HDSM-531H

HDSM-531x/533x 0.56” (14.22mm) Single digit surface mount LED display Data Sheet Description Features This is 0.56” (14.22mm) height single digit display. This device utilizes AlInGaP / GaAs chip.This device is with top surface gray and white segments. • 0.56” digit height • Low current operation • Excellent characters appearance • Available in CA and CC • 1000 pieces per reel • Moisture Sensitivity Level: Level 4 • RoHS compliant Ordering Information Red Green Yellow Orange Description HDSM-531C HDSM-531H HDSM-531F HDSM-531L Common Anode, Right Hand Decimal HDSM-533C HDSM-533H HDSM-533F HDSM-533L Common Cathode, Right Hand Decimal Package Dimensions Notes: All dimensions are in millimeters (inches). Tolerance: ± 0.25mm (0.01”) unless otherwise noted. Pin Connection (Common Anode) Pin Connection (Common Cathode) PIN No Connection PIN No Connection 1 Cathode E 1 Anode E 2 Cathode D 2 Anode D 3 Common Anode 3 Common Cathode 4 Cathode C 4 Anode C 5 Cathode DP 5 Anode DP 6 Cathode B 6 Anode B 7 Cathode A 7 Anode A 8 Common Anode 8 Common Cathode 9 Cathode F 9 Anode F 10 Cathode G 10 Anode G Internal Circuit Diagram (Common Anode) Internal Circuit Diagram (Common Cathode) 3.8 A B 7 C 6 D 4 3.8 E 2 F 1 G 9 10 A DP 5 B 7 C 6 D 4 E 2 F 1 G 9 DP 10 5 Absolute Maximum Ratings @ TA=25°  Parameter Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linear From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C Electrical / Optical Characteristics @ TA=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 6 10.5 - Mcd IF = 10mA Emissions Wavelength lp/ld - 572/571 - Nm IF = 20mA Spectral Line Half-Width Dl - 20 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 9 20 - Mcd IF = 10mA Emissions Wavelength lp/ld - 591/589 - Nm IF = 20mA Spectral Line Half-Width Dl - 15 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 9 16 - Mcd IF = 10mA Emissions Wavelength lp/ld - 632/624 - Nm IF = 20mA Spectral Line Half-Width Dl - 20 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.0 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 9 19.5 - Mcd IF = 10mA Emissions Wavelength lp/ld - 611/605 - Nm IF = 20mA Spectral Line Half-Width Dl - 17 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - 2:1 - IF = 10mA Yellow Red Orange  - Typical Electrical / Optical characteristic curves @ TA=25�� °C Green G 4 Relative Luminous Intensity (Normalized to 1 at 10mA) Relative Luminous Intensity 1.0 0.5 3 2 1 0 0 400 450 500 550 600 650 G 700 0 5 10 Wavelength(nm) Forward Current IF(mA) 40 30 25 30 35 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current 40 Forward Current IF(mA) 20 Forward Current IF(mA) Figure 1. Relative Luminous Intensity vs. Wavelength . G 20 10 G 30 20 10 0 0 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature(°C) Figure 3. Allowable DC Current vs. Ambient Temperature  15 110 1.2 1.6 2.0 2.4 Forward Voltage(V) Figure 4. Forward Current vs. Forward Voltage 2.8 3.2 Yellow 4 Relative Intensity (Normalized to 1 at 10mA) Relative Intensity 1.0 0.5 3 2 1 0 0 400 450 500 550 600 650 700 0 5 10 Wavelength(nm) 30 35 40 45 50 40 40 30 30 Forward ForwardCurrent CurrentIFIF(mA) (mA) Forward ForwardCurrent CurrentIFIF(mA) (mA) 25 Figure 2. Relative Intensity vs. Forward Current 40 40 20 20 10 10 30 30 20 20 10 10 00 00 10 20 20 10 30 30 40 40 50 50 60 60 70 70 80 80 90 100 100 90 Ambient Temperature(°C) Temperature(°C) Ambient Figure 3. Allowable DC Current vs. Ambient Temperature  20 Forward Current IF(mA) Figure 1. Relative Intensity vs. Wavelength 00 15 110 110 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 Forward Voltage(V) Voltage(V) Forward Figure 4. Forward Current vs. Forward Voltage 3.0 3.0 3.5 3.5 Red R 4 Relative Luminous Intensity (Normalized to 1 at 10mA) Relative Luminous Intensity 1.0 0.5 0 3 2 1 0 400 450 500 550 600 650 700 R 0 5 10 Wavelength(nm) 40 Forward Current IF(mA) Forward Current IF(mA) 25 30 35 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current 40 R 20 10 R 30 20 10 0 0 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature(°C) Figure 3. Allowable DC Current vs. Ambient Temperature  20 Forward Current IF(mA) Figure 1. Relative Luminous Intensity vs. Wavelength 30 15 110 1.2 1.6 2.0 2.4 Forward Voltage(V) Figure 4. Forward Current vs. Forward Voltage 2.8 3.2 Orange 4 Relative Intensity (Normalized to 1 at 10mA) Relative Intensity 1.0 0.5 3 2 1 0 0 450 500 550 600 650 700 750 0 5 10 Wavelength(nm) 25 30 35 40 45 50 Figure 2. Relative Intensity vs. Forward Current 40 40 Forward Current IF(mA) Forward Current IF(mA) 20 Forward Current IF(mA) Figure 1. Relative Intensity vs. Wavelength 30 20 10 30 20 10 0 0 0 10 20 30 40 50 60 70 80 Ambient Temperature(°C) Figure 3. Allowable DC Current vs. Ambient Temperature  15 90 100 110 1.0 1.5 2.0 2.5 Forward Voltage(V) Figure 4. Forward Current vs. Forward Voltage 3.0 3.5 Intensity Bin Limits (mcd) Red Green IV Bin Category Min. Max. IV Bin Category Min. Max. M 5.401 8.6 N 8.601 13.7 N 8.601 13.7 P 13.701 21.80 Tolerance: ±15% Tolerance: ±15% Yellow Orange IV Bin Category Min. Max. IV Bin Category Min. Max. N 8.601 13.7 N 8.601 13.7 P 13.701 21.80 P 13.701 21.8 Q 21.801 34.7 Q 21.801 34.7 Tolerance: ±15% Tolerance: ±15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. SMT Soldering Profile Recommended soldering pattern (unit: mm) Pb free reflow soldering Profile 19.0 3.0 2.0 Notes: Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between the first and than second soldering process. 2.45 x 4 = 9.80  Tape specification (unit: mm) For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved. AV02-0713EN - September 9, 2008