ASMT-JN32-NVVG1

ASMT-Jx32 3W Mini Power LED Light Source Data Sheet Description Features The 3W Mini Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. The metal slug is electrically isolated. • Available in Cool White, Neutral White and Warm White The White Mini Power LED is available in the range of color temperature from 2700K to 10000K. • Small footprint and low profile • Symmetrical outline • Energy efficient • Direct heat transfer from metal slug to mother board The low profile package design and ultra small footprint is suitable for a wide variety of applications especially where space and height is a constraint. • Compatible with reflow soldering process The package is compatible with reflow soldering process. To facilitate easy pick & place assembly, the LEDs are packed in EIA-compliant tape and reel. • Wide viewing angle • High current operation • Long operation life • Silicone encapsulation • Non-ESD sensitive (threshold > 16kV) • MSL 1 products Applications • Sign backlight • Safety, exit and emergency sign lightings • Specialty lighting such as task lighting and reading lights • Retail display • Commercial lighting • Accent or marker lightings, strip or step lightings • Portable lightings, bicycle head lamp, torch lights • Decorative lighting • Architectural lighting • Pathway lighting • Street lighting • Pedestrian street lighting • Tunnel lighting CAUTION: Customer is advised to keep the LEDs in the MBB when not in use as prolonged exposure to environment might cause the silver plated leads to tarnish, which might cause difficulties in soldering. Package Dimensions 5.0 4.0 .7 4.0 0.7 1.0 0.8 Ø3 Lens Cathode Mark 0.3 1.85 Anode Lead NC NC NC Body Metal Slug NC Cathode Lead 0.65 0.60 Ø 1.70 Figure 1. ASMT-Jx32 package outline drawing 2 Notes: 1. All dimensions in millimeters. 2. Tolerance is ±0.1 mm unless otherwise specified. 3. Terminal finish: Ag plating. 4. Corresponding NC (No Connection) leads adjacent to anode and cathode leads can be electrically short. Part Numbering System ASMT- J x1 3 2 – x2 x3 x4 x5 x6 Packaging Option Color Bin Selection Maximum Flux Bin Selection Minimum Flux Bin Selection Dice Type N – InGaN Color Note: 1. Please refer to Page 8 for selection details. W – Cool White N – Neutral White Y – Warm White Device Selection Guide (TJ = 25°C)   Part Number   Color ASMT-JW32-NUV01 Cool White Luminous Flux (Im), ΦV[1,2] Min. Typ. Max. Test Current (mA) Dice Technology Electrically Isolated Metal Slug 87.4 100.0 113.6 350 InGaN Yes ASMT-JW32-NVV01 99.6 105.0 113.6 350 InGaN Yes ASMT-JW32-NVW01 99.6 110.0 129.5 350 InGaN Yes ASMT-JW32-NWX01 113.6 125.0 147.7 350 InGaN Yes ASMT-JN32-NUV01 87.4 100.0 113.6 350 InGaN Yes ASMT-JN32-NVV01 99.6 105.0 113.6 350 InGaN Yes ASMT-JN32-NVW01 99.6 110.0 129.5 350 InGaN Yes ASMT-JN32-NWX01 113.6 125.0 147.7 350 InGaN Yes 67.2 90.0 113.6 350 InGaN Yes 87.4 105.0 129.5 350 InGaN Yes ASMT-JY32-NTV01 Neutral White Warm White ASMT-JY32-NUW01 Notes: 1. ΦV is the total luminous flux output as measured with an integrating sphere at 25ms mono pulse condition. 2. Flux tolerance is ±10% Absolute Maximum Ratings Parameter ASMT-Jx32 Units DC Forward Current [1] 700 mA Peak Pulsing Current 2400 mA Power Dissipation 2730 mW LED Junction Temperature 135 °C Operating Metal Slug Temperature Range at 350 mA -40 to +120 °C Operating Metal Slug Temperature Range at 700 mA -40 to +105 °C Storage Temperature Range -40 to + 120 °C Soldering Temperature Refer to Figure 15 Reverse Voltage [2] Not recommended Notes: 1. Derate linearly based on Figure 11. 