ASMT-RA45

ASMT-Rx45-xxxxx 0.45mm Leadframe-Based Surface Mount ChipLED Data Sheet Description Avago Technologies’ ultra-thin ASMT-Rx45 ChipLEDs were developed based on the industrial standard ChipLED 0603 platform which requires less board space. These ChipLEDs provide a wide viewing angle of 130 degrees to improve visibility in bright sunlight. In addition to the high-brightness and compact size, Avago’s ASMT-Rx45 ChipLEDs provide two significant advantages in the production environment: They can be easily soldered using IR solder reflow process, and the package is qualified to a Joint Electronic Device Engineering Council (JEDEC) moisture sensitive level (MSL) rating of 2a. For manufacturers, this rating means that these ChipLEDs can be kept in the open air (30 degrees C, 60 percent relative humidity) for up to four weeks after being removed from its sealed package without the need to remove absorbed moisture. Avago’s ultra-thin Leadframe ChipLED available in Red, Orange, Yellow Green and Amber colors, the ASMT-Rx45 series is ideal for use by lighting designers developing backlighting for dashboards and entertainment consoles in automobiles, backlighting of industrial switches and buttons, and small pixel indoor signs. Features • Industrial 0603 platform – 1.6 x 0.8 x 0.45mm • Automotive qualified • Super wide 130 deg viewing angle • JEDEC MSL 2a. • Robust Operating Temperature from - 40 to +100 °C • Junction Temperature Tj = 110 °C • RoHS & IR Reflow compatible Applications 1. Interior Automotive • Navigation backlighting • Audio panel backlighting • Push Button backlighting 2. Office Automation, home appliances and industrial equipment • Front panel backlighting • Push Button backlighting • LCD backlighting • Switches backlighting • Navigation backlighting CAUTION: ASMT-Rx45 LEDs are Class 1C ESD sensitive per JESD22-A114C.01. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details. Package Dimensions 0.8 LED Die 0.45 Lead Frame Cathode Side 0.6 1.6 1.1 Resin Device Selection Guide Package Dimension (mm) 1.6 (L) x 0.8 (W) x 0.45 (H) 1.6 (L) x 0.8 (W) x 0.45 (H) 1.6 (L) x 0.8 (W) x 0.45 (H) 1.6 (L) x 0.8 (W) x 0.45 (H) Die Technology AlInGaP AlInGaP AlInGaP AlInGaP Colors Red Orange Yellow Green Amber Parts per Reel 4000 4000 4000 4000 Package Description Untinted, Diffused Untinted, Diffused Untinted, Diffused Untinted, Diffused Part Numbering System A S M T - R X1 45 - X2 X3 X4 X5 X6 Packaging Option Color Bin Selection Max. Flux Bin Min. Flux Bin LED Chip Color  0.4 Absolute Maximum Ratings at TA = 25°C Parameter DC Forward Current [1] Power Dissipation Reverse Voltage (IR = 100mA) LED Junction Temperature Operating Temperature Range Storage Temperature Range Notes: 1. Applies when single LED is lit up. ASMT-Rx45 0 48 5 110 -40 to +100 -40 to +100 Units mA mW V °C °C °C Electrical Characteristics at TA = 25°C Forward Voltage, VF ( Volts) [1] @ IF =20mA Part Number ASMT-RR45 ASMT-RJ45 ASMT-RF45 ASMT-RA45 Notes: 1. VF Tolerance: ±0.1V Reverse Breakdown VR ( Volts) @ IR = 100mA Max .4 .4 .4 .4 Min 5 5 5 5 Thermal Resistance RqJ-PIN (°C/W) Typical 46 46 46 46 Min 1.6 1.6 1.6 1.6 Typ .0 .0 .0 .0 Optical Characteristics at TA = 25°C Luminous Intensity IV [1] (mcd) @ 20mA Part Number ASMT-RR45 ASMT-RJ45 ASMT-RF45 ASMT-RA45 Color Red Orange Yellow Green Amber Min. 50 50 6 40 Typ. 10 10 60 90 Peak Wavelength lpeak (nm) Typical 66 61 574 59 Dominant Wavelength ld [2] (nm) Typical 6 605 57 591 Viewing Angle 2q1/2 [3] (Degrees) Typical 145 145 145 145 Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED package. 2. The dominant wavelength, ld, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. q½ is the off-axis angle where the luminous intensity is ½ the peak intensity.  