ASMT-AB00-NLN00

ASMT-Ax00 1W Power LED Light Source Data Sheet Description Features The ASMT-Ax00 series of 1W Power LEDs are high performance energy efficient devices which can handle high driving current and high temperatures. The exposed pad design enables excellent heat transfer from the package to the motherboard. An electrically isolated metal slug option is also available. • Available in Red, Red Orange, Amber, Blue, Royal Blue, Cyan, Green, Cool White, Neutral White and Warm White color The White Power LED is available with color temperatures ranging from 2700K to 10000K. The low profile package design is suitable for a wide variety of applications especially where height is a constraint and the package foot print is compatible with most high power LEDs available in the market today. This package is compatible with reflow soldering process. • Energy efficient • Exposed metal slug for excellent heat transfer • Compatible with reflow soldering process • High current operation • Long operation life • Wide viewing angle at 140° • Silicone encapsulation • Non-ESD sensitive (threshold > 16 kV) • MSL 2a products Applications • Architectural lighting • Channel backlighting • Contour lighting • Retail Display lighting • Decorative lighting • Garden lighting Package Dimensions 7.4 1.1 Ø 6.0 7.4 1.5 2.3 Ø 8.0 Metal Slug BOTTOM VIEW TOP VIEW Anode Lead 0.5 4.1 (ref:) 3.0 2.0 Cathode Lead 6.0 Metal Slug 13.8 ± 0.2 Figure 1. ASMT-Ax00 package outline drawing. Notes: 1. All dimensions in millimeters. 2. Metal slug is connected to anode for electrically non-isolated option. 3. Tolerance is ±0.1 mm unless otherwise specified. 4 . Terminal Finish: Ag plating Part Numbering System ASMT – A x100 – x 2 x3 x4 x5 x6 Packaging Option Color Bin Selection Maximum Flux Bin Selection Minimum Flux Bin Selection Dice Type N – InGaN A – AllnGaP Color R – Red H – Red Orange A – Amber G – Green C - Cyan B – Blue L – Royal Blue W – Cool White N – Neutral White Y – Warm White Note: 1. Please refer to Page 10 for selection details. 2 Lens Body Device Selection Guide (Tj = 25 °C) Luminous Flux (lm) / Radiometric Power (mW), ΦV [1,2] Part Number Color Min. Typ. Max. Test Current (mA) ASMT-AR00-ARS00 Red 39.8 50.0 67.2 350 AllnGaP No [3] 51.7 65.0 87.4 ASMT-AR00-AST00 Dice Technology Electrically Isolated Metal Slug ASMT-AH00-ARS00 Red Orange 39.8 50.0 67.2 350 AllnGaP No [3] ASMT-AA00-ARS00 Amber 39.8 50.0 67.2 350 AllnGaP No [3] ASMT-AB00-NMP00 Blue 13.9 20.0 30.6 350 InGaN Yes ASMT-AL00-NNP00 Royal Blue 275 mW 350 mW 435 mW 350 InGaN Yes ASMT-AL00-NNQ00 275 mW 355 mW 515 mW ASMT-AC00-NSU00 Cyan 51.7 75.0 99.6 350 InGaN Yes ASMT-AG00-NST00 Green 51.7 65.0 87.4 350 InGaN Yes ASMT-AG00-NUV00 87.4 105.0 113.6 ASMT-AW00-NUV00 Cool White 87.4 90.0 113.6 350 InGaN Yes ASMT-AN00-NUV00 Neutral White 87.4 90.0 113.6 350 InGaN Yes ASMT-AY00-NTU00 Warm White 67.2 80.0 99.6 350 InGaN Yes 67.2 85.0 113.6 ASMT-AY00-NTV00 Notes: 1. ΦV is the total luminous flux / radiometric power output as measured with an integrating sphere at 25 ms mono pulse condition. 