2. Not designed for reverse bias operation. 3 Optical Characteristics at 350 mA (TJ = 25°C) Correlated Color Temperature, CCT (Kelvin) Viewing Angle, 2θ½ [1] (°) Luminous Efficiency (lm/W) Part Number Color Min. Max. Typ. Typ. ASMT-JW32-NUV01 Cool White 4500 10000 140 89 ASMT-JW32-NVV01 4500 10000 140 94 ASMT-JW32-NVW01 4500 10000 140 98 ASMT-JW32-NWX01 4500 10000 140 112 ASMT-JN32-NUV01 3500 4500 140 89 ASMT-JN32-NVV01 3500 4500 140 94 ASMT-JN32-NVW01 3500 4500 140 98 ASMT-JN32-NWX01 3500 4500 140 112 2700 3500 140 80 2700 3500 140 94 ASMT-JY32-NTV01 Neutral White Warm White ASMT-JY32-NUW01 Note: 1. θ½ is the off-axis angle where the luminous intensity is ½ the peak intensity. Electrical Characteristic at 350 mA (TJ = 25°C) Forward Voltage, VF (Volts) Thermal Resistance, RθJ-MS(°C/W) [1] Dice Type Min. Typ Max. Typ. InGaN 2.8 3.2 3.5 9 Note: 1. RθJ-MS is Thermal Resistance from LED junction to metal slug. Optical and Electrical Characteristic at 700 mA (TJ = 25°C) Luminous Flux (lm), φV Forward Voltage, VF (Volts) Part Number Color Typ. Typ. ASMT-JW32-NUV01 Cool White 175.0 3.6 ASMT-JW32-NVV01 180.0 3.6 ASMT-JW32-NVW01 187.0 3.6 ASMT-JW32-NWX01 213.0 3.6 ASMT-JN32-NUV01 175.0 3.6 ASMT-JN32-NVV01 180.0 3.6 ASMT-JN32-NVW01 187.0 3.6 ASMT-JN32-NWX01 213.0 3.6 153.0 3.6 179 3.6 ASMT-JY32-NTV01 ASMT-JY32-NUW01 4 Neutral White Warm White WARM WHITE COOL WHITE 430 480 530 580 630 WAVELENGTH - nm 680 RELATIVE INTENSITY RELATIVE INTENSITY 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 730 780 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 100 200 300 400 500 MONO PULSE CURRENT - mA 600 700 3.00 2.80 2.60 2.40 2.20 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 0.00001 0.0001 D= IF T D= 0.05 0.10 0.25 0.50 1.00 0.001 0.01 0.1 tp - PULSE DURATION - sec Figure 6. Maximum pulse current vs. pulse duration Derated based on TA = 25°C, RθJ-A = 30°C/W. 5 tp tp T 1 480 530 580 630 WAVELENGTH - nm 680 730 780 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 FORWARD VOLTAGE - V 3 3.5 4 Figure 5. Forward Current vs. Forward Voltage IP - PULSE CURRENT - A IP - PULSE CURRENT - A Figure 4. Relative Luminous Flux vs. Mono Pulse Current 430 Figure 3. Relative Intensity vs. Wavelength for Neutral White FORWARD CURRENT - mA RELATIVE LUMINOUS FLUX (NORMALIZED AT 350 mA) Figure 2. Relative Intensity vs. Wavelength for Cool White and Warm White 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 10 100 3.00 2.80 2.60 2.40 2.20 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 0.00001 0.0001 D= tp T tp IF T D= 0.05 0.10 0.25 0.50 1 0.001 0.01 0.1 tp - PULSE DURATION - sec Figure 7. Maximum pulse current vs. pulse duration Derated based on TA = 85°C, RθJ-A = 30°C/W. 1 10 100 NORMALIZED INTENSITY 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 ANGULAR DISPLACEMENT - DEGREES 60 90 RELATIVE LIGHT OUTPUT (%) (NORMALIZED AT 25°C) 120.0 110.0 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 0.0 -50 FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25°C) Figure 8. Radiation Pattern for Cool White, Warm White and Neutral White -25 0 25 50 75 100 JUNCTION TEMPERATURE, TJ - °C 125 150 Figure 9. Relative Light Output vs. Junction Temperature MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA -25 0 25 50 75 100 JUNCTION TEMPERATURE, TJ - °C 125 150 800 700 600 500 400 RθJ-A = 20°C/W RθJ-A = 25°C/W RθJ-A = 30°C/W 300 200 100 0 20 40 60 80 100 AMBIENT TEMPERATURE, TA - °C 120 140 Figure 11. