERING 16.0mm HEIGHT x MIN. 0.4mm THICK. Ø329.0±1.0 HUB Ø100.0±0.5 6 PS 02 12 12 10 911 876534 MP N CPN EMBOSSED LETTERING 7.5mm HEIGHT EMBOSSED LETTERING 7.5mm HEIGHT 1.5 (MI N.) FRONT VIEW EMBOSSED LINE (2x) 89.0mm LENGTH LINES 147.0mm AWAY FROM CENTER POINT +0.5 -0.2 20.2(MIN.) Ø13.0 Ø16.0 ESD LOGO 6 PS RECYCLE LOGO 11.9-15.4** +2.0* 12.4 -0.0 Detail "X" SEE DETAIL "X" Ø100.0±0.5 Ø329.0±1.0 6 PS R19.0±0.5 BACK VIEW For product information and a complete list of distributors, please go to our website: SLOT 5.0±0.5(3x) Ø12.3±0.5(3x) 18.4 MAX.* www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. AV02-0205EN - March 2, 2012