ASMT-AB31-NMP00

ASMT-Ax3x 3W Power LED Light Source Data Sheet Description Features This 3W Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. The exposed pad design enables excellent heat transfer from the package to the motherboard. Option with electrically isolated metal slug is also available. • Available in Red, Red Orange, Amber, Green, Blue, Royal Blue, Cool White, Neutral White and Warm White color The White Power LED is available in the range of color temperature from 2700K to 10000K. • High current operation The low profile package design is suitable for a wide variety of applications especially where height is a constraint. • Wide viewing angle at 140° The package is compatible with reflow soldering process. This part has a foot print that is compatible to most of the high power LED in the market today. • Energy efficient • Exposed metal slug for excellent heat transfer • Compatible with reflow soldering process • Long operation life • Silicone encapsulation • Non-ESD sensitive (threshold > 16 kV) • MSL 2a products Applications • Architectural lighting • Channel backlighting • Contour lighting • Retail Display lighting • Decorative lighting • Garden lighting • Safety, exit and emergency signs lighting • Specialty lighting • Task lighting Package Dimensions 7.4 1.1 Ø 6.0 7.4 1.5 2.3 Ø 8.0 Metal Slug BOTTOM VIEW TOP VIEW Anode Lead 0.5 4.1 (ref:) 3.0 Lens 2.0 Cathode Lead 6.0 13.8 ± 0.2 Metal Slug Body Figure 1. ASMT-Ax3x package outline drawing Notes: 1. All dimensions in millimeters. 2. Metal slug is connected to anode for electrically non-isolated option. 3. Tolerance is ±0.1 mm unless otherwise specified. 4 . Terminal Finish: Ag plating 2 Part Numbering System ASMT – A x1 3 x2 – x3 x4 x5 x6 x7 Packaging Option Color Bin Selection Maximum Flux Bin Selection Minimum Flux Bin Selection Dice Type N – InGaN A – AllnGaP Heat Sink 0 – Electrically Non-isolated 1 – Electrically Isolated Color R – Red H – Red Orange A – Amber G – Green B – Blue L – Royal Blue W – Cool White N – Neutral White Y – Warm White Note: 1. Please refer to Page 11 for selection details. Device Selection Guide (Tj = 25 °C) Luminous Flux (lm) / Radiometric Power (mW), ΦV [1,2] Part Number Color Min. Typ. Max. Test Current (mA) ASMT-AR30-AST00 Red 51.7 60.0 87.4 350 AllnGaP No [3] ASMT-AH30-ARS00 Red Orange 39.8 50.0 67.2 350 AllnGaP No [3] ASMT-AA30-ARS00 Amber 39.8 50.0 67.2 350 AllnGaP No [3] ASMT-AG31-NTU00 Green 67.2 78.0 99.6 350 InGaN Yes 87.4 105.0 113.6 350 InGaN Yes 13.9 18.0 30.6 350 InGaN Yes 18.1 23.0 30.6 350 InGaN Yes ASMT-AG31-NUV00 ASMT-AB31-NMP00 Blue ASMT-AB31-NNP00 Dice Technology Electrically Isolated Metal Slug ASMT-AL31-NRS00 Royal Blue 515 mW 600 mW 685 mW 350 InGaN Yes ASMT-AW31-NVX00 Cool White 99.6 120.0 147.7 350 InGaN Yes ASMT-AN31-NWX00 Neutral White 113.6 120.0 147.7 350 InGaN Yes ASMT-AY31-NUW00 Warm White 87.4 95.0 129.5 350 InGaN Yes Notes: 1. ΦV is the total luminous flux / radiometric power output as measured with an integrating sphere at 25ms mono pulse condition. 2. Flux and power tolerance is ±10 % 3. Electrically isolated metal slug option is also available. Please contact your Avago sale representative. 