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 135°C, RθJ-A = 20°C/W, 25°C/W and 30°C/W 6 -50 Figure 10. Forward Voltage Shift vs. Junction Temperature 800 0 0.30 0.25 0.20 0.15 0.10 0.05 0.00 -0.05 -0.10 -0.15 -0.20 -0.25 -0.30 -0.35 700 600 500 400 RθJ-MS = 9°C/W 300 200 100 0 0 20 40 60 80 100 METAL SLUG TEMPERATURE, TMS - °C 120 140 Figure 12. Maximum Forward Current vs. Metal Slug Temperature. Derated based on TJMAX = 135°C, RθJ-MS = 9°C/W 0.80 0.85 Solder Pad 1.75 3.50 Slug Indepdent 5.20 ø1.90 ø3.2 1.32 Solder Pad Figure 13. Recommended soldering land pattern Figure 14. Recommended pick and place nozzle tip. Inner diameter = 3.2 mm TEMPERATURE 10 - 30 SEC. 217°C 200°C 255 - 260°C 3°C/SEC. MAX. 6°C/SEC. MAX. 150°C 3°C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Figure 15. Recommended Reflow Soldering Profile Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN1060 Surface Mounting SMT LED Indicator Components. 7 Option Selection Details Flux Bin Limit [x3, x4] ASMT-J x1 3 2 – x2 x3 x4 x5 x6 x3 – Minimum Flux Bin Selection x4 – Maximum Flux Bin Selection x5 – Color Bin Selection x6 – Packaging Option Luminous Flux (lm) at 350 mA Bin ID Min. Max. T 67.2 87.4 U 87.4 99.6 V 99.6 113.6 W 113.6 129.5 X 129.5 147.7 Color Bin Selection [x5] Individual reel will contain parts from one color bin selection only. Cool White Warm White Selection Bin ID Selection Bin ID 0 Full Distribution 0 Full Distribution E VM, UM, VN and UN E NM, MM, N1 and M1 F WM, VM, WN and VN F PM, NM, P1 and N1 G XM, WM, XN and WN G QM, PM, Q1 and P1 H UN, VN, U0 and V0 H M1, N1, M0 and N0 J WN, VN, W0 and V0 J P1, N1, P0 and N0 K XN, WN, X0 and W0 K Q1, P1, Q0 and P0 L V0, U0, VP and UP L N0, M0, NA and MA M W0, V0, WP, VP and WQ M P0, N0, PA and NA N X0, W0, XP, WP and WQ N Q0, P0, QA and PA P Y0 Q YA Neutral White Selection Bin ID 0 Full Distribution E SM, RM, S1 and R1 F TM, SM, TN and S1 G S1, R1, S0 and R0 H TN, S1, T0 and S0 J S0, R0, SA and RA K T0, S0, TP and SA 8 0.48 0.42 4500K 0.40 5650K 6300K 0.36 WM XM WN W0 XN X0 WP 7000K 0.34 10000K UP VP BLACK BODY CURVE 0.28 0.30 0.32 0.34 X-COORDINATE 0.36 0.38 0.40 0.44 Y-COORDINATE 0.42 4100K 4500K TM S1 S0 SA TP 3800K RA 3500K RM SM TN T0 0.36 R1 R0 BLACK BODY CURVE 0.34 0.32 0.34 0.36 0.38 0.40 X-COORDINATE Figure 18. Color bin structure for Neutral White 9 0.40 0.38 QA PA NM P1 P0 N0 NA M1 N1 M0 MA BLACK BODY CURVE 0.32 0.38 0.40 0.42 0.44 0.46 X-COORDINATE Figure 17. Color bin structure for Warm White 0.46 0.38 Q1 Q0 2700K MM PM QM 0.42 3050K 2850K 0.34 Figure 16. Color bin Structure for Cool White 0.40 3500K 3250K 0.36 YA 0.28 0.26 0.26 0.44 UN U0 VM VN V0 XP WQ Y0 0.30 UM Y-COORDINATE Y-COORDINATE 0.38 0.32 0.46 5000K 0.42 0.44 0.48 0.50 Color Bin Limits Warm White Color Limits (Chromaticity Coordinates) 0.347 0.372 Bin MM x y 0.471 0.451 0.460 0.430 0.473 0.432 0.486 0.455 0.346 0.359 0.347 0.372 Bin M1 x y 0.460 0.430 0.453 0.416 0.467 0.419 0.473 0.432 0.360 0.357 0.344 0.344 0.346 0.359 Bin M0 x y 0.453 0.416 0.444 0.399 0.459 0.403 0.467 0.419 0.360 0.357 0.357 0.342 0.343 0.331 0.344 0.344 Bin MA x y 0.459 0.403 0.444 0.399 0.436 0.384 0.451 0.389 x y 0.329 0.357 0.329 0.369 0.348 0.385 0.347 0.372 Bin NM x y 0.454 0.446 0.444 0.426 0.460 0.430 0.471 0.451 Bin VN x y 0.329 0.345 0.329 