ASMT-QRB2-FCD0E

ASMT-QxB2-Fxxxx Super 0.5 W Power PLCC-4 Surface Mount LED Indicator Data Sheet Description The Super 0.5 W Power PLCC-4 SMT LED is an extension of Power PLCC-4 SMT LEDs. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more efficiently compared to the Power PLCC-4 SMT LEDs. These LEDs produce higher light output with better flux performance compared to the Power PLCC-4 SMT LED. The Super 0.5 W Power PLCC-4 SMT LEDs are designed for higher reliability, better performance, and operate under a wide range of environmental conditions. The performance characteristics of these new mid-power LEDs make them uniquely suitable for use in harsh conditions such as in automotive applications, and in electronics signs and signals. To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in single intensity and color bin (except for red), to provide close uniformity. These LEDs are compatible with the IR solder reflow process. Due to the high reliability feature of these products, they also can be mounted using through-the-wave soldering process. Super 0.5 W Power PLCC-4 SMT LED is available in red, red orange and amber colors. Features • Industry Standard PLCC 4 platform (3.2 x 2.8 x 1.9 mm) • High reliability LED package due to enhanced silicone resin material • Mid-power intensity brightness with optimum flux performance using AllnGaP chip technologies • Available in Red, Red Orange and Amber colors • High optical efficiency • Available in 8 mm carrier tape and 7 inch reel • Low thermal resistance • Super wide viewing angle at 120 degrees • Longer life time with minimum degradation due to enhanced Silicone resin material • JEDEC MSL 2a Applications 1. Exterior automotive • Turn signals • Side repeaters • CHSML • Rear combination lamp • Side markers • Truck clearance lamp 2. Electronic signs and signals • Channel lettering • Contour lighting • Indoor variable message sign 3. Office automation, home appliances, industrial equipment • Front panel backlighting • Push button backlighting • Display backlighting CAUTION: ASMT-QxB2-Fxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details. Package Drawing 2.8 ± 0.2 2.2 ± 0.2 C C ∅ 2.40 1.9 ± 0.2 0.8 ± 0.1 0.15 (TYP.) 1.15 ± 0.05 3.2 ± 0.2 3.6 ± 0.2 0.41 (TYP.) 0.56 (TYP.) 0.8 ± 0.3 A ANODE MARKING NOTES: 1. 2. 3. 4. A 0.7 ± 0.1 0.5 ± 0.1 2.30 ± 0.05 ALL DIMENSIONS IN MILLIMETERS. LEAD POLARITY AS SHOWN IN FIGURE 12. TERMINAL FINISH: Ag PLATING. ENCAPSULATION MATERIAL: SILICONE RESIN. Figure 1. Package drawing Table 1. Device Selection Guide Luminous Flux, FV[1] (lm) Color Amber Red Orange Red Part Number ASMT-QAB2-FDE0E ASMT-QHB2-FEF0E ASMT-QRB2-FCD0E Min. Flux (lm) 9.0 11.5 7.0 Typ. Flux (lm) 11.4 14.0 9.8 Max. Flux (lm) 15.0 19.5 11.5 Test Current (mA) 150 150 150 Dice Technology AlInGaP AlInGaP AlInGaP Notes: 1. FV is the total luminous flux output as measured with an integrating sphere at mono pulse conditions. 2. Tolerance = ±12%. Part Numbering System A S M T – Q X1 B 2 – F X2 X3 X4 X5 Packaging Option Color Bin Selection Max. Flux Bin Min. Flux Bin LED Chip Color 2 Table 2. Absolute Maximum Ratings (TA = 25°C) Parameters DC Forward Current[1] Peak Forward Current[2] Power Dissipation Reverse Voltage Junction Temperature Operating Temperature Storage Temperature ASMT-QxB2-Fxxxx 150 mA 200 mA 470 mW 5V 125°C -40°C to +110°C -40°C to +110°C Notes: 1. Derate l inearly as shown in Figure 6. 2. Duty Factor = 10%, Frequency = 1kHz. Table 3. Optical Characteristics (TA = 25°C) Dominant Viewing Luminous Luminous Wavelength Angle 2q1/2[2] Efficacy hV[3] Efficiency lD[1] (nm) (Degrees) (lm/W) he(lm/W) Typ. 120 120 120 Typ. 450 210 170 Typ. 28 35 21 594.5 617.0 624.0 Luminous Intensity /Total Flux[4,5] IV (mcd) / ΦV Fn (lm) Typ. 0.30 0.30 0.30 Color Amber Red Part Number Dice Technology Typ. ASMT-QAB2-Fxxxx AlInGaP ASMT-QRB2-Fxxxx AlInGaP Red Orange ASMT-QHB2-Fxxxx AlInGaP Notes: 1. The dominant wavelength, lD, is derived from the CIE Chromaticity diagram and represents the color of the device. 2. q1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = IV/hV, where IV is the luminous intensity in candelas and hV is the luminous efficacy in lumens/watt. 4. Fn is the total luminous flux output as measured with an integrating sphere after the device has stabilized. 