3 Absolute Maximum Ratings Parameter DC Forward Current AllnGaP [1] InGaN Units 700 700 mA Peak Pulsing Current 1500 2400 mA Power Dissipation 1820 2730 mW LED Junction Temperature 125 135 °C Operating Metal Slug Temperature Range at 350 mA -40 to +115 -40 to +120 °C Operating Metal Slug Temperature Range at 700 mA -40 to +100 -40 to +105 °C Storage Temperature Range -40 to +120 -40 to +120 °C Soldering Temperature Refer to Figure 26 Reverse Voltage [2] Not recommended Note: 1. Derate linearly based on Figure 10 for AlInGaP and Figure 22 for InGaN. 2. Not recommended for reverse bias operation. Optical Characteristics at 350 mA (TJ = 25 °C) Peak Wavelength, lPEAK (nm) Dominant Wavelength, lD [1] (nm) Viewing Angle, 2q½ [2] (°) Luminous Efficiency (lm/W) Part Number Color Typ. Typ. Typ. Typ. ASMT-AR30-AST00 Red 635 625 140 82 ASMT-AH30-ARS00 Red Orange 625 615 140 68 ASMT-AA30-ARS00 Amber 598 590 140 68 ASMT-AG31-NTU00 Green 519 525 140 70 519 525 140 94 454 460 140 16 454 460 140 21 450 455 140 Not applicable Correlated Color Temperature, CCT (Kelvin) Viewing Angle, 2q½ [2] (°) Luminous Efficiency (lm/W) ASMT-AG31-NUV00 ASMT-AB31-NMP00 Blue ASMT-AB31-NNP00 ASMT-AL31-NRS00 Royal Blue Part Number Color Min. Max. Typ. Typ. ASMT-AW31-NVX00 Cool White 4500 10000 140 107 ASMT-AN31-NWX00 Neutral White 3500 4500 140 107 ASMT-AY31-NUW00 Warm White 2700 3500 140 85 Notes: 1. The dominant wavelength, lD, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. q½ is the off-axis angle where the luminous intensity is ½ the peak intensity. 4 Electrical Characteristic at 350 mA (TJ = 25°C) Forward Voltage, VF (Volts) Thermal Resistance, Rθj-ms(°C/W) [1] Dice Type Min. Typ Max. Typ. AllnGaP 1.7 2.1 2.3 10 InGaN 2.8 3.2 3.5 10 Notes: 1. Rθj-ms is Thermal Resistance from LED junction to metal slug. Optical and Electrical Characteristic at 700 mA (TJ = 25°C) Luminous Flux (lm) / Radiometric Power (mW), ΦV Forward Voltage, VF (Volts) Part Number Color Typ. Typ. ASMT-AR30-AST00 Red 112.0 2.4 ASMT-AH30-ARS00 Red Orange 94.0 2.4 ASMT-AA30-ARS00 Amber 94.0 2.4 ASMT-AG31-NTU00 Green 125.0 3.6 168.0 3.6 30.0 3.6 39.0 3.6 ASMT-AG31-NUV00 ASMT-AB31-NMP00 Blue ASMT-AB31-NNP00 ASMT-AL31-NRS00 Royal Blue 1022 mW 3.6 ASMT-AW31-NVX00 Cool White 205.0 3.6 ASMT-AN31-NWX00 Neutral White 205.0 3.6 ASMT-AY31-NUW00 Warm White 162.0 3.6 5 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 AMBER RED ORANGE RED RELATIVE LUMINOUS FLUX (NORMALIZED AT 350 mA) RELATIVE INTENSITY AlInGaP 530 545 560 575 590 605 620 635 650 665 680 WAVELENGTH - nm 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 0 0.5 1 1.5 2 FORWARD VOLTAGE - V 2.5 3 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.00001 D= 0.05 0.10 0.25 0.50 1.00 D= 0.001 0.1 tp T tp IF T 10 tp - PULSE DURATION - sec Figure 6. Maximum pulse current vs.pulse duration. Derated based on TA = 25°C, RθJ-A = 30°C/W. 6 100 200 300 400 500 MONO PULSE CURRENT - mA 600 700 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 5. Radiation Pattern Red, Red Orange and Amber. IP - PULSE CURRENT - A IP - PULSE CURRENT - A Figure 4. Forward Current vs. Forward Voltage. 0 Figure 3. Relative Luminous Flux vs. Mono Pulse Current. NORMALIZED INTENSITY FORWARD CURRENT - mA Figure 2. Relative Intensity vs. Wavelength for Red, Red Orange and Amber. 