Intensity Bin Select (X3X4) Individual reel will contain parts from one half bin only X3 X4 0   4 5 6 7 8 9 Full Distribution  half bins starting from X1  half bins starting from X1 4 half bins starting from X1 5 half bins starting from X1  half bins starting from X  half bins starting from X 4 half bins starting from X 5 half bins starting from X Min IV Bin Light Intensity (IV) Bin Limits Intensity (mcd) Bin ID A1 A B1 B C1 C D1 D E1 E F1 F G1 G H1 H J1 J K1 K L1 L M1 M N1 N P1 P Q1 Q R1 R S1 S Tolerance: ±15% Min. 0.11 0.14 0.18 0. 0.9 0.6 0.45 0.57 0.7 0.90 1.10 1.41 1.80 .4 .80 .55 4.50 5.70 7.0 9.00 11.0 14.0 18.00 .50 8.00 6.00 45.00 57.00 71.50 90.00 11.00 14.00 180.00 7.00 Max. 0.14 0.18 0. 0.9 0.6 0.45 0.57 0.7 0.90 1.10 1.41 1.80 .4 .80 .55 4.50 5.70 7.0 9.00 11.0 14.0 18.00 .50 8.00 6.00 45.00 57.00 71.50 90.00 11.00 14.00 180.00 7.00 85.00 4 Color Bin Select (X5) Individual reel will contain parts from one full bin only. X5 0 Z Y W V U T S Q P N M L K J 1   4 5 6 Full Distribution A and B only B and C only C and D only D and E only E and F only F and G only G and H only A, B and C only B, C and D only C, D and E only D, E and F only E, F and G only F, G and H only Special Color Bin A, B, C and D only E, F, G and H only B, C, D and E only C, D, E and F only A, B, C, D and E only B, C, D, E, and F only Color Bin Limits Yellow Green Color Bin Dominant Wavelength (nm) Bin ID E F G H Yellow/Amber Color Bin Dominant Wavelength (nm) Bin ID A B C D E F Orange Color Bin Dominant Wavelength (nm) Bin ID A B C D E Package Type Top Mount Top Mount Top Mount Reel Size 7 Inch 7 Inch 7 Inch Red Color Bin Dominant Wavelength (nm) Bin ID Full Distribution Tolerance: ±1nm Min. 564.5 567.5 570.5 57.5 Max. 567.5 570.5 57.5 576.5 Min. 58.0 584.5 587.0 589.5 59.0 594.5 Max. 584.5 587.0 589.5 59.0 594.5 597.0 Min 597.0 600.0 60.0 606.0 609.0 Max 600.0 60.0 606.0 609.0 61.0 Packaging Option (X6) Option  H K Test Current 0 mA  mA 5 mA Min. 60.0 Max. 65.0 Forward Voltage (VF) Bin Limits Forward Voltage (V) Bin ID 1   4 Tolerance: ±0.1V Minimum 1.60 1.80 .00 .0 Maximum 1.80 .00 .0 .40 5 1 0.9 0.8 RELATIVE INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 430 480 AMBER YELLOW GREEN ORANGE RED 100 IF - FORWARD CURRENT - mA AMBER/ ORANGE 10 RED YELLOW GREEN 530 580 630 680 730 780 WAVELENGTH-nm 1 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 V F - FORWARD VOLTAGE - V Figure 1. Relative intensity vs. wavelength. Figure 2. Forward current vs. forward voltage. 1.40 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20mA) MAX. FORWARD CURRENT - mA 0 5 10 15 20 25 30 1.20 1.00 0.80 0.60 0.40 0.20 0.00 25 20 15 10 5 0 0 20 40 60 80 100 120 IF - FORWARD CURRENT - mA AMBIENT TEMPERATURE - °C Figure 3. Luminous intensity vs. forward current. Figure 4. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 110°C, RqJA = 465°C/W 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 ANGLE RELATIVE INTENSITY Figure 5. Radiation pattern. Figure 6. Recommended soldering land pattern. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1mm (±0.004in.) unless otherwise specified. 6 10 to 30 SEC. 20 SEC. MAX. TEMPERATURE 240 oC/ MAX. 3 oC/SEC. MAX. 100-150 oC 3 oC/SEC. MAX. 120 SEC. MAX. TIME 60-150 SEC. TEMPERATURE 217 C 200 oC 150 oC o 255 - 260 C 3 oC/SEC. MAX. 6 oC/SEC. MAX. 3 oC/SEC. MAX. 60 - 120 SEC. TIME 100 SEC. MAX. (Acc. to J-STD-020C) o 183 oC -6 oC/SEC. MAX. Figure 7a. Recommended reflow soldering profile. Figure 7b. Recommended Pb-free reflow soldering profile. Notes: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components. [0.157] 4.00 [0.157] [0.069] 4.00 [0.059] 1.50 [SEE TABLE 1] DIM. C 0.254 +/- 0.02 [0.01 +/- 0.001] 1.75 3.50 +/- 0.05 [SEE TABLE] 8.00 +/- 0.30 [0.315 +/- 0.012] DIM. A [0.14 +/- 0.002] [SEE TABLE] DIM. B Diam. 0.60 +/- 0.05 CARRIER TAPE USER FEED DIRECTION COVER TAPE Figure 8. Tape Dimensions. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 9. Reeling Orientation. 7 This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use - Unopen moisture barrier bag (MBB) can be stored at