ASMT-MW62-NFH00

ASMT-Mx6x MoonstoneTM ½W Power LED Light Source Data Sheet Description Features ½W Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. The exposed pad design has excellent heat transfer from the package to the motherboard. • Available in Cool White and Warm White color The Cool White Power LED is available in various color temperature ranging from 4000K to 10000K and Warm White Power LED ranging from 2600K to 4000K. • Energy efficient • Exposed pad for excellent heat transfer • Suitable for reflow soldering process • High current operation • Long operation life The low profile package design is suitable for a wide variety of applications especially where height is a constraint. • Wide viewing angle The package is compatible with reflow soldering. This will give more freedom and flexibility to the light source designer. • ESD HBM Class 3B, > 8000 Applications • Sign backlight • Safety, exit and emergency sign lightings • Specialty lighting such as task lighting and reading lights • Retail display • Commercial lighting • Accent or marker lightings, strip or step lightings • Silicone encapsulation • MSL 4 products • High junction temperature of 145°C Specifications • InGaN Technology • 3.3V, 150mA (typical) • 110 viewing angle Package Dimensions 10.00 1 Anode 2 Cathode 3 Heat Sink 3.30 8.50 1.27 Metal Slug 3 Ø 5.26 10.60 LED + − 8.50 ZENER Ø 8.00 2.00 5.25 1.30 2 1 5.08 0.81 Notes: 1. All dimensions are in millimeters. 2. Unless otherwise stated, the tolerance for dimension is ±0.1mm. Device Selection Guide (Tj = 25°C) Luminous Flux, ΦV [1,2] (lm) Dice Technology Electrically Isolated Metal Slug Part Number Color Min. Typ. Max. Test Current (mA) ASMT-MW62-NGJ00 Cool White 25.5 41.0 56.0 150 InGaN Yes 33.0 49.0 73.0 150 InGaN Yes 25.5 38.0 56.0 150 InGaN Yes ASMT-MW62-NHK00 ASMT-MY62-NGJ00 Warm White Notes: 1. ΦV is the total luminous flux output as measured with an integrating sphere at 25ms mono pulse condition. 2. Flux tolerance is ±10 % 2 Part Numbering System ASMT – M x x x – N x1 x2 x3 x4 Packaging Option 0 – Tube 1 – Tape and Reel Color Bin Selection Maximum Flux Bin Minimum Flux Bin Heat Sink 2 – Electrically Isolated Silicone Type 6 – Non-diffused Color W – Cool White Y – Warm White Absolute Maximum Ratings at TA = 25°C Parameter ASMT-Mx6x / ASMT-MxHx Units DC Forward Current [1] 150 mA Peak Pulsing Current [2] 300 mA Power Dissipation 555 mW LED Junction Temperature 145 °C Operating Ambient Temperature Range -40 to +120 °C Storage Temperature Range -40 to +120 °C Notes: 1. DC forward current – derate linearly based on Figure 7. 2. Pulse condition duty factor = 10%, Frequency = 1kHz Optical Characteristics (TA = 25°C) Correlated Color Temperature, CCT (Kelvin) Viewing Angle 2θ½ [1] (Degrees) Luminous Efficiency (lm/W) Part Number Color Min Max Typ Typ ASMT-MW62-NGJ00 Cool White 4000 10000 110 83 4000 10000 110 99 2600 4000 110 77 ASMT-MW62-NHK00 ASMT-MY62-NGJ00 Warm White Notes: 1. θ½ is the off-axis angle where the luminous intensity is ½ the peak intensity. Electrical Characteristic (TA = 25°C) Forward Voltage VF (Volts) @ IF = 150mA Reverse Voltage VR (Volts) Thermal Resistance Rθj-ms (°C/W)[1] Dice Type Typ. Max. Max. Typ. InGaN 3.3 3.7 5 27 Note: 1. Rθj-ms is Thermal Resistance from LED junction to metal slug. 3 FORWARD CURRENT - mA RELATIVE INTENSITY 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 WARM WHITE COOL WHITE 380 430 480 530 580 630 WAVELENGTH - nm 680 730 780 1.4 1.3 1.2 1.1 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 140 160 