2. Flux and power tolerance is ±10 %. 3. Electrically isolated metal slug option is also available. Please contact your Avago sale representative. Absolute Maximum Ratings Parameter AllnGaP InGaN InGaN Cyan Units DC Forward Current [1] 500 500 500 mA Peak Pulsing Current [2] 1000 1000 1000 mA Power Dissipation 1230 1830 1980 mW LED Junction Temperature 125 135 135 °C Operating Ambient Temperature Range at 350mA -40 to +115 -40 to +120 -40 to +120 °C Storage Temperature Range -40 to +120 -40 to +120 -40 to +120 °C Soldering Temperature Reverse Volttage [3] Notes: 1. Derate linearly based on Figure 10 for AlInGaP and Figure 22 for InGaN. 2. Pulse condition duty factor = 10%, Frequency = 1 kHz. 3. Not designed for reverse bias operation 3 Refer to Figure 26 Not recommended Optical Characteristics at 350 mA (TJ = 25 °C) Peak Wavelength, lPEAK (nm) Dominant Wavelength, lD [1] (nm) Viewing Angle, 2q½ [2] (°) Luminous Efficiency (lm/W) Part Number Color Typ. Typ. Typ. Typ. ASMT-AR00-ARS00 Red 635 625 140 68 635 625 140 88 ASMT-AR00-AST00 ASMT-AH00-ARS00 Red Orange 625 615 140 68 ASMT-AA00-ARS00 Amber 598 590 140 68 ASMT-AG00-NST00 Green 519 525 140 58 519 525 140 94 ASMT-AG00-NUV00 ASMT-AC00-NSU00 Cyan 497 500 140 63 ASMT-AB00-NMP00 Blue 454 460 140 18 ASMT-AL00-NNP00 Royal Blue 450 455 140 Not applicable 450 455 140 Not applicable Correlated Color Temperature, CCT (Kelvin) Viewing Angle, 2q½ [2] (°) Luminous Efficiency (lm/W) ASMT-AL00-NNQ00 Part Number Color Min. Max. Typ. Typ. ASMT-AW00-NUV00 Cool White 4500 10000 140 80 ASMT-AN00-NUV00 Neutral White 3500 4500 140 80 ASMT-AY00-NTU00 Warm White 2700 3500 140 71 2700 3500 140 76 ASMT-AY00-NTV00 Notes: 1. The dominant wavelength, lD, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. q½ is the off-axis angle where the luminous intensity is ½ the peak intensity. Electrical Characteristic at 350 mA (TJ = 25 °C) Forward Voltage, VF (Volts) Thermal Resistance, Rθj-ms(°C/W) [1] Dice Type Min. Typ Max. Typ. AllnGaP 1.7 2.1 2.3 10 InGaN (non-Cyan colors) 2.8 3.2 3.5 10 InGaN Cyan 3.0 3.4 3.8 10 Notes: 1. Rθj-ms is Thermal Resistance from LED junction to metal slug. 4 1 0.9 AMBER 0.8 RED ORANGE RED 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 530 545 560 575 590 605 620 635 650 665 680 WAVELENGTH - nm 0 0.5 1 1.5 2 FORWARD VOLTAGE - V Figure 4. Forward Current vs. Forward Voltage. PULSE CURRENT, IP - A 0.8 0.6 0.4 0 0 100 D= tp T tp 1.0 T 500 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 5. Radiation Pattern for Red, Red Orange and Amber. 1.2 IF D= 0.05 0.10 0.25 0.50 1.00 0.8 0.6 0.4 D= tp T tp 1.0 T IF D= 0.05 0.10 0.25 0.50 1.00 0.8 0.6 0.4 0.2 0.0 0.0 0.00001 0.0001 200 300 400 DC FORWARD CURRENT - mA Figure 3. Relative Luminous Flux vs. Mono Pulse Current. 