HDSM-291C

HDSM-291x/293x 0.28” (7.0mm) Dual digit surface mount LED display Data Sheet Description Features The HDSM-291x/293x is a single digit display of 0.28” (7.0mm) height. This device utilizes AlInGaP / GaAs chips and has a grey surface with white segments. • 0.28” digit height • Low current operation • Excellent characters appearance • Available in CA and CC • 1000 pieces per reel • Moisture sensitivity level: Level 4 • RoHS compliant Red Green Yellow Orange Description HDSM-291C HDSM-291H HDSM-291F HDSM-291L Common Anode, Upper and Lower Decimal HDSM-293C HDSM-293H HDSM-293F HDSM-293L Common Cathode, Upper and Lower Decimal Package Dimensions 0.8 10 o 3.15 0.6 3.75 MAX 0.1 2.1 7.0 10.0 12.0 PART NO. DATE CODE BIN CODE PIN 1 7.6 12-R0.7 15.1 2.54 X 5 = 12.70 DIG 1 DP1 DIG 2 A F B G E C D Notes: 1. All dimensions are in millimeters. 2. Tolerance are 0.25mm unless otherwise noted. DP2 1.5 4.6 Pin Connection (Common Anode) Pin Connection (Common Cathode) PIN No Connection PIN No Connection 1 CATHODE G 1 ANODE G 2 CATHODE DP2,DP4 2 ANODE DP2,DP4 3 CATHODE A 3 ANODE A 4 CATHODE F 4 ANODE F 5 COMMON ANODE DIG2 5 COMMON CATHODE DIG2 6 CATHODE D 6 ANODE D 7 CATHODE E 7 ANODE E 8 CATHODE C 8 ANODE C 9 CATHODE B 9 ANODE B 10 COMMON ANODE DIG1 10 COMMON CATHODE DIG 1 11 CATHODE DP1,DP3 11 ANODE DP1,DP3 Internal Circuit Diagram (Common Cathode) Internal Circuit Diagram (Common Anode) DIG1 10 A B 3 C 9 E D 8 6 A G DP1 DP2 F 7 DIG1 10 DIG2 5 4 1 11 B C D E F G DP1 DP2 A B 3 2 C 9 E D 8 6 DIG2 5 7 A G DP1 DP2 F 4 1 11 B C D E 2 Absolute Maximum Ratings @ TA=25°  Parameter Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linear From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C F G DP1 DP2 Electrical / Optical Characteristics @ TA=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 3.4 6 - mcd IF = 10mA Emissions Wavelength lp/ld - 572/571 - nm IF = 20mA Spectral Line Half-Width Dl - 20 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 3.4 8.0 - mcd IF = 10mA Emissions Wavelength lp/ld - 591/589 - nm IF = 20mA Spectral Line Half-Width Dl - 15 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 3.4 7.5 - mcd IF = 10mA Emissions Wavelength lp/ld - 632/624 - nm IF = 20mA Spectral Line Half-Width Dl - 20 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.0 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 3.4 8.5 - mcd IF = 10mA Emissions Wavelength lp/ld - 611/605 - nm IF = 20mA Spectral Line Half-Width Dl - 20 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - 2:1 - IF = 10mA Yellow Red Orange  - Typical Electrical / Optical characteristic curves @ TA=25�� °C Green G 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10MA) RELATIVE LUMINOUS INTENSITY 1.0 . 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 Figure 1. Relative Luminous Intensity vs. Wavelength 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 1 0 5 10 40 G . 20 10 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature  2 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current 40 0 3 0 700 G 90 100 110 G 30 20 10 0 1.2 1.6 2.0 2.4 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 2.8 3.2 Yellow 4 RELATIVE INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE INTENSITY 1.0 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 0 5 10 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 40 20 10 0 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE(°C) Figure 3. Allowable DC Current vs. Ambient Temperature  1 Figure 2. Relative Intensity vs. Forward Current 40 0 2 0 700 Figure 1. Relative Intensity vs. Wavelength 3 90 100 110 30 20 10 0 1.0 1.5 2.0 2.5 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 3.0 3.5 Red R 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE LUMINOUS INTENSITY 1.0 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 Figure 1. Relative Luminous Intensity vs. Wavelength 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 1 0 5 10 R 20 10 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 R 40 Figure 3. Allowable DC Current vs. Ambient Temperature  2 Figure 2. Relative Luminous Intensity vs. Forward Current 40 0 3 0 700 R 90 100 110 30 20 10 0 1.2 1.6 2.0 2.4 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 2.8 3.2 Orange 4 RELATIVE INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE INTENSITY 1.0 0.5 0 450 500 550 600 650 WAVELENGTH(nm) 700 0 5 10 15 20 25 30 FORWARD CURRENT IF(mA) 35 40 45 50 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 40 30 20 10 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature  1 Figure 2. Relative Intensity vs. Forward Current 40 0 2 0 750 Figure 1. Relative Intensity vs. Wavelength 3 90 100 105 30 20 10 0 1.0 1.5 2.0 2.5 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 3.0 3.5 Intensity Bin Limits (mcd) Yellow / Red / Orange Green IV Bin Category Min. Max. IV Bin Category Min. Max. L 3.401 5.400 L 3.401 5.400 M 5.401 8.600 M 5.401 8.600 N 8.601 13.700 Tolerance: ±15% Tolerance: ±15% Notes: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. Recommended soldering pattern (unit: mm) SMT Soldering Profile Pb free reflow soldering Profile 2.2 6 °C/SEC. MAX. 150 °C 3 °C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Notes: Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between the first and than second soldering process.  10.50 217 °C 200 °C 255 - 260 °C 3 °C/SEC. MAX. 3.00 TEMPERATURE 10 to 30 SEC. 2.54 X 5 = 12.70 24.00 ± 0.1 2.0 ± 0.1 4.0 ± 0.1 12.4 ± 0.1 A 0.35 ± 0.05 R0.75 A 0.2 ± 0.05 1.75 ± 0.1 32.00 ± 0.3 15.60 ± 0.1 14.25 ± 0.1 Tape specification (unit: mm) For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2008 Avago Technologies Limited. All rights reserved. AV02-0981EN - February 13, 2008 4.35 ± 0.1 SECTION A - A