180 200 MONO PULSE CURRENT - mA Figure 3. Relative Luminous Flux vs. Mono Pulse Current 1 1.5 2 2.5 FORWARD VOLTAGE - V 3 3.5 4 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 4. Radiation Pattern FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25°C) 0.30 COOL WHITE WARM WHITE 0.20 0.10 COOL WHITE 0.00 WARM WHITE -0.10 -0.20 -0.30 -0.40 -50 -25 0 25 50 75 100 JUNCTION TEMPERATURE, TJ -°C Figure 5. Relative Light Output vs. Junction Temperature 4 0.5 0.40 RELATIVE LIGHT OUTPUT - % (NORMALIZED AT 25°C) 120.0 110.0 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 0.0 0 Figure 2. Forward Current vs Forward Voltage NORMALIZED INTENSITY RELATIVE LUMINOUS FLUX (NORMALIZED AT 150 mA) Figure 1. Relative Intensity vs. Wavelength 200 180 160 140 120 100 80 60 40 20 0 125 150 -0.50 -50 -25 0 25 50 75 100 JUNCTION TEMPERATURE,TJ - °C Figure 6. Forward Voltage Shift vs. Junction Temperature 125 150 180 MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA 180 150 120 RθJ-A =140°C/W RθJ-A =120°C/W RθJ-A =100°C/W 90 60 30 0 0 20 40 60 80 100 120 AMBIENT TEMPERATURE, TA - °C 140 160 Figure 7. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 145°C, RθJA = 100°C/W, 120°C/W and 140°C/W 150 120 RθJ-MS = 27°C/W 90 60 30 0 0 20 40 60 80 100 120 AMBIENT TEMPERATURE, TA - °C TEMPERATURE 10 to 30 SEC. 8.40 ± 0.10 255 - 260 °C 3°C/SEC. MAX. -6°C/SEC. MAX. 1.00 ± 0.10 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Figure 9. Recommended Reflow Soldering Flux (lm) at 150mA Bin Min Max G 25.5 33 H 33 43 J 43 56 K 56 73 L 73 95 Tolerance for each bin limits is ±10% 3.1 ± 0.10 5.08 ± 0.10 Figure 10. Recommended soldering land pattern Flux Bin Limit[1] (For reference only) [X1 X2] 5 17.00 ± 0.20 150 °C 3 °C/SEC. MAX. 160 Figure 8. Maximum Forward Current vs. Metal Slug Temperature. Derated based on TJMAX = 145°C, RθJ-MS = 27°C/W. 10.70 ± 0.10 217 °C 200 °C 140 Color bin selection [x3] Individual reel or tube will contain LEDs from one color bin only. Cool White Warm White Selection Bin Selection Bin 0 Full Distribution 0 Full Distribution A A only A A only B B only B B only C C only C C only D D only D D only E E only E E only F F only F F only G G only N A and C only H H only P B and D only L A and G only Q E and C only M B and H only R F and D only N A and C only U E and F only P B and D only W C and D only Q E and C only Z A and B only R F and D only 1 A, B, C and D only S G and H only 4 C, D, E and F only U E and F only W C and D only Z A and B only 1 A, B, C and D only 2 G, H, A and B only 4 C, D, E and F only 6 Primary Color Binning Cool White Color Limits (Chromaticity Coordinates) Bin A X Y 0.367 0.400 0.362 0.372 0.329 0.345 0.329 0.369 Warm White Color Limits (Chromaticity Coordinates) Bin A X Y 0.452 0.434 0.488 0.447 0.470 0.414 0.438 0.403 Bin B X Y 0.362 0.372 0.356 0.330 0.329 0.302 0.329 0.302 Bin B X Y 0.438 0.403 0.470 0.414 0.452 0.384 0.424 0.376 Bin C X Y 0.329 0.369 0.329 0.345 0.305 0.322 0.301 0.342 Bin C X Y 0.407 0.393 0.418 0.422 0.452 0.434 0.438 0.403 Bin D X Y 0.329 0.345 0.329 0.302 0.311 0.285 0.305 0.322 Bin D X Y 0.395 0.362 0.407 0.393 0.438 0.403 0.424 0.376 Bin E X Y 0.303 0.333 0.307 0.311 0.283 0.284 0.274 0.301 Bin E X Y 0.381 0.377 0.387 0.404 0.418 0.422 0.407 0.393 Bin F X Y 0.307 0.311 0.311 0.285 0.290 0.265 0.283 0.284 Bin F X Y 0.373 0.349 0.381 0.377 0.407 0.393 0.395 0.362 Bin G X Y 0.388 0.417 0.379 0.383 0.362 0.372 0.367 0.400 Bin H X Y 0.379 0.383 0.369 0.343 0.356 0.330 0.362 0.372 Tolerances ± 0.01 Tolerances ± 0.01 0.46 G 0.38 A 4.0k 