3 0.2 0.001 0.01 0.1 1 PULSE DURATION, tp - sec Figure 6. Maximum pulse current vs. pulse duration. Derated based on TA = 25°C, RθJ-A = 50°C/W. 5 1 1.4 1.4 1.2 2.5 1.2 0.2 NORMALIZED INTENSITY 500 450 400 350 300 250 200 150 100 50 0 1.4 PULSE CURRENT, IP - A FORWARD CURRENT - mA Figure 2. Relative Intensity vs. Wavelength for Red, Red Orange and Amber. 1.6 RELATIVE LUMINOUS FLUX (NORMALIZED AT 350 mA) RELATIVE INTENSITY AlInGaP 10 100 0.00001 0.0001 0.001 0.01 0.1 1 PULSE DURATION, tp - sec Figure 7. Maximum pulse current vs. pulse duration. Derated based on TA = 85°C, RθJ-A = 50°C/W. 10 100 FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25°C) 0.1 RELATIVE LIGHT OUTPUT (%) (NORMALIZED AT 25°C) 120 110 100 90 80 70 60 50 40 30 20 10 0 AMBER RED-ORANGE RED 25 50 75 100 JUNCTION TEMPERATURE, TJ -°C -0.1 -0.15 AMBER RED RED-ORANGE -0.2 -0.25 25 50 75 100 JUNCTION TEMPERATURE, TJ -°C 125 Figure 9. Forward Voltage Shift vs. Junction Temperature. 600 MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA -0.05 -0.3 600 500 400 300 RθJ-A = 30°C/W RθJ-A = 40°C/W RθJ-A = 50°C/W 200 100 0 20 40 60 80 100 AMBIENT TEMPERATURE, T A - °C 120 Figure 10. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 125°C, RθJ-A = 30°C/W, 40°C/W and 50°C/W. 6 0 125 Figure 8. Relative Light Output vs. Junction Temperature. 0 0.05 140 500 400 RθJ-MS = 10°C/W 300 200 100 0 0 20 40 60 80 100 120 METAL SLUG TEMPERATURE, T MS - °C Figure 11. Maximum Forward Current vs. Metal Slug Temperature. Derated based on TJMAX = 125°C, RθJ-MS = 10°C/W. 140 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 COOL WHITE NEUTRAL WHITE WARM WHITE 380 480 580 WAVELENGTH - nm 680 1 0.9 GREEN 0.8 CYAN 0.7 BLUE ROYAL BLUE 0.6 0.5 0.4 0.3 0.2 0.1 0 380 405 430 455 480 505 530 555 580 605 630 WAVELENGTH - nm RELATIVE INTENSITY RELATIVE INTENSITY InGaN 780 Figure 12. Relative Intensity vs. Wavelength for Cool and Warm White. Figure 13. Relative Intensity vs. Wavelength for Blue, Royal Blue, Cyan and Green. 1.4 FORWARD CURRENT - mA RELATIVE LUMINOUS FLUX (NORMALIZED AT 350 mA) 1.2 1 0.8 0.6 0.4 0.2 0 0 100 200 300 400 DC FORWARD CURRENT - mA 500 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES Figure 16. Radiation Pattern for Blue, Royal Blue, Cyan and Green. 7 GREEN WHITE BLUE ROYAL BLUE CYAN 0 0.5 1 1.5 2 2.5 FORWARD VOLTAGE - V 3 3.5 4 Figure 15. Forward Current vs. Forward Voltage. NORMALIZED INTENSITY NORMALIZED INTENSITY Figure 14. Relative Luminous Flux vs. Mono Pulse Current. 500 450 400 350 300 250 200 150 100 50 0 90 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 17. Radiation Pattern for Cool White, Neutral White and Warm White. t D= p T PULSE CURRENT, IP - A 1.2 1.4 tp IF T 1.2 D= 0.05 0.10 0.25 0.50 1.00 1.0 0.8 PULSE CURRENT, IP - A 1.4 0.6 0.4 D= tp tp T 0.0 0.00001 0.0001 0.8 0.6 0.4 0.001 0.01 0.1 1 10 0.0 0.00001 0.0001 100 0.1 1 10 100 0.15 BLUE ROYAL BLUE CYAN GREEN WHITE 25 50 75 100 125 JUNCTION TEMPERATURE,TJ - °C 0.05 WHITE BLUE ROYAL BLUE -0.05 -0.15 -0.25 GREEN CYAN -0.35 -0.45 150 Figure 20. Relative Light Output vs. Junction Temperature. 