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.00001 D= 0.05 0.10 0.25 0.50 1.00 D= 0.001 0.1 tp - PULSE DURATION - sec tp T tp IF T 10 Figure 7. Maximum pulse current vs. pulse duration. Derated based on TA = 85°C, RθJ-A = 30°C/W. AlInGaP RELATIVE LIGHT OUTPUT - % (NORMALIZED AT 25 °C) FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25°C) 0.05 120.0 110.0 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 0.0 25 RED-ORANGE RED AMBER 50 75 100 JUNCTION TEMPERATURE, TJ -°C 600 500 RθJ-A = 20°C/W RθJ-A = 25°C/W RθJ-A = 30°C/W 100 0 20 40 60 80 100 AMBIENT TEMPERATURE, TA - °C 50 75 100 JUNCTION TEMPERATURE, TJ -°C 125 Figure 9. Forward Voltage Shift vs. Junction Temperature. MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA 25 700 0 120 Figure 10. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 125°C, RθJ-A = 20°C/W, 25°C/W and 30°C/W. 7 -0.20 700 200 RED ORANGE -0.15 800 300 RED -0.10 800 400 AMBER -0.05 -0.25 125 Figure 8. Relative Light Output vs. Junction Temperature. 0.00 140 600 RθJ-MS = 10°C/W 500 400 300 200 100 0 0 20 40 60 80 100 METAL SLUG TEMPERATURE, TMS - °C 120 Figure 11. Maximum Forward Current vs. Metal Slug Temperature. Derated based on TJMAX = 125°C, RθJ-MS = 10°C/W. 140 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 WARM WHITE NEUTRAL WHITE COOL WHITE 380 480 580 WAVELENGTH - nm 680 RELATIVE INTENSITY RELATIVE INTENSITY InGaN 780 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 100 200 300 400 500 MONO PULSE CURRENT - mA 600 700 -90 -60 -30 0 30 ANGULAR DISPLACEMENT - DEGREES Figure 16. Radiation Pattern for Blue, Royal Blue and Green 8 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 FORWARD VOLTAGE - V 3 3.5 4 Figure 15. Forward Current vs. Forward Voltage. NORMALIZED INTENSITY NORMALIZED INTENSITY Figure 14. Relative Luminous Flux vs. Mono Pulse Current. 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Figure 13. Relative Intensity vs. Wavelength for Blue, Royal Blue and Green. FORWARD CURRENT - mA RELATIVE LUMINOUS FLUX / RADIOMETRIC POWER (NORMALIZED AT 350 mA) Figure 12. Relative Intensity vs. Wavelength for Warm White and Cool White. 1 0.9 GREEN 0.8 BLUE ROYAL BLUE 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 405 430 455 480 505 530 555 580 605 630 WAVELENGTH - nm 60 90 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 17. Radiation Pattern for Cool White, Neutral White and Warm White. 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.00001 t D= p T tp T IF Ip - PULSE CURRENT - A Ip - PULSE CURRENT - A InGaN D= 0.05 0.10 0.25 0.50 1.00 0.001 0.1 tp - PULSE DURATION - sec 10 120.0 110.0 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 0.0 25 75 100 125 JUNCTION TEMPERATURE, TJ - °C 700 700 MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA 800 600 500 RθJ-A = 20°C/W RθJ-A = 25°C/W RθJ-A = 30°C/W 200 100 0 0 20 40 60 80 100 AMBIENT TEMPERATURE, TA - °C 120 Figure 22. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 135°C, RθJ-A = 20°C/W, 25°C/W and 30°C/W. 9 T IF 0.001 0.1 tp - PULSE DURATION - sec 10 GREEN WHITE ROYAL BLUE BLUE 45 65 85 105 125 JUNCTION TEMPERATURE, TJ - °C 145 Figure 21. Forward Voltage Shift vs. Junction Temperature. 