0.36 4.5k C H B 0.34 5.6k 0.32 Black Body Curve 7k D E 0.30 F 10k 0.28 0.26 0.24 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 X - COORDINATE Figure 11. Color bins (Cool White) 7 0.48 Y - COORDINATE Y - COORDINATE 0.44 0.42 0.40 0.44 A 0.42 C 0.40 0.38 0.36 E 4.0k 3.5k D F 3.0k B 2.6k Black Body Curve 0.34 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 X - COORDINATE Figure 12. Color bins (Warm White) Sub-Color Binning (Only Applicable for Color Bin A to Bin D and Bin G to Bin H) Color Limits Cool White Color Limits (Chromaticity Coordinates) Bin A1 X Y 0.364 0.383 0.367 0.400 0.348 0.385 Bin A2 X Y 0.364 0.383 0.362 0.372 Bin A3 X Y 0.329 0.357 Bin A4 X Y Bin B1 Cool White Color Limits (Chromaticity Coordinates) 0.347 0.372 Bin D1 X Y 0.329 0.345 0.329 0.331 0.317 0.320 0.316 0.333 0.346 0.359 0.347 0.372 Bin D2 X Y 0.329 0.331 0.329 0.320 0.318 0.310 0.317 0.320 0.329 0.369 0.348 0.385 0.347 0.372 Bin D3 X Y 0.329 0.320 0.329 0.302 0.320 0.293 0.318 0.310 0.329 0.345 0.329 0.357 0.347 0.372 0.346 0.359 Bin D4 X Y 0.316 0.333 0.317 0.320 0.307 0.311 0.305 0.322 X Y 0.362 0.372 0.360 0.357 0.344 0.344 0.346 0.359 Bin D5 X Y 0.317 0.320 0.318 0.310 0.309 0.300 0.307 0.311 Bin B2 X Y 0.360 0.357 0.358 0.343 0.343 0.331 0.344 0.344 Bin D6 X Y 0.318 0.310 0.320 0.293 0.311 0.285 0.309 0.300 Bin B3 X Y 0.358 0.343 0.356 0.330 0.341 0.314 0.343 0.331 Bin G1 X Y 0.392 0.421 0.386 0.400 0.364 0.383 0.367 0.400 Bin B4 X Y 0.329 0.331 0.329 0.345 0.346 0.359 0.344 0.344 Bin G2 X Y 0.386 0.400 0.382 0.385 0.362 0.372 0.364 0.383 Bin B5 X Y 0.329 0.331 0.344 0.344 0.343 0.331 0.329 0.320 Bin H1 X Y 0.382 0.385 0.378 0.370 0.360 0.357 0.362 0.372 Bin B6 X Y 0.343 0.331 0.341 0.314 0.329 0.302 0.329 0.320 Bin H2 X Y 0.378 0.370 0.375 0.358 0.358 0.343 0.360 0.357 Bin C1 X Y 0.329 0.369 0.329 0.357 0.315 0.344 0.314 0.355 Bin H3 X Y 0.375 0.358 0.371 0.344 0.356 0.330 0.358 0.343 Bin C2 X Y 0.329 0.357 0.329 0.345 0.316 0.333 0.315 0.344 Tolerances ± 0.01 Bin C3 X Y 0.314 0.355 0.315 0.344 0.303 0.333 0.301 0.342 Bin C4 X Y 0.315 0.344 0.316 0.333 0.305 0.322 0.303 0.333 0.44 0.42 0.40 G1 0.38 Y - COORDINATE G2 A1 A3 0.36 C3 0.34 C4 0.32 7k A4 C2 B4 5.6k B5 D1 D2 D4 0.30 C1 D5 D6 H1 A2 B1 B2 4.5k 4.0k H2 H3 Black Body Curve B3 B6 D3 10k 0.28 0.26 0.24 0.24 0.26 0.28 0.30 0.32 0.34 X - COORDINATE Figure 12. Sub-color bins (Cool White) 8 0.36 0.38 0.40 0.42 0.44 Package Tube – Option 0 5.39 10.3 37.00 6.5 20.85 11.00 10.95 6.3 8.3 535.00 SIDE VIEW TOP VIEW Figure 13. Tube dimensions Tape & Reel – Option 1 B Bo W F E A 2.5 B A Ko P SECTION A Ao SECTION B Figure 14. Carrier tape dimensions 9 Dim Value Ao 8.80 ± 0.10 Bo 16.45 ± 0.10 Ko 3.60 ± 0.10 W 24.0 ± 0.10 P 16.0 ± 0.10 Qty/Reel 500 EA Unit: mm END START MINIMUM OF 160 mm OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MOUNTED WITH COMPONENTS MINIMUM OF 390 mm OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. *Note: Tape & Reel Packaging only applicable as per this datasheet only. Figure 15. Carrier tape leader and trailer dimensions Reel Dimension +1.00 24.0 −0.00 2.30 2.30 0 2.50 ± 0.50 0º 60. ∅99.50 ± 1.00 R10.0 50 10. ∅268.00 R ∅13.50 ∅330.00 ± 1.00 120.0º Figure 16. Reel dimensions 10 .50 ±0 ± 0.50 Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body only. Please refer to Avago Application Note AN 5288 for detail information. Moisture Sensitivity This product is qualified as Moisture Sensitive Level 4 per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use – Unopen moisture barrier bag (MBB) can be stored at