BCM53003B0KPB

BCM53001/BCM53003 ® Brief OPTIMIZED COMMUNICATIONS PROCESSOR WITH NETWORK ACCELERATION SUMMARY OF BENEFITS FEATURES • Latest MIPS32® 74K Core • Dual-issue machine with out-of-order execution • 32-KB I-cache, 32-KB D-cache • Supports DSP ASE v2.0 • BCM53001: 400 MHz (800 DMIPS) • BCM53003: 600 MHz (1200 DMIPS) • On-chip Network Acceleration • Supports L2/L3/L4 packet classification • ContentAware™ processing based on TCAM technology • Traffic Quality of Service (QoS) assignment • Integrated SoC RAM • 512 KB • Dual Gigabit Ethernet Media Access Control (MAC) • 1-GMAC (SGMII) • 1-GMAC (MII/RGMII) • DDR2 Memory Controller • 200 MHz – 333 MHz (16 or 32 bits) • Maximum memory size: 1 GB • On-chip PHY • Dual PCI Express® Interface • Each interface supports x1 lane • Compliant with PCI Express base specification v1.1 • On-chip SerDes • Single USB 2.0 Host Port with on-chip PHY • Flash Memory • Support for both Serial Flash (up to 32 MB) and Parallel Flash (up to 256 MB) • Both NOR and NAND types • TDM Interface • Support for up to two full-duplex VoIP channels • Additional Peripheral Interfaces • UART, I2C, SPI, MDIO, JTAG, GPIO • 65 nm LP process • Industry-leading Price/Performance • Powered by superscalar MIPS74K CPU core running at 600 MHz • Latest high-speed interfaces such as PCIe™, dual GMACs, and DDR2 • Low-cost benefits of 65 nm LP process technology • Optimized Mix of CPU Performance and Peripherals • Allows high CPU utilization due to balance of interconnect, I/O, and memory bandwidth with CPU performance • On-chip packet processing allows for significant processing throughput available for other control plane tasks • Point-to-point interconnect fabric (AXI) provides highbandwidth and low-latency for on-chip processing requirements • Complete Solutions for Targeted Applications • Switch Control and Management, Metro Ethernet Customer Premises Equipment (CPE), Enterprise Access Point • Total hardware solution with Broadcom SMB and Enterprise switches (ROBO and XGS) and PHYs • Broadcom FASTPATH® and SmartPATH™ management software provides fast time-to-market for Enterprise and SMB switches, Metro Ethernet CPE, and Enterprise Access Point applications • Evaluation/development boards available for target applications • Cost-Effective and Power-Efficient • • • • Highly integrated device requiring fewer external components Flash memory with support for both NOR and NAND types DDR2 memory interface to connect to commodity memory Produced in low power 65 nm LP process technology OVERVIEW 16b/32b RGMII or MII MIPS32 Core (600 MHz) DDR2 PHY DDR2 Memory Controller I-Cache D-Cache 32 KB 32 KB AXI EJTAG 480 Mbps 2.5 Gbps 2.5 Gbps SerDes SerDes SerDes USB PHY PCIe 1x1 SOCRAM (512 KB) SGMII/ SerDes AXI PCIe 1x1 USB 2.0 Host GMAC GMAC Packet Processing Packet Processing DMA DMA AXI AXI AXI TDM Peripheral Interface GPIO Serial Parallel SPI Flash Flash 8b/16b I2C PCM UART/ UART I2C Two VoIP Channels BCM53001/BCM53003 Block Diagram The BCM53001/BCM53003 is a family of communication processors designed to deliver leading-edge system-level performance while still being very cost-effective and power-efficient. Optimized for price/ performance, it is designed for next-generation communication applications in switch control and management, Metro Ethernet CPE, and Enterprise access points. Complete solutions, including processor, switch, PHY, and management software, are available for all target applications. Evaluation boards for each target application provide a fast time-to-market platform for system development. At the heart of the processor is the powerful MIPS74K core, capable of running at a maximum frequency of 600 MHz. With a superscalar dualissue pipeline and out-of-order execution, the processor delivers up to 2 DMIPS/MHz. Furthermore, the BCM53001/BCM53003 features specialized network acceleration hardware, enabling it to offload CPU intensive processing tasks. The point-to-point interconnect fabric (AXI) ensures there are no performance bottlenecks for on-chip processing. The MIPS74K core is complemented by the latest high-speed interfaces such as dual GMACs, PCIe, USB 2.0, and DDR2 enabling the BCM53001/BCM53003 to deliver leading-edge system performance. The processor also integrates a TDM interface providing support for up to two full-duplex VoIP channels. Manufactured using 65 nm LP process technology, the processor is optimized for low-power consumption. The processor is available in two versions: 1. BCM53001—400-FBGA package at 400 MHz 2. BCM53003—484-PBGA package at 600 MHz Broadcom®, the pulse logo, Connecting everything®, the Connecting everything logo, ContentAware™ , FASTPATH®, and SmartPATH™ are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners. ® BROADCOM CORPORATION 5300 California Avenue Irvine, California 92617 © 2009 by BROADCOM CORPORATION. All rights reserved. 53001_53003-PB00-R 02/23/09 Phone: 949-926-5000 Fax: 949-926-5203 E-mail: info@broadcom.com Web: www.broadcom.com