800 300 tp D= 0.05 0.10 0.25 0.50 1.00 0.05 0.00 -0.05 -0.10 -0.15 -0.20 -0.25 -0.30 -0.35 -0.40 -0.45 25 150 Figure 20. Relative Light Output vs. Junction Temperature. 400 tp T Figure 19. Maximum pulse current vs. pulse duration. Derated based on TA = 85°C, RθJ-A = 30°C/W. BLUE ROYAL BLUE GREEN WHITE 50 D= FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25 °C) RELATIVE LIGHT OUTPUT - % (NORMALIZED AT 25 °C) Figure 18. Maximum pulse current vs. pulse duration. Derated based on TA = 25°C, RθJ-A = 30°C/W. 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.00001 140 600 RθJ-MS = 10°C/W 500 400 300 200 100 0 0 20 40 60 80 100 METAL SLUG TEMPERATURE, TMS - °C 120 Figure 23. Maximum Forward Current vs. Metal Slug Temperature. Derated based on TJMAX = 135°C, RθJ-MS = 10°C/W. 140 1.60 4.38 8.80 14.10 2.65 Ø 6.40 ∅5.8 1.10 Figure 24. Recommended soldering land pattern. Figure 25. Recommended pick and place nozzle tip. Inner diameter = 5.8 mm TEMPERATURE 10 to 30 SEC. 217°C 200°C 255 - 260°C 3°C/SEC. MAX. 6°C/SEC. MAX. 150°C 3°C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Figure 26. Recommended Reflow Soldering. Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN1060 Surface Mounting SMT LED Indicator Components. 10 Option Selection Details Flux / Power Bin Limit [x4, x5] Color Bin ID Luminous Flux (lm) / Radiometric Power (mW) at 350 mA Min. Max. Blue M N P R S T U V W X P Q R S 13.9 18.1 23.5 39.8 51.7 67.2 87.4 99.6 113.6 129.5 355.0 435.0 515.0 595.0 ASMT-A x13 x2 – x3 x4 x5 x6 x7 x4 – Minimum Flux Bin Selection x5 – Maximum Flux Bin Selection x6 – Color Bin Selection x7 – Packaging Option Other Colors Royal Blue Tolerance for each bin limits is ±10 % Color Bin Selection [x6] Individual reel or tube will contain parts from one color bin selection only. Cool White Warm White Selection Bin ID Selection Bin ID 0 Full Distribution 0 Full Distribution B VN and V0 A M0 and MA E VM, UM, VN and UN B PA and P0 F WM, VM, WN and VN C N1 and N0 G XM, WM, XN and WN E NM, MM, N1 and M1 H UN, VN, U0 and V0 F PM, NM, P1 and N1 J WN, VN, W0 and V0 G QM, PM, Q1 and P1 K XN, WN, X0 and W0 H M1, N1, M0 and N0 L V0, U0, VP and UP J P1, N1, P0 and N0 M W0, V0, WP, VP and WQ K Q1, P1, Q0 and P0 N X0, W0, XP, WP and WQ L N0, M0, NA and MA P Y0 M P0, N0, PA and NA Q YA N Q0, P0, QA and PA Neutral White Other Colors Selection Bin ID Selection Bin ID 0 Full Distribution 0 Full Distribution A S1 and S0 Z A and B B S0 and R0 Y B and C E SM, RM, S1 and R1 W C and D F TM, SM, TN and S1 V D and E G S1, R1, S0 and R0 Q A, B and C H TN, S1, T0 and S0 P B, C and D J S0, R0, SA and RA N C, D and E T0, S0, TP and SA M D, E and F K 11 18.1 23.5 30.6 51.7 67.2 87.4 99.6 113.6 129.5 147.7 435.0 515.0 595.0 685.0 0.42 0.48 4500K 5000K Y-COORDINATE 0.38 5650K 6300K 0.36 7000K 0.34 0.32 XN X0 10000K Y0 0.30 XP U0 UP VP WP WQ BLACK BODY CURVE 0.28 0.30 0.32 0.34 X-COORDINATE 0.36 0.38 0.40 0.44 4100K Y-COORDINATE 0.42 4500K 3800K S1 TN SA R1 R0 S0 T0 3500K RM SM TM 0.36 RA BLACK BODY CURVE TP 0.34 0.32 0.34 0.36 0.38 0.40 X-COORDINATE Figure 29. Color bin structure for Neutral White. 12 0.40 Q0 P0 PA NA NM M1 N1 P1 Q1 M0 N0 MA QA BLACK BODY CURVE 0.32 0.38 0.40 0.42 0.44 0.46 X-COORDINATE Figure 28. Color bin structure for Warm White. 