25 50 75 100 125 JUNCTION TEMPERATURE,TJ - °C 150 Figure 21. Forward Voltage Shift vs. Junction Temperature. 600 MAX ALLOWABLE DC CURRENT - mA 600 500 400 300 RθJ-A = 30°C/W RθJ-A = 40°C/W RθJ-A = 50°C/W 200 100 0 0.01 Figure 19. Maximum pulse current vs. pulse duration. Derated based on TA = 85°C, RθJ-A = 50°C/W. FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25°C) RELATIVE LIGHT OUTPUT (%) (NORMALIZED AT 25°C) Figure 18. Maximum pulse current vs. pulse duration. Derated based on TA = 25°C, RθJ-A = 50°C/W. 120.0 110.0 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 0.0 0.001 PULSE DURATION, tp - sec PULSE DURATION, tp - sec MAX ALLOWABLE DC CURRENT - mA D= 0.05 0.10 0.25 0.50 1.00 1.0 0.2 0.2 0 25 50 75 100 AMBIENT TEMPERATURE, T A - °C 125 Figure 22. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 135°C, RθJ-A = 30°C/W, 40°C/W and 50°C/W. 8 IF T 150 500 400 RθJ-MS = 10°C/W 300 200 100 0 0 25 50 75 100 125 METAL SLUG TEMPERATURE, T MS - °C Figure 23. Maximum Forward Current vs. Metal Slug Temperature. Derated based on TJMAX = 135°C, RθJ-MS = 10°C/W. 150 1.60 4.38 8.80 14.10 2.65 Ø 6.40 ∅5.8 1.10 Figure 25. Recommended pick and place nozzle tip. Inner diameter = 5.8 mm. Figure 24. Recommended soldering land pattern TEMPERATURE 10 to 30 SEC. 217°C 200°C 255 - 260°C 3°C/SEC. MAX. 6°C/SEC. MAX. 150°C 3°C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Figure 26. Recommended Reflow Soldering Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN1060 Surface Mounting SMT LED Indicator Components. 9 Option Selection Details Flux / Power Bin Limit [x3, x4] Color Bin ID Luminous Flux (lm) / Radiometric Power (mW) at 350 mA Min. Max. Blue K 8.2 10.7 L 10.7 13.9 M 13.9 18.1 N 18.1 23.5 P 23.5 30.6 Q 30.6 39.8 R 39.8 51.7 S 51.7 67.2 T 67.2 87.4 U 87.4 99.6 V 99.6 113.6 W 113.6 129.5 M 225.0 275.0 N 275.0 355.0 P 355.0 435.0 Q 435.0 515.0 ASMT-Ax100 – x2 x3 x4 x5 x6 x3 – Minimum Flux Bin Selection x4 – Maximum Flux Bin Selection x5 – Color Bin Selection x6 – Packaging Option Other Colors Royal Blue Color Bin Selection [x5] Tolerance for each bin limits is ±10 % Individual reel will contain parts from one full bin only. Cool White Warm White Selection Bin ID Selection Bin ID 0 Full Distribution 0 Full Distribution E VM, UM, VN and UN E NM, MM, N1 and M1 F WM, VM, WN and VN F PM, NM, P1 and N1 G XM, WM, XN and WN G QM, PM, Q1 and P1 H UN, VN, U0 and V0 H M1, N1, M0 and N0 J WN, VN, W0 and V0 J P1, N1, P0 and N0 K XN, WN, X0 and W0 K Q1, P1, Q0 and P0 L V0, U0, VP and UP L N0, M0, NA and MA M W0, V0, WP, VP and WQ M P0, N0, PA and NA N X0, W0, XP, WP and