HDSP-301E

HDSP-301x/303x Series HDSP-561x/563x Series 10 mm and 13 mm Slim Font Seven Segment Displays Data Sheet Description Features These slim font seven segment displays incorporate a new slim font character design. This slim font features narrow width, specially mitered segments to give a fuller appearance to the illuminated character. Faces of these displays are painted a neutral gray for enhanced on/off contrast. • Excellent appearance All devices are available in either common anode or common cathode configuration with right hand decimal point. • Choice of character size: 10 mm and 13 mm • Slim font design • Mitered corners, evenly illuminated segments • Gray face for optimum on/off contrast • Choice of colors: HER, green, yellow, and AlGaAs • Characterized for luminous intensity Devices HER HDSP- Green HDSP- Yellow HDSP- AlGaAs HDSP- Description 301E 301G 301Y 301A Common Anode, 10 mm Display 303E 303G 303Y 303A Common Cathode, 10 mm Display 561E 561G 561Y 561A Common Anode, 13 mm Display 563E 563G 563Y 563A Common Cathode, 13 mm Display Part Numbering System 5082 - x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options [1] 00: No Mechanical Option Color Bin Options [1,2] 0: No Color Bin Limitation Maximum Intensity Bin [1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color [1] A: AlGaAs Red E: High Efficiency Red G: Green Y: Yellow Device Specific Configuration [1] Refer to Respective Data Sheet Package [1] Refer to Respective Data Sheet Notes: 1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part-number. Color and Intensity Binbs are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective data sheet for specific bin limit information. 2 HDSP-301x/303x Series FRONT VIEW RIGHT SIDE 6.00 [0.236] 0.90 [0.035] 10.00 [0.394] ∅ 1.20 [0.047] LUMINOUS INTENSITY CATEGORY COLOR BIN 12.80 ± 0.25 [0.504] 2.00 [0.079] 4 x 2.54 [0.400] 0.50 ± 0.10 [0.020] 6.40 ± 0.25 [0.252] 7.00 ± 0.25 [0.276] DATE CODE TOP SIDE 10.40 MIN. [0.409] 9.70 ± 0.25 [0.382] 0.30 ± 0.10 [0.012] A 1 + 2 + F 3 + 4 + 5 + Notes: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. TOLERANCE IS 0.25 mm (0.01 INCH) UNLESS OTHERWISE STATED. + 10 + 9 G B + 8 E C D DP 7.62 ± 0.38 [0.300] 3 2.54 ± 0.38 [0.100] HDSP-XXXX YWW XZ COO 10.00° COUNTRY OF ORIGIN Pin + 7 + 6 Function 1 G 2 F 3 Common A/C 4 E 5 D 6 DP 7 C 8 Common A/C 9 B 10 A PIN 6 HDSP-561x/563x Series FRONT VIEW RIGHT SIDE 45° 7.40 (0.292) 10° 1.25 (0.049) 15.24 ± 0.3 (0.600) 17.50 ± 0.3/–0.25 (0.689) 13.00 (0.512) 0.29 ± 0.08 TYP. (0.011) 6.40 ± 0.25 (0.252) 1.25 Ø (0.049) 3.60 ± 0.3 (0.142) 7.00 ± 0.25 (0.276) TOP SIDE 12.25 ± 0.25 (0.482) 10 8 9 6 7 a f b g 3.59 ± 0.3 TYP. (0.141) 0.58 ± 0.08 (0.023) e c 2.54 ± 0.3 TYP. (0.100) 1 Notes: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. TOLERANCE IS 0.25 mm (0.01 INCH) UNLESS OTHERWISE STATED. 4 DP d 2 Pin 3 4 5 Function 1 E 2 D 3 Common A/C 4 C 5 DP 6 B 7 A 8 Common A/C 9 F 10 G Absolute Maximum Ratings Description HER Green Yellow AlGaAs Units Average Power per Segment or DP 105 105 105 37 mW Peak Forward Current per Segment or DP 90 90 90 45 mA DC Forward Current per Segment or DP 30 30 30 15 mA Operating Temperature Range –40 to +80 –40 to +80 –40 to +80 –20 to +80 ˚C Storage Temperature Range –40 to +80 –40 to +80 –40 to +80 –40 to +80 ˚C 5 5 5 5 V 250 250 250 250 ˚C Reverse Voltage per Segment or DP Wavesoldering Temperature for 3 Seconds 1.59 mm below body Notes: 1. Derate above 33˚C at 0.34 mA/˚C for HER. 2. Derate above 27˚C at 0.32 mA/˚C for Green. 3. Derate above 30˚C at 0.33 mA/˚C for Yellow. 4. Derate above 60˚C at 0.25 mA/˚C for AlGaAs. Electrical/Optical Characteristics at TA = 25˚C HER Device Series HDSP-301/303E Parameter Symbol Min. Typ. Luminous Intensity/Segment (Digit Average) IV 1.100 1.800 Forward Voltage/Segment or DP VF 1.90 Peak Wavelength λPEAK Dominant Wavelength λd Reverse Current IR Thermal Resistance LED Junction-to-Pin RθJ–PIN Max. Units Test Conditions mcd IF = 10 mA V IF = 20 mA 635 nm IF = 20 mA 625 nm IF = 20 mA µA VR = 5 V 2.50 100 351.5 ˚C/W/Seg. HER Device Series HDSP-561/563E Parameter Symbol Min. Typ. Luminous Intensity/Segment (Digit Average) IV 1.100 1.800 Forward Voltage/Segment or DP VF 1.90 Peak Wavelength λPEAK Dominant Wavelength λd Reverse Current IR Thermal Resistance LED Junction-to-Pin RθJ–PIN 5 Max. Units Test Conditions mcd IF = 10 mA V IF = 20 mA 635 nm IF = 20 mA 625 nm IF = 20 mA µA VR = 5 V 2.50 100 351.5 ˚C/W/Seg. Electrical/Optical Characteristics at TA = 25˚C (Cont.) Green Device Series HDSP-301/303G Parameter Symbol Min. Typ. Luminous Intensity/Segment (digit average) IV 1.800 2.800 Forward Voltage/Segment VF 2.25 Peak Wavelength λPEAK Dominant Wavelength λd Reverse Current