APDS-9103-L22

APDS-9103 Integrated Reflective Sensor Data Sheet Description The APDS-9103 is a low cost, integrated module consisting of an infrared LED and a phototransistor in a single integrated package. It is capable of supporting detection distance from near 0 to 10mm. APDS-9103 is specially targeted at office automation products such as printers and fax and optoelectronic switches as well. Features • Package size Height – 6 mm Width – 4 mm Depth – 10.6 mm • Detection range of near 0mm to 10mm • Operating temperature : -25˚C to 85˚C • Lead-free and RoHS Compliant Application Support Information The Application Engineering Group is available to assist you with the application design associated with APDS9103. You can contact them through your local sales representatives for additional details Applications APDS-9103 is widely suitable to provide reflective object or proximity sensing in industrial, office automation and consumer markets • Industrial – Automatic vending machines, amusement/ gaming machines, coin/bill validators etc • Office automation – Printers, Copiers etc • Consumer – Coffee machines, beverage dispensing machines etc Ordering Information Part Number APDS-903-L22 Package 4 pin leads Quantity 2500  Absolute Maximum Ratings (Ta=25˚C) Parameter Input Diode Power Dissipation Peak Forward Current ( 300pps, 0 μs pulse) Continuous Forward Current Reverse Voltage Output Phototransistor Power Dissipation Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Operating Temperature Range Storage Temperature Range Lead Soldering Termperature (.6mm(0.063 ” ) Form Case) Pc VCEO VECO IC TOP TSTG TS 00 30 5 20 mW V V mA -25˚C to +85˚C -40˚C to +00˚C 260˚C for 5 seconds PD ICP IF VR 75  60 5 mW A mA V Symbol Max Rating Unit Electrical / Optical Characteristics (Ta=25˚C) Parameter Input Diode Forward Voltage Reverse Current Output Phototransistor Collector-Emitter Dark Current Coupler Collector-Emitter Saturation Voltage On State Collector Current VCE(SAT) IC(ON) IC(ON) IC(ON) Response Time (Rise Time) Response Time(Fall Time) TR TF 00 260 400 3 4 0.4 300 650 200 5 20 V μA μA μA μs μs IC= 0.05mA IF= 20mA VCE= 5V IF= 20mA D = 3.0mm VCE= 5V IC= 2mA RL= 00Ω BIN A BIN B BIN C ICEO 00 nA VCE= 0V VF IR .2 .6 00 V μA IF=20mA VR= 5V Symbol Min. Typ. Max. Unit Test Condition 2 APDS-9103 Package Outline NOTES: 1. All dimensions are in millimeters(inches) 2. Tolerance is ± 0.25mm(0.010”) unless otherwise noted APDS-9103 Block Diagram Pin 1 Pin 3 I/O Pins Configuration Table The electrical pin assignments are depicted in the below table. Pin Function Emitter Collector Anode Cathode Description Phototransistor Emitter Phototransistor Collector LED Anode LED Cathode  2 3 4 Pin 2 Pin 4 3 Test Circuit and Waveforms Input Vcc RD RL Output Input Output GND tr td ts tf 90% 10% 90% Reflectance White Paper d 4 APDS-9103 Performance Charts Typical Electrical/Optical Characteristics Curves (Ta=25˚C unless otherwise indicated) Figure 1. Power Dissipation vs. Ambient Temperature Figure 2. Forward Current vs. Forward Voltage Figure 3. Collector Current vs. Collector-emitter Voltage Figure 4. Collector Current vs. Ambient Temperature Figure 5. Collector-emitter Saturation Voltage vs. Ambient Temperature 5 Figure 6. Relative Collector Current vs. Object Distance Figure 7. Response Time vs. Load Resistance For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. AV02-0007EN - January 22, 2007