0.46 0.38 0.42 0.38 PM QM 2700K MM 0.34 Figure 27. Color bin structure for Cool White. 0.40 3500K 3050K 2850K 3250K 0.36 YA 0.28 0.26 0.26 XM 0.44 UN VM VN V0 WM WN W0 0.46 UM Y-COORDINATE 0.40 0.42 0.44 0.48 0.50 Color Bin Limit Cool White Color Limits (Chromaticity Coordinates) Warm White Color Limits (Chromaticity Coordinates) Bin UM x 0.365 0.367 0.348 0.347 Bin MM x 0.471 0.460 0.473 0.486 y 0.386 0.400 0.385 0.372 y 0.451 0.430 0.432 0.455 Bin UN x 0.365 0.362 0.346 0.347 Bin M1 x 0.460 0.453 0.467 0.473 y 0.386 0.372 0.359 0.372 y 0.430 0.416 0.419 0.432 Bin U0 x 0.362 0.360 0.344 0.346 Bin M0 x 0.453 0.444 0.459 0.467 y 0.372 0.357 0.344 0.359 y 0.416 0.399 0.403 0.419 Bin UP x 0.360 0.357 0.343 0.344 Bin MA x 0.459 0.444 0.436 0.451 y 0.357 0.342 0.311 0.344 y 0.403 0.399 0.384 0.389 Bin VM x 0.329 0.329 0.348 0.347 Bin NM x 0.454 0.444 0.460 0.4 71 y 0.357 0.369 0.385 0.372 y 0.446 0.426 0.430 0.451 Bin VN x 0.329 0.329 0.347 0.346 Bin N1 x 0.444 0.438 0.453 0.4 60 y 0.345 0.357 0.372 0.359 y 0.426 0.412 0.416 0.430 Bin V0 x 0.329 0.329 0.346 0.344 Bin N0 x 0.438 0.429 0.444 0.4 53 y 0.311 0.345 0.359 0.344 y 0.412 0.394 0.399 0.416 Bin VP x 0.329 0.344 0.343 0.329 Bin NA x 0.444 0.429 0.422 0.4 36 y 0.331 0.344 0.331 0.320 y 0.399 0.394 0.379 0.384 Bin WM x 0.329 0.329 0.315 0.314 Bin PM x 0.438 0.430 0.444 0.454 y 0.369 0.357 0.344 0.355 y 0.440 0.421 0.426 0.446 Bin WN x 0.329 0.316 0.315 0.329 Bin P1 x 0.430 0.424 0.438 0.444 y 0.345 0.333 0.344 0.357 y 0.421 0.407 0.412 0.426 Bin W0 x 0.329 0.329 0.317 0.316 Bin P0 x 0.424 0.416 0.429 0.438 y 0.345 0.331 0.320 0.333 y 0.407 0.389 0.394 0.412 Bin WP x 0.329 0.329 0.318 0.317 Bin PA x 0.429 0.416 0.410 0.422 y 0.331 0.320 0.310 0.320 y 0.394 0.389 0.374 0.379 Bin WQ x 0.329 0.329 0.319 0.318 Bin QM x 0.421 0.414 0.430 0.438 y 0.320 0.310 0.300 0.310 y 0.433 0.414 0.421 0.440 Bin XM x 0.301 0.314 0.315 0.303 Bin Q1 x 0.414 0.409 0.424 0.430 y 0.342 0.355 0.344 0.333 y 0.414 0.400 0.407 0.421 Bin XN x 0.305 0.303 0.315 0.316 Bin Q0 x 0.409 0.402 0.416 0.424 y 0.322 0.333 0.344 0.333 y 0.400 0.382 0.389 0.407 Bin X0 x 0.308 0.305 0.316 0.317 Bin QA x 0.416 0.402 0.396 0.410 y 0.311 0.322 0.333 0.320 y 0.389 0.382 0.367 0.374 Bin XP x 0.308 0.317 0.319 0.311 Tolerance: ± 0.01 y 0.311 0.320 0.300 0.293 Bin Y0 x 0.308 0.283 0.274 0.303 y 0.311 0.284 0.301 0.333 Bin YA x 0.308 0.311 0.290 0.283 y 0.311 0.293 0.270 0.284 Tolerance: ± 0.01 13 Neutral White Color Limits (Chromaticity Coordinates) Dominant Wavelength (nm) at 350 mA Bin RM x 0.421 0.414 0.397 0.402 y 0.433 0.414 0.406 0.423 Color Bin ID Min. Max. Bin R1 x 0.414 0.409 0.392 0.397 y 0.414 0.400 0.391 0.406 Red – 620.0 635.0 Red Orange – 610.0 620.0 Amber B 587.0 589.5 C 589.5 592.0 D 592.0 594.5 E 594.5 597.0 A 515.0 520.0 B 520.0 525.0 C 525.0 530.0 D 530.0 535.0 A 455.0 460.0 B 460.0 465.0 C 465.0 470.0 D 470.0 475.0 Bin R0 x 0.392 0.387 0.402 0.409 y 0.391 0.374 0.382 0.400 Bin RA x 0.387 0.383 0.396 0.402 y 0.374 0.360 0.367 0.382 Bin SM x 0.402 0.397 0.382 0.386 y 0.423 0.406 0.397 0.413 Green Bin S1 x 0.397 0.392 0.378 0.382 y 0.406 0.391 0.382 0.397 Bin S0 x 0.392 0.387 0.374 0.378 y 0.391 0.374 0.366 0.382 Blue Bin SA x 0.387 