WQ N Q0, P0, QA and PA P Y0 Q YA Neutral White Selection Bin ID 0 Full Distribution E SM, RM, S1 and R1 F TM, SM, TN and S1 G S1, R1, S0 and R0 H TN, S1, T0 and S0 J S0, R0, SA and RA K T0, S0, TP and SA 10 Other Colors Selection Bin ID 0 Full Distribution Z A and B Y B and C W C and D V D and E U E and F Q A, B and C P B, C and D N C, D and E M D, E and F 0.42 0.48 4500K 5000K Y-COORDINATE 0.38 5650K 6300K 0.36 7000K 0.34 0.32 XN X0 10000K Y0 0.30 XP U0 UP VP WP WQ BLACK BODY CURVE 0.28 0.30 0.32 0.34 X-COORDINATE 0.36 0.38 0.40 0.44 4100K Y-COORDINATE 0.42 4500K 3800K S1 TN SA R1 R0 S0 T0 3500K RM SM TM 0.36 RA BLACK BODY CURVE TP 0.34 0.32 0.34 0.36 0.38 0.40 X-COORDINATE Figure 29. Color bin structure for Neutral White. 11 0.40 Q0 P0 PA NA NM M1 N1 P1 Q1 M0 N0 MA QA BLACK BODY CURVE 0.32 0.38 0.40 0.42 0.44 0.46 X-COORDINATE Figure 28. Color bin structure for Warm White. 0.46 0.38 0.42 0.38 PM QM 2700K MM 0.34 Figure 27. Color bin structure for Cool White. 0.40 3500K 3050K 2850K 3250K 0.36 YA 0.28 0.26 0.26 XM 0.44 UN VM VN V0 WM WN W0 0.46 UM Y-COORDINATE 0.40 0.42 0.44 0.48 0.50 Color Bin Limit Cool White Color Limits (Chromaticity Coordinates) Warm White Color Limits (Chromaticity Coordinates) Bin UM X 0.365 0.367 0.348 0.347 Bin MM X 0.471 0.460 0.473 0.486 Y 0.385 0.400 0.385 0.372 Y 0.451 0.430 0.432 0.455 Bin UN X 0.365 0.362 0.346 0.347 Bin M1 X 0.460 0.453 0.467 0.473 Y 0.386 0.372 0.359 0.372 Y 0.430 0.416 0.419 0.432 Bin U0 X 0.362 0.360 0.344 0.346 Bin M0 X 0.453 0.444 0.459 0.467 Y 0.372 0.357 0.344 0.359 Y 0.416 0.399 0.403 0.419 Bin UP X 0.360 0.357 0.343 0.344 Bin MA X 0.459 0.444 0.436 0.451 Y 0.357 0.342 0.311 0.344 Y 0.403 0.399 0.384 0.389 Bin VM X 0.329 0.329 0.348 0.347 Bin NM X 0.454 0.444 0.460 0.471 Y 0.357 0.369 0.385 0.372 Y 0.446 0.426 0.430 0.451 Bin VN X 0.329 0.329 0.347 0.346 Bin N1 X 0.444 0.438 0.453 0.460 Y 0.345 0.357 0.372 0.359 Y 0.426 0.412 0.416 0.430 Bin V0 X 0.329 0.329 0.346 0.344 Bin N0 X 0.438 0.429 0.444 0.453 Y 0.331 0.345 0.359 0.344 Y 0.412 0.394 0.399 0.416 Bin VP X 0.329 0.344 0.343 0.329 Bin NA X 0.444 0.429 0.422 0.436 Y 0.331 0.344 0.331 0.320 Y 0.399 0.394 0.379 0.384 Bin WM X 0.329 0.329 0.315 0.314 Bin PM X 0.438 0.430 0.444 0.454 Y 0.369 0.357 0.344 0.355 Y 0.440 0.421 0.426 0.446 Bin WN X 0.329 0.316 0.315 0.329 Bin P1 X 0.430 0.424 0.438 0.444 Y 0.345 0.333 0.344 0.357 Y 0.421 0.407 0.412 0.426 Bin W0 X 0.329 0.329 0.317 0.316 Bin P0 X 0.424 0.416 0.429 0.438 Y 0.345 0.331 0.320 0.333 Y 0.407 0.389 0.394 0.412 Bin WP X 0.329 0.329 0.318 0.317 Bin PA X 0.429 0.416 0.410 0.422 Y 0.331 0.320 0.310 0.320 Y 0.394 0.389 0.374 0.379 Bin WQ X 0.329 0.329 0.319 0.318 Bin QM X 0.421 0.414 0.430 0.438 Y 0.320 0.310 0.300 0.310 Y 0.433 0.414 0.421 0.440 Bin XM X 0.301 0.314 0.315 0.303 Bin Q1 X 0.414 0.409 0.424 0.430 Y 0.342 0.355 0.344 0.333 Y 0.414 0.400 0.407 0.421 Bin XN X 0.305 