APDS-9104

APDS-9104 Integrated Reflective Sensor Data Sheet Description The APDS-9104 is a low cost, fully integrated module targeting at object sensing or non-contact switching applications. The module consists of an infrared LED and a phototransistor in a single integrated package. It is capable of supporting detection distance from near 0 to 12mm. Features • For Direct PC Board or dual-in-line socket mounting • Fast switching speed • Detection range of near 0 to 12mm • Package size Height – 5.6 mm Width – 4.5 mm Depth – 8.7 mm • Operating temperature : -25˚C to 85˚C • Lead-free and RoHS Compliant Application Support Information The Application Engineering Group is available to assist you with the application design associated with APDS9104. You can contact them through your local sales representatives for additional details Applications APDS-9104 is widely suitable to provide a reflective high speed object detection or non-contact switching suitable for various applications in industrial, office automation, consumer and other applications. • Industrial – Automatic vending machines, amusement/ gaming machines, coin/bill validators etc • Office automation – Printers, Copiers etc • Consumer – Coffee machines, beverage dispensing machines etc Ordering Information Part Number APDS-904-L22 Package 4-leads Quantity 2500  Absolute Maximum Ratings (Ta=25˚C) Parameter Input Diode Power Dissipation Peak Forward Current (300pps, 0 μs pulse) Continuous Forward Current Reverse Voltage Output Phototransistor Power Dissipation Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Operating Temperature Range Storage Temperature Range Lead Soldering Termperature (.6mm(0.063 ” ) Form Case) PC VCEO VECO IC TOP TSTG TS 00 30 5 20 mW V V mA -25˚C to +85˚C -40˚C to +00˚C 260˚C for 5 seconds PD ICP IF VR 90  60 5 mW A mA V Symbol Max Rating Unit Electrical / Optical Characteristics (Ta=25˚C) Parameter Input Diode Forward Voltage Reverse Current Output Phototransistor Collector-Emitter Dark Current Coupler Collector-Emitter Saturation Voltage On State Collector Current VCE(SAT) IC(ON) IC(ON) IC(ON) IC(ON) 200 300 500 800 0.4 400 600 000 600 V μA μA μA μA IC= 0.2mA, IF= 20mA VCE= 5V IF= 20mA D = 3.5m (90% Reflective White Paper) BIN A BIN B BIN C BIN D ICEO 00 nA VCE= 0V VF IR .2 .6 00 V μA IF=20mA VR= 5V Symbol Min. Typ. Max. Unit Test Condition 2 APDS-9104 Package Outline NOTES: 1. All dimensions are in millimeters(inches) 2. Tolerance is ± 0.25mm(0.010”) unless otherwise noted 3. Lead spacing is measured where the leads emerge from the package APDS-9104 Block Diagram Pin 1 Pin 3 I/O Pins Configuration Table The electrical pin assignments are depicted in the below table. Pin function Cathode Anode Collector Emitter Description LED Cathode LED Anode Phototransistor Collector Phototransistor Emitter  2 3 4 Pin 2 Pin 4 3 APDS-9104 Performance Charts Typical Electrical/Optical Characteristics Curves (Ta=25˚C unless otherwise indicated) Figure 1. Normalized Collector Current vs. Object Distance Figure 2. Collector Current vs. Collector Voltage Figure 3. Rise and Fall time vs. Load Resistance Figure 4. Forward Current vs. Collector-emitter Saturation Voltage For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. AV02-0008EN - January 22, 2007