0.383 0.370 0.374 y 0.374 0.360 0.351 0.366 Bin TM x 0.386 0.382 0.365 0.367 y 0.413 0.397 0.386 0.400 Bin TN x 0.382 0.378 0.362 0.365 y 0.397 0.382 0.372 0.386 Bin T0 x 0.378 0.374 0.360 0.362 y 0.382 0.366 0.357 0.372 Bin TP x 0.374 0.370 0.357 0.360 y 0.366 0.351 0.342 0.357 Tolerance: ±1 nm Peak Wavelength (nm) at 350 mA Color Bin ID Min. Max. Royal Blue C 440.0 445.0 D 445.0 450.0 E 450.0 455.0 F 455.0 460.0 Tolerance: ± 0.01 Tolerance: ±2 nm Packaging Option [x7] Example Selection Option 0 Tube 1 Tape and Reel 14 ASMT-AW31-NUV00 ASMT-AW31-Nxxxx – Cool White, InGaN, Electrically isolated Heat Sink x4 = U – Minimum Flux Bin U x5 = V – Maximum Flux Bin V x6 = 0 – Full Distribution x7 = 0 – Tube Option Packing Tube – Option 0 0.4 ±0.1 7.3 ±0.1 8.4 ±0.1 3.4 ±0.1 5.0 ±0.1 17.2 ±0.1 mm 395 Figure 30. Package tube dimensions. 15 4.00 ±0.10 2.00 ±0.10 11.50 ±0.10 24.00 ±0.30 1.75 ±0.10 Tape and Reel – Option 1 A B Ø 1.50 +0.10 0.00 0.40 ±0.05 Ø 8.10 A +0.10 0.00 ‘BO’ 14.30 ±0.10 R 0.30 Max (TYP.) ‘KO’ 4.50 ±0.10 B 12.00 ±0.10 2.55 Section 'B-B' ‘AO’ 8.10 ±0.10 Section 'A-A' Figure 31. Carrier tape dimensions. Ø 330.0 ± 2.0 1.8 +0.2 0.0 24.0 +0.2 0.0 2.0 ±0.5 Ø 13.0 +0.5 –0.2 Detail – 1 See Detail – 1 Figure 32. Reel dimensions. 16 100 ±0.5 Ø 21.0 ±0.8 Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly of handling, the unit should be held on the body only. Please refer to Avago Application Note AN 5288 for detail information. Moisture Sensitivity This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use – Unopen moisture barrier bag (MBB) can be stored at < 40°C/90%RH for 12 months. If the actual shelf life has exceeded 12 months and the humidity indicator card (HIC) indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. – It is not recommended to open the MBB prior to assembly (e.g. for IQC). B. Control after opening the MBB – The humidity indicator card (HIC) shall be read immediately upon opening of MBB. – The LEDs must be kept at < 30°C/60%RH at all time and all high temperature related process including soldering, curing or rework need to be completed within 672 hours. C. Control for unfinished reel – For any unused LEDs, they need to be stored in sealed MBB with desiccant or desiccator at < 5%RH. D. Control of assembled boards – If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be stored in sealed MBB with desiccant or desiccator at < 5%RH to ensure no LEDs have exceeded their floor life of 672 hours. E. Baking is required if: – HIC “10%” indicator is NOT Brown and “5%” indicator is Azure. – The LEDs are exposed to condition of > 30°C/60%RH at any time. – The LED floor life exceeded 672 hrs. Recommended baking condition: 60±5°C for 20 hrs. DISCLAIMER: Avago’s products and software are not specifically designed, manufactured or authorized for sale as parts, components or assemblies for the planning, construction, maintenenace or direct operation of a nuclear facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to make claims against avago or its suppliers, fo all loss, damage, expense or liability in connection with such use. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2015 Avago Technologies. All rights reserved. AV02-2048EN - February 2, 2015