HDSM-443H

HDSM-441x/443x 0.39” (10.0mm) Dual digit surface mount LED display Data Sheet Description Features The HDSM-441x/443x is a dual digit display of 0.39” (10.0mm) height. This device utilizes AlInGaP / GaAs chips and has a grey top surface with white segments. • 0.39” digit height • Low current operation • Excellent characters appearance • Available in CA and CC • 500 pieces per reel • Moisture sensitivity level: Level 4 • RoHS compliant Red Green Yellow Orange Description HDSM-441C HDSM-441H HDSM-441F HDSM-441L Common Anode, Right Hand Decimal HDSM-443C HDSM-443H HDSM-443F HDSM-443L Common Cathode, Right Hand Decimal Package Dimensions Note: 1. All dimensions are in millimeters. 2. Tolerance are +/- 0.25mm unless otherwise specified. Pin Connection (Common Anode) Pin Connection (Common Cathode) PIN No Connection PIN No Connection 1 CATHODE G 1 ANODE G 2 CATHODE DP 2 ANODE DP2 3 CATHODE A 3 ANODE A 4 CATHODE F 4 ANODE F 5 COMMON ANODE DIG2 5 COMMON CATHODE DIG2 6 CATHODE D 6 ANODE D 7 CATHODE E 7 ANODE E 8 CATHODE C 8 ANODE C 9 CATHODE B 9 ANODE B COMMON ANODE DIG1 10 COMMON CATHODE DIG 1 10 Internal Circuit Diagram (Common Cathode) Internal Circuit Diagram (Common Anode) A B 3 C 9 E D 8 6 A G DP F 7 DIG1 10 DIG2 : 5 DIG1 : 10 4 1 B C D E F G DP A B 3 2 C 9 E D 8 6 DIG2 5 7 A G DP F 4 1 B C D E 2 Absolute Maximum Ratings @ TA=25°  Parameter Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linear From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C F G DP Electrical / Optical Characteristics @ TA=25°C Green Parameters Symbol Min Typ Max Average Luminous Intensity Emissions Wavelength Spectral Line Half-Width Unit Test Condition IV 5.4 9 lp/ld - 572/571 - mcd IF = 10mA - nm IF = 20mA Dl - 20 - nm IF = 20mA 2.1 2.6 V IF = 20mA 100 mA VR = 5V Forward Voltage, Per Segment VF - Reverse Current, Per Segment IR - Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 15 - mcd IF = 10mA Emissions Wavelength lp/ld - 591/589 - nm IF = 20mA Yellow Spectral Line Half-Width Dl - 15 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 14.3 - mcd IF = 10mA Emissions Wavelength lp/ld - 644/630 - nm IF = 20mA Spectral Line Half-Width Dl - 20 - nm IF = 20mA 2.0 2.6 V IF = 20mA 100 mA VR = 5V Red Forward Voltage, Per Segment VF - Reverse Current, Per Segment IR - Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 16 - mcd IF = 10mA Emissions Wavelength lp/ld - 611/605 - nm IF = 20mA Spectral Line Half-Width Dl - 17 - nm IF = 20mA 2.1 2.6 V IF = 20mA 100 mA VR = 5V 2:1 - IF = 10mA Orange  Forward Voltage, Per Segment VF - Reverse Current, Per Segment IR - Luminous Intensity Matching Ratio IV-M - - Typical Electrical / Optical characteristic curves @ TA=25�� °C Green G 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10MA) RELATIVE LUMINOUS INTENSITY 1.0 . 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 Figure 1. Relative Luminous Intensity vs. Wavelength 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 1 0 5 10 40 G . 20 10 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature  2 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current 40 0 3 0 700 G 90 100 110 G 30 20 10 0 1.2 1.6 2.0 2.4 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 2.8 3.2 Yellow 4 RELATIVE INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE INTENSITY 1.0 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 0 5 10 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 40 20 10 0 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE(°C) Figure 3. Allowable DC Current vs. Ambient Temperature  1 Figure 2. Relative Intensity vs. Forward Current 40 0 2 0 700 Figure 1. Relative Intensity vs. Wavelength 3 90 100 110 30 20 10 0 1.0 1.5 2.0 2.5 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 3.0 3.5 Red R 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE LUMINOUS INTENSITY 1.0 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 Figure 1. Relative Luminous Intensity vs. Wavelength 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 1 0 5 10 R 20 10 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 R 40 Figure 3. Allowable DC Current vs. Ambient Temperature  2 Figure 2. Relative Luminous Intensity vs. Forward Current 40 0 3 0 700 R 90 100 110 30 20 10 0 1.2 1.6 2.0 2.4 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 2.8 3.2 Orange 4 RELATIVE INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE INTENSITY 1.0 0.5 0 450 500 550 600 650 WAVELENGTH(nm) 700 0 5 10 15 20 25 30 FORWARD CURRENT IF(mA) 35 40 45 50 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 40 30 20 10 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature  1 Figure 2. Relative Intensity vs. Forward Current 40 0 2 0 750 Figure 1. Relative Intensity vs. Wavelength 3 90 100 105 30 20 10 0 1.0 1.5 2.0 2.5 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 3.0 3.5 Intensity Bin Limits (mcd) Green Orange IV Bin Category Min. Max. IV Bin Category Min. Max. M 5.401 8.600 N 8.601 13.7 N 8.601 13.700 P 13.701 21.8 P 13.701 21.8 Q 21.801 34.7 R 34.701 55.2 Tolerance: ±15% Tolerance: ±15% Yellow / Red IV Bin Category Min. Max. N 8.601 13.700 P 13.701 21.800 Q 21.801 34.7 Notes: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. Tolerance: ±15% Recommended soldering pattern (unit: mm) SMT Soldering Profile Pb free reflow soldering Profile 2.54 X 4 = 10.16 TEMPERATURE 10 to 30 SEC. 217 °C 200 °C 255 - 260 °C 3 °C/SEC. MAX. 6 °C/SEC. MAX. 150 °C 3 °C/SEC. MAX. 15.00 100 SEC. MAX. 60 - 120 SEC. TIME 2.20 (Acc. to J-STD-020C) Notes: Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between the first and than second soldering process.  3.00 1.75 ± 0.1 Tape specification (unit: mm) 4 ± 0.1 B 0.35 ± 0.05 20 ± 0.1 14.2 ± 0.1 32 +0.3 -0.3 2 ± 0.1 4.1 ± 0.1 24 ± 0.1 A A 15.3 ± 0.1 B SECTION B - B R 0.75 0.2 ± 0.05 SECTION A - A For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved. AV02-0982EN - July 9, 2008