ASMT-UYBG-NACJ8

ASMT-UYBG / ASMT-UYBH / ASMT-UYBJ 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description The 0.25W Warm White Power PLCC4 SMT LED is using InGaN chip technology. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more efficiently. These LEDs produce higher light output with better flux performance. The 0.25W Warm White Power PLCC4 SMT LEDs are designed for higher reliability, better performance, and operate under a wide range of environmental conditions. To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in single intensity and color bin, to provide close uniformity. Features (1) 2700K to 3500K CCT (2) ANSI bin (3) Wide viewing angle 120° (4) High reliability package with enhanced silicone resin encapsulation Applications (1) Fluorescent replacement (2) Under cabinet lighting (3) Panel lights (4) Retail display lighting Package Drawing 1. 2. Dimensions in mm. Terminal Finish: Ag plating. Device Selection Guide (TJ = 25 °C) Color Part Number CCT (K) CRI Luminous Flux (lm)1,2 Typ Min Typ Max Test Current (mA) Chip Warm White ASMT-UYBG-NAC18 2700 ~ 3500 85 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBG-NACG8 3500 85 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBG-NACH8 3000 85 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBG-NACJ8 2700 85 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBH-NAC18 2700 ~ 3500 75 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBH-NACG8 3500 75 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBH-NACH8 3000 75 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBH-NACJ8 2700 75 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBJ-NAC18 2700 ~ 3500 65 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBJ-NACG8 3500 65 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBJ-NACH8 3000 65 18.1 19.0 35.2 80 InGaN Warm White ASMT-UYBJ-NACJ8 2700 65 18.1 19.0 35.2 1. 2. InGaN 80 Luminous flux is the total luminous flux output as measured with an integrating sphere at mono pulse conditions. Tolerance ±12%. Part Numbering System A S M T – U X1 B x – N X2 X3 X4 X5 Packaging Option Colour Bin Max Flux Bin Min Flux Bin Color W – Cool White Y – Warm White Absolute Maximum Ratings (TA = 25 °C) Parameter DC Forward Current Peak Forward Current (D = 10%, f = 1kHz) Power Dissipation Reverse Voltage Junction Temperature Operating Temperature Storage Temperature Rating 100 200 360 Not recommended 125 -40 to 100 -40 to 100 Unit mA mA mW V °C °C °C Optical / Electrical Characteristics (TJ = 25 °C) Parameter Test Condition Viewing Angle 2θ1/2 1 Min Typ 120 Forward Voltage VF 2 IF = 80mA 3.4 Thermal Resistance RTH junction to pin 50 1. 2. Max ½ is the off-axis angle where the luminous intensity is ½ the peak intensity. Tolerance ±0.1V. Unit degree 3.6 V °C/W 250 FORWARD CURRENT - mA RELATIVE LUMINOUS FLUX (NORMALIZED AT 80 mA) 2.5 2 1.5 1 200 150 100 0.5 50 0 0 1 3 FORWARD VOLTAGE - V 0 0 50 100 150 200 250 DC FORWARD CURRENT - mA Relative Luminous Flux vs. Forward Current Forward Current vs. Forward Voltage 1 NORMALIZED INTENSITY 2 0.75 0.5 0.25 0 -90 -60 -30 0 30 ANGULAR DISPLACEMENT - DEGREES Radiation Diagram 60 90 4 1.2 Relative Intensity 1.0 0.8 CRI85 0.6 CRI75 CRI65 0.4 0.2 0.0 380 480 580 Wavelength-nm RELATIVE LUMINOUS FLUX (NORMALIZE AT 25DEGC) Spectrum Distribution 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -15 10 35 60 85 110 135 JUNCTION TEMPERATURE, TJ -°C Relative Light Output 680 780 0.120 0.100 If-A 0.080 0.060 0.040 0.020 0.000 0 10 20 30 40 50 60 70 80 90 100 110 Ta-'C Forward Current Derating Curve. RTHja 140°C/W. Recommended Pb Free Reflow Soldering Profile Recommended Solder Pad Carrier