APDS-9102-L22

APDS-9102 Integrated Reflective Sensor Data Sheet Description APDS-9102 is a low cost, fast switching speed reflective proximity sensor that incorporates an infrared LED and a phototransistor in a single integrated package. APDS9102 supports the detection distance of near 0 to approx 8mm, enabling to support a wide range of applications. Features • Detection distance of near 0mm to 8mm • Fast Switching Speed • Package size Height – 15.2 mm Width – 5 mm Depth – 17.8 mm • Operating temperature : -35˚C to 65˚C • Lead-free and RoHS Compliant Application Support Information The Application Engineering Group is available to assist you with the application design associated with APDS9102. You can contact them through your local sales representatives for additional details Applications APDS-9102 is widely suitable to provide reflective object or proximity sensing suitable for various applications in industrial, office automation and consumer markets. • Industrial – Automatic vending machines, amusement/ gaming machines, coin/bill validators etc • Office automation – Printers, Copiers etc • Consumer – Coffee machines, beverage dispensing machines etc Ordering Information Part Number APDS-902-L22 Package 4 pin leads Quantity 600  Absolute Maximum Ratings (Ta=25˚C) Parameter Infrared Diode Power Dissipation [] Peak Forward Current ( 300pps, 0 μs pulse) Continuous Forward Current Reverse Voltage Phototransistor Power Dissipation [] Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Operating Temperature Range Storage Temperature Range Lead Soldering Termperature (.6mm(0.063 ” ) From Case) Pc VCEO VECO IC TOP TSTG TS 00 30 5 20 mW V V mA -35˚C to +65˚C -40˚C to +00˚C 260˚C for 5 seconds PD ICP IF VR 75 3 50 5 mW A mA V Symbol Max Rating Unit Note: 1. Derate Linearly 1.33mW/ ˚C from 25˚C Electrical / Optical Characteristics (Ta=25˚C) Parameter Input Diode Forward Voltage Reverse Current Output Phototransistor Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Dark Current Coupler Collector-Emitter Saturation Voltage On State Collector Current [2] VCE(SAT) IC(ON) 0.6 0.4 V mA IC= 0.08mA, IF= 20mA VCE= 5V, IF= 20mA V(BR)CEO V(BR)ECO ICEO 30 5 00 V V nA IC= mA IE= 0.mA VCE= 0V VF IR .2 .6 00 V μA IF=20mA VR= 5V Symbol Min. Typ. Max. Unit Test Condition Note: 2. Reflective surface is Eastman Kodak(or equivalent) neutral white paper with 90% diffused reflectance placed at 3.81mm(0.15”) from read head. 2 APDS-9102 Package Outline APDS-9102 Block Diagram Pin 1 Pin 2 Pin 3 Pin 4 Test Circuit for Response Time NOTES: 1. All dimensions are in millimeters(inches) 2. Tolerance is ± 0.25mm(0.010”) unless otherwise noted 3. Specifications are subjected to change specifications without prior notice. Input RD Vcc RL Output I/O Pins Configuration Table The electrical pin assignments are depicted in the below table. Pin  2 3 4 Function Anode Cathode Emitter Collector Description LED Anode LED Cathode Phototransistor Emitter Phototransistor Collector Input Output GND tr td ts tf 90% 10% 3 APDS-9102 Performance Charts Typical Electrical/Optical Characteristics Curves (Ta=25˚C unless otherwise indicated) Figure 1. Power Dissipation vs. Ambient Temperature Figure 2. Forward Current vs. Forward Voltage Figure 3. Collector Current vs. Collector-emitter Voltage Figure 4. Collector Current vs. Ambient Temperature 4 Figure 5. Collector-emitter Saturation Voltage vs. Ambient Temperature Figure 6. Response Time vs. Load Resistance For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. AV02-0030EN - January 23, 2007