ASMT-SGB5-ZW7Q3

ASMT-SxB5-Zxxxx Surface Mount LED Indicator Description Avago Power PLCC-4 is an extension of our PLCC-2 SMT LEDs. The package can be driven at higher current due to its superior package design. The product is able to dissipate heat more efficiently compared to the conventional PLCC-2 SMT LEDs. In proportion to the increase in driving current, this family of LEDs is able to produce higher light output compared to the conventional PLCC-2 SMT LEDs. These SMT LEDs have higher reliability and better performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used as interior signs application conditions. These LEDs are compatible with IR solder reflow process. The wide viewing angle at 120° makes these LEDs ideally suited for panel, push button, offi ce equipment, industrial equipment, and home appliances. The fl at top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in refl ector pushing up the intensity of the light output, these LEDs are also suitable to be used as LED pixels in interior electronic signs. Features  Industry standard PLCC-4  High reliability LED package  High brightness using InGaN dice technologies  High optical efficiency  Higher ambient temperature at the same current possible compared to PLCC-2  Available in full selection of colors  Super wide viewing angle at 120˚  Available in 8mm carrier tape on 7-inch reel  Compatible with both IR and TTW soldering process  Stabile & Consistent performance with minimum degradation with Silicone Encapsulation  JEDEC MSL3 Applications  Electronic signs and signals - Interior full color sign - Variable message sign  Office automation, home appliances, industrial equipment - Front panel backlighting - Push button backlighting - Display backlighting CAUTION: ASMT-SxB5-Zxxxx LEDs are Class 1C ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details. Package Dimensions NOTE: ALL DIMENSIONS IN MILLIMETERS. ELECTRICAL CONNECTION BETWEEN ALL CATHODES IS RECOMMENDED. Table 1. Device Selection Guide Color Blue Blue Blue Blue Blue Blue Green Green Green Green Green Green Green Part Number ASMT-SBB5-ZT703 ASMT-SBB5-ZT7P3 ASMT-SBB5-ZT7Y3 ASMT-SBB5-ZU3Q3 ASMT-SBB5-ZU3P3 ASMT-SBB5-ZU3Y3 ASMT-SGB5-ZW703 ASMT-SGB5-ZW7Q3 ASMT-SGB5-ZW7P3 ASMT-SGB5-ZW7Y3 ASMT-SGB5-ZX3Q3 ASMT-SGB5-ZX3P3 ASMT-SGB5-ZX3Y3 Min IV (mcd) 355.00 355.00 355.00 450.00 450.00 450.00 1400.00 1400.00 1400.00 1400.00 1800.00 1800.00 1800.00 Max. IV (mcd) 715.00 715.00 715.00 900.00 900.00 900.00 2850.00 2850.00 2850.00 2850.00 3550.00 3550.00 3550.00 Test Current (mA) 30 30 30 30 30 30 30 30 30 30 30 30 30 Dice Technology InGaN InGaN InGaN InGaN InGaN InGaN InGaN InGaN InGaN InGaN InGaN InGaN InGaN Notes: 1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. IV Tolerance = ±12% Part Numbering System A S M T - S x1 B 5 - Z x2 x3 x4 x5 Packaging Option Color Bin Selection Intensity Bin Selection LED Chip Color B- Blue G- Green Table 2. Absolute Maximum Ratings (TA = 25 °C) Parameters DC Forward Current [1] Peak Forward Current [2] Power Dissipation Junction Temperature Operating Temperature Storage Temperature ASMT-SxB5 30mA 90mA 114 mW 110 °C - 40 °C to + 100 °C - 40 °C to + 100 °C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty Factor = 10%, Frequency = 1kHz. 3. Drive current between 10 mA and 20 mA is recommended for best long term performance. 4. Operation at current below 5 mA is not recommended. Table 3. Optical Characteristics (TA = 25 °C) Color Part Number Dice Technology Blue Green ASMT-SBB5 ASMT-SGB5 InGaN InGaN Dominant Wavelength[1] λD (nm) Typ. 470 525 Viewing Angle 2½[2] (Degrees) Typ. 120 120 Notes: 1. The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device 2. ½ is the off-axis angle where the luminous intensity is ½ the peak intensity. 3. The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device. Table 4. Electrical Characteristics (TA = 25 °C) Part Number ASMT-SxB5 Forward Voltage VF (Volts) @ IF = 30 mA Typ. Max. 3.2 4.1 1 0.9 RELATIVE INTENSITY 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 430 480 530 580 630 680 730 780 WAVELENGTH - nm Figure 1. Relative Intensity Vs. Wavelength (ASMT-SBB5 and ASMT SGB5) 35 1.2 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 30 mA) FORWARD CURRENT - mA 30 25 20 15 10 1.0 0.8 0.6 0.4 0.2 5 0 0.0 0 1 2 3 FORWARD VOLTAGE - V Figure 2. Forward Current Vs. Forward Voltage 4 0 5 10 15 20 25 DC FORWARD CURRENT - mA 30 Figure 3. Relative Intensity Vs. Forward Current 35 1.0 30 0.9 25 NORMALIZED INTENSITY MAXIMUM FORWARD CURRENT - mA 35 20 15 10 5 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 AMBIENT TEMPERATURE - °C Figure 4. Maximum Forward Current Vs. Ambient Temperature. Derated Based on TJMAX = 110°C, RθJA=300°C/W Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting Figure 6. Recommended Pb-free Reflow Soldering Profile 0.0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES Figure 5. Radiation Pattern 90 Figure 7. Recommended Soldering Pad Pattern Figure 8. Tape Leader and Trailer Dimensions Figure 9. Tape Dimensions Figure 10. Reel dimensions Figure 11. Reeling Orientation Handling Precaution D. Control of assembled boards The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body only. Please refer to Avago Application Note AN 5288 for detail information. - Moisture Sensitivity - This product is qualified as Moisture Sensitive Level 3 per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use - - Unopen moisture barrier bag (MBB) can be stored at