0.357 0.347 0.372 0.346 0.359 Bin N1 x y 0.444 0.426 0.438 0.412 0.453 0.416 0.460 0.430 Bin V0 x y 0.329 0.331 0.329 0.345 0.346 0.359 0.344 0.344 Bin N0 x y 0.438 0.412 0.429 0.394 0.444 0.399 0.453 0.416 Bin VP x y 0.329 0.331 0.344 0.344 0.343 0.331 0.329 0.320 Bin NA x y 0.444 0.399 0.429 0.394 0.422 0.379 0.436 0.384 Bin WM x y 0.329 0.369 0.329 0.357 0.315 0.344 0.314 0.355 Bin PM x y 0.438 0.440 0.430 0.421 0.444 0.426 0.454 0.446 Bin WN x y 0.329 0.345 0.316 0.333 0.315 0.344 0.329 0.357 Bin P1 x y 0.430 0.421 0.424 0.407 0.438 0.412 0.444 0.426 Bin W0 x y 0.329 0.345 0.329 0.331 0.317 0.320 0.316 0.333 Bin P0 x y 0.424 0.407 0.416 0.389 0.429 0.394 0.438 0.412 Bin WP x y 0.329 0.331 0.329 0.320 0.318 0.310 0.317 0.320 Bin PA x y 0.429 0.394 0.416 0.389 0.410 0.374 0.422 0.379 Bin WQ x y 0.329 0.320 0.329 0.310 0.319 0.300 0.318 0.310 Bin QM x y 0.421 0.433 0.414 0.414 0.430 0.421 0.438 0.440 Bin XM x y 0.301 0.342 0.314 0.355 0.315 0.344 0.303 0.333 Bin Q1 x y 0.414 0.414 0.409 0.400 0.424 0.407 0.430 0.421 Bin XN x y 0.305 0.322 0.303 0.333 0.315 0.344 0.316 0.333 Bin Q0 x y 0.409 0.400 0.402 0.382 0.416 0.389 0.424 0.407 Bin X0 x y 0.308 0.311 0.305 0.322 0.316 0.333 0.317 0.320 Bin QA x y 0.416 0.389 0.402 0.382 0.396 0.367 0.410 0.374 Bin XP x y 0.308 0.311 0.317 0.320 0.319 0.300 0.311 0.293 Bin YO x y 0.308 0.311 0.283 0.284 0.274 0.301 0.303 0.333 Bin YA x y 0.308 0.311 0.311 0.293 0.290 0.270 0.283 0.284 Cool White Color Limits (Chromaticity Coordinates) Bin UM x y 0.365 0.386 0.367 0.400 0.348 0.385 Bin UN x y 0.365 0.386 0.362 0.372 Bin U0 x y 0.362 0.372 Bin UP x y Bin VM Tolerance: ±0.01 10 Tolerance: ±0.01 Packaging Option [x6] Neutral White Color Limits (Chromaticity Coordinates) Bin RM x y 0.421 0.433 0.414 0.414 0.397 0.406 0.402 0.423 Bin R1 x y 0.414 0.414 0.409 0.400 0.392 0.391 0.397 0.406 Bin R0 x y 0.392 0.391 0.387 0.374 0.402 0.382 0.409 0.400 Example Bin RA x y 0.387 0.374 0.383 0.360 0.396 0.367 0.402 0.382 ASMT-JW32-NUV01 Bin SM x y 0.402 0.423 0.397 0.406 0.382 0.397 0.386 0.413 Bin S1 x y 0.397 0.406 0.392 0.391 0.378 0.382 0.382 0.397 Bin S0 x y 0.392 0.391 0.387 0.374 0.374 0.366 0.378 0.382 Bin SA x y 0.387 0.374 0.383 0.360 0.370 0.351 0.374 0.366 Bin TM x y 0.386 0.413 0.382 0.397 0.365 0.386 0.367 0.400 Bin TN x y 0.382 0.397 0.378 0.382 0.362 0.372 0.365 0.386 Bin T0 x y 0.378 0.382 0.374 0.366 0.360 0.357 0.362 0.372 Bin TP x y 0.374 0.366 0.370 0.351 0.357 0.342 0.360 0.357 Tolerance: ±0.01 11 Selection Option 1 Tape and Reel ASMT-JW32-Nxxxx – Cool White, InGaN, Electrically isolated Heat Sink X3 = U – Minimum Flux Bin U X4 = V – Maximum Flux Bin V X5 = 0 – Full Distribution X6 = 1 – Tape and Reel Option Tape and Reel – Option 1 ø1.5 ±0.1 4.00 ±.10 0.25 ±0.02 2.00 ±.05 8.00 ±.10 ø1.5 ±0.25 8° 2.01 ±0.1 0.25 ±0.02 2.05 ±.10 4.15 ±.10 5.25 ±.10 12.00 +.30 .10 5.50 ±.05 5° 1.75 ±0.01 Figure 19. Carrier Tape Dimensions 13.2 ±.5 16.0 ±.5 3 ±0.5 ø21.0 ±0.5 ø13.1 ±0.5 ø10 178 ±1 ø60 ±0.5 4 ±0.5 5 ±0.5 Notes: 1. Empty component pockets sealed with top cover tape. 2. 250 or 500 pieces per reel. 3. Drawing not to scale. 4. All dimensions are in millimeters. Figure 20. Reel dimensions 12 USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 21. Reeling Orientation DISCLAIMER: Avago’s products and software are not specifically designed, manufactured or authorized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-2428EN - August 25, 2011