Tape Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body only. Device Color (X1) W Y Cool White Warm White Flux Bin (X2X3) Individual reel will contain parts from one bin only. X2 Min Flux Bin X3 Max Flux Bin Bin A B C D E F G H J K Tolerance ± 12% Color Bin (X4) Individual reel will contain parts from one sub bin only. Bin Sub Bin A 1A, 1B, 1C, 1D B 2A, 2B, 2C, 2D C 3A, 3B, 3C, 3D D 4A, 4B, 4C, 4D E 5A, 5B, 5C, 5D F 6A, 6B, 6C, 6D G 7A, 7B, 7C, 7D H 8A, 8B, 8C, 8D Min (lm) 18.1 23.5 30.6 35.2 39.8 45.7 51.7 56.8 62.0 67.2 Max (lm) 23.5 30.6 35.2 39.8 45.7 51.7 56.8 62 67.2 73.9 J K L M N P R S 0 9A, 9B, 9C, 9D 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D 3A, 3B, 3C, 3D, 4A, 4B, 4C, 4D 4A, 4B, 4C, 4D, 5A, 5B, 5C, 5D 5A, 5B, 5C, 5D, 6A, 6B, 6C, 6D 7A, 7B, 7C, 7D, 8A, 8B, 8C, 8D 8A, 8B, 8C, 8D, 9A, 9B, 9C, 9D 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D, 4A, 4B, 4C, 4D, 5A, 5B, 5C, 5D, 6A, 6B, 6C, 6D 7A, 7B, 7C, 7D, 8A, 8B, 8C, 8D, 9A, 9B, 9C, 9D 1 Sub Bin 1A 1B 1C 1D 2A 2B 2C 2D 3A 3B 3C 3D 4A 4B 4C 4D 5A 5B 5C 5D 6A 6B x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.2984 0.3133 0.3048 0.3207 0.3028 0.3304 0.3115 0.3391 0.3130 0.3290 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3371 0.3490 0.3376 0.3616 0.3463 0.3687 0.3451 0.3554 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659 0.3670 0.3578 0.3702 Chromaticity Coordinates 0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207 0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373 0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620 0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3702 0.3722 0.3736 0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113 0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369 0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487 0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3825 0.3798 0.3869 0.3009 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042 0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427 0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521 0.3783 0.3646 0.3825 6C 6D 7A 7B 7C 7D 8A 8B 8C 8D 9A 9B 9C 9D y x y x y x y x y x y x y x y x y x y x y x y x y x y x y 0.3722 0.3825 0.3798 0.3783 0.3646 0.3889 0.3690 0.3941 0.3848 0.4080 0.3916 0.4017 0.3751 0.4147 0.3814 0.4221 0.3984 0.4342 0.4028 0.4259 0.3853 0.4373 0.3893 0.4465 0.4071 0.4582 0.4099 0.4483 0.3919 0.3874 0.3869 0.3958 0.3825 0.3798 0.3941 0.3848 0.3996 0.4015 0.4146 0.4089 0.4080 0.3916 0.4221 0.3984 0.4299 0.4165 0.4430 0.4212 0.4342 0.4028 0.4465 0.4071 0.4562 0.4260 0.4687 0.4289 0.4582 0.4099 0.3958 0.4006 0.4044 0.3950 0.3875 0.4080 0.3916 0.4146 0.4089 0.4299 0.4165 0.4221 0.3984 0.4342 0.4028 0.4430 0.4212 0.4562 0.4260 0.4465 0.4071 0.4582 0.4099 0.4687 0.4289 0.4813 0.4319 0.4700 0.4126 0.3798 0.3950 0.3875 0.3898 0.3716 0.4017 0.3751 0.4080 0.3916 0.4221 0.3984 0.4147 0.3814 0.4259 0.3853 0.4342 0.4028 0.4465 0.4071 0.4373 0.3893 0.4483 0.3919 0.4582 0.4099 0.4700 0.4126 0.4593 0.3944 Tolerance ±0.01 Color Bin Packaging Option (X5) Option 8 Test Current 80mA Package Type Top Mount Reel Size 7 Inch Forward Voltage Bin Bin F05 F06 F07 F08 Tolerance ± 0.1V Min (V) 2.8 3.0 3.2 3.4 Max (V) 3.0 3.2 3.4 3.6 DISCLAIMER AVAGO’S PRODUCTS AND SOFTWARE ARE NOT SPECIFICALLY DESIGNED, MANUFACTURED OR AUTHORIZED FOR SALE AS PARTS, COMPONENTS OR ASSEMBLIES FOR THE PLANNING, CONSTRUCTION, MAINTENANCE OR DIRECT OPERATION OF A NUCLEAR FACILITY OR FOR USE IN MEDICAL DEVICES OR APPLICATIONS. CUSTOMER IS SOLELY RESPONSIBLE, AND WAIVES ALL RIGHTS TO MAKE CLAIMS AGAINST AVAGO OR ITS SUPPLIERS, FOR ALL LOSS, DAMAGE, EXPENSE OR LIABILITY IN CONNECTION WITH SUCH USE.