5. Flux tested at mono pulse conditions. Table 4. Electrical Characteristics (TA = 25°C) Forward Voltage VF (Volts) @ IF = 150 mA Part Number ASMT-QAB2-Fxxxx ASMT-QHB2-Fxxxx ASMT-QRB2-Fxxxx Typ. 2.70 2.70 3.10 Max. 3.25 3.25 3.55 Reverse Voltage VR @ 100 µA Min. 5 5 5 60 60 60 Thermal Resistance RqJ-P (°C/W) 3 1.0 0.9 0.8 RELATIVE INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 430 480 530 580 630 AlInGaP AMBER AlInGaP RED-ORANGE AlInGaP RED 680 730 780 WAVELENGTH – nm Figure 2. Relative intensity vs. wavelength 200 180 FORWARD CURRENT – mA 160 140 120 100 80 60 40 20 0 0 AlInGaP AMBER RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 150 mA) 1.2 1.0 0.8 0.6 RED/RED-ORANGE 0.4 0.2 0 AMBER AlInGaP RED AlInGaP RED-ORANGE 1 2 3 4 0 50 100 150 200 FORWARD VOLTAGE – V DC FORWARD CURRENT – mA Figure 3. Forward current vs. forward voltage Figure 4. Relative intensity vs. forward current 2.2 MAXIMUM FORWARD CURRENT – mA 2.0 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 25 °C) 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -50 -25 0 25 50 75 100 125 RED AMBER RED-ORANGE 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 RθJA = 100°C/W RθJA = 110°C/W RθJA = 130°C/W RθJA = 80°C/W JUNCTION TEMPERATURE – °C AMBIENT TEMPERATURE – °C Figure 5. Relative intensity vs. temperature Figure 6a. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 125°C, RqJ-A = 130°C/W, 110°C/W, 100°C/W and 80°C/W. 4 160 RθJP = 60°C/W 630 AlInGaP RED DOMINANT WAVELENGTH – nm 620 AlInGaP RED-ORANGE 610 600 AlInGaP AMBER 590 580 140 120 CURRENT – mA 100 80 60 40 20 0 0 20 40 60 80 100 120 0 50 100 150 200 TEMPERATURE – °C FORWARD CURRENT – mA Figure 6b. Maximum forward current vs. solder point temperature. Derated based on TJMAX = 125°C, RJP = 60°C/W. Figure 7. Dominant wavelength vs. forward current – AlInGaP devices 0.15 FORWARD VOLTAGE SHIFT (V) 0.10 NORMALIZED INTENSITY -25 0 25 50 75 100 0.05 0 -0.05 -0.10 -0.15 -50 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 90 TJ – JUNCTION TEMPERATURE – °C ANGULAR DISPLACEMENT – DEGREES Figure 8. Forward voltage shift vs. temperature Figure 9. Radiation pattern 10 - 30 SEC. 255 - 260 °C 217 °C 200 °C 150 °C 3 °C/SEC. MAX. 60 - 120 SEC. 100 SEC. MAX. 3 °C/SEC. MAX. -6 °C/SEC. MAX. D TEMPERATURE TIME (Acc. to J-STD-020C) Note: Diameter "D" should be smaller than 2.2mm Figure 11. Recommended Pb-free reflow soldering profile Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components. Figure10. Recommended pick and place nozzle size 5 2.4 0.6 0.9 X 6 1.3 x 6 C C C C 0.4 1.4 A A 4.6 A ANODE MARKING A A A 0.3 SOLDER MASK A C ANODE CATHODE ANODE MARKING MINIMUM 55 mm2 OF ANODE PAD FOR IMPROVED HEAT DISSIPATION Figure 12. Recommended soldering pad pattern TRAILER 200 mm MIN. FOR ∅180 REEL. 200 mm MIN. FOR ∅330 REEL. COMPONENT LEADER 480 mm MIN. FOR ∅180 REEL. 960 mm MIN. FOR ∅330 REEL. C A USER FEED DIRECTION Figure 13. Tape leader and trailer dimensions 6 ∅1.5 + 0.1 –0 4 ± 0.1 2 ± 0.05 B 1.75 ± 0.1 3.6 ± 0.1 A A 5.5 ± 0.05 12 + 0.3 – 0.1 3.8 ± 0.1 C C A ∅1 + 0.1 –0 B 3.45 ± 0.1 A 8 ± 0.1 0.229 ± 0.01 VIEW B-B VIEW A-A ALL DIMENSIONS IN mm. Figure 14. Tape dimensions USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 15. Reeling orientation 7 Device Color (X1) A H R Amber Red Orange Red Color Bin Select (X4) Individual reel will contain parts from one full bin only. X4 0 A B Full Distribution 1 and 2 only 2 and 3 only 3 and 4 only 4 and 5 only 5 and 6 only 1, 2 and 3 only 2, 3 and 4 only 3, 4 and 5 only 4, 5 and 6 only 1, 2, 3 and 4 only 2, 3, 4 and 5 only 3, 4, 5 and 6 only 1, 2, 3, 4 and 5 only 2, 3, 4, 5 and 6 only Special Color Bin Flux Bin Select (X2X3) Individual reel will contain parts from one bin only. X2 X3 Min Flux Bin Max Flux Bin C D E G H J Flux Bin Limits Bin ID A B C D E F G H I J K Min. (lm) 4.30 5.50 7.00 9.00 11.50 15.00 19.50 25.50 33.00 43.00 56.00 Max. (lm) 5.50 7.00 9.00 11.50 15.00 19.50 25.50 33.00 43.00 56.00 73.00 K M N P R S Z Color Bin Limits Amber/Yellow 2 3 4 5 6 Red Orange 1 2 3 Red Full Distribution Min. (nm) 583.0 586.0 589.0 592.0 595.0 Min. (nm) 611.0 616.0 620.0 Min. (nm) 620.0 Max. (nm) 586.0 589.0 592.0 595.0 598.0 Max. (nm) 616.0 620.0 625.0 Max. (nm) 635.0 Tolerance of each bin limit = ±12%. Tolerance of each bin limit = ±1 nm. 8 VF Binning Bin 2D 2E 2F 2G 2H 2J 2K 2L Min. 2.35 2.50 2.65 2.80 2.95 3.10 3.25 3.40 Max. 2.50 2.65 2.80 2.95 3.10 3.25 3.40 3.55 Moisture Sensitivity This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precaution when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use - Unopen moisture barrier bag (MBB) can be stored at