0.303 0.315 0.316 Bin Q0 X 0.409 0.402 0.416 0.424 Y 0.322 0.333 0.344 0.333 Y 0.400 0.382 0.389 0.407 Bin X0 X 0.308 0.305 0.316 0.317 Bin QA X 0.416 0.402 0.396 0.410 Y 0.311 0.322 0.333 0.320 Y 0.389 0.382 0.367 0.374 Bin XP X 0.308 0.317 0.319 0.311 Tolerance: ± 0.01 Y 0.311 0.320 0.300 0.293 Bin Y0 X 0.308 0.283 0.274 0.303 Y 0.311 0.284 0.301 0.333 Bin YA X 0.308 0.311 0.290 0.283 Y 0.311 0.293 0.270 0.284 Tolerance: ± 0.01 12 Neutral White Color Limits (Chromaticity Coordinates) Dominant Wavelength (nm) at 350 mA Bin RM X 0.421 0.414 0.397 0.402 Y 0.433 0.414 0.406 0.423 Color Bin ID Min. Max. Bin R1 X 0.414 0.409 0.392 0.397 Y 0.414 0.400 0.391 0.406 Red – 620.0 635.0 Red Orange – 610.0 620.0 Amber B 587.0 589.5 C 589.5 592.0 D 592.0 594.5 E 594.5 597.0 A 455.0 460.0 B 460.0 465.0 C 465.0 470.0 D 470.0 475.0 C 490.0 495.0 Bin SA X 0.387 0.383 0.370 0.374 Y 0.374 0.360 0.351 0.366 D 495.0 500.0 E 500.0 505.0 Bin TM X 0.386 0.382 0.365 0.367 Y 0.413 0.397 0.386 0.400 F 505.0 510.0 Bin TN X 0.382 0.378 0.362 0.365 Y 0.397 0.382 0.372 0.386 G 510.0 515.0 H 515.0 520.0 A 515.0 520.0 B 520.0 525.0 C 525.0 530.0 D 530.0 535.0 Bin R0 X 0.392 0.387 0.402 0.409 Y 0.391 0.374 0.382 0.400 Bin RA X 0.387 0.383 0.396 0.402 Y 0.374 0.360 0.367 0.382 Bin SM X 0.402 0.397 0.382 0.386 Y 0.423 0.406 0.397 0.413 Blue Bin S1 X 0.397 0.392 0.378 0.382 Y 0.406 0.391 0.382 0.397 Bin S0 X 0.392 0.387 0.374 0.378 Y 0.391 0.374 0.366 0.382 Bin T0 X 0.378 0.374 0.360 0.362 Y 0.382 0.366 0.357 0.372 Cyan Green Bin TP X 0.374 0.370 0.357 0.360 Y 0.366 0.351 0.342 0.357 Tolerance: ± 0.01 Tolerance: ± 1 nm Peak Wavelength (nm) at 350 mA Packaging Option [x6] Selection Option 0 Tube 1 Tape and Reel Color Bin ID Min. Max. Royal Blue C 440.0 445.0 D 445.0 450.0 E 450.0 455.0 F 455.0 460.0 Tolerance: ±2 nm Example ASMT-AW00-NST00 ASMT-AW00-Nxxxx – Cool White, InGaN, Electrically isolated Heat Sink X3 = S – Minimum Flux Bin S X4 = T – Maximum Flux Bin T X5 = 0 – Full DIstribution X6 = 0 – Tube Option 13 Packing Tube – Option 0 0.4 ±0.1 7.3 ±0.1 8.4 ±0.1 3.4 ±0.1 5.0 ±0.1 17.2 ±0.1 mm 395 Figure 30. Package tube dimensions. 14 4.00 ±0.10 2.00 ±0.10 11.50 ±0.10 24.00 ±0.30 1.75 ±0.10 Tape and Reel – Option 1 A B Ø 1.50 +0.10 0.00 0.40 ±0.05 Ø 8.10 A +0.10 0.00 ‘BO’ 14.30 ±0.10 R 0.30 Max (TYP.) ‘KO’ 4.50 ±0.10 B 12.00 ±0.10 2.55 Section 'B-B' ‘AO’ 8.10 ±0.10 Section 'A-A' Figure 31. Carrier tape dimensions. Ø 330.0 ± 2.0 1.8 +0.2 0.0 24.0 +0.2 0.0 2.0 ±0.5 Ø 13.0 +0.5 –0.2 Detail – 1 See Detail – 1 Figure 32. Reel dimensions. 15 100 ±0.5 Ø 21.0 ±0.8 Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly of handling, the unit should be held on the body only. Please refer to Avago Application Note AN 5288 for detail information. Moisture Sensitivity This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use – Unopen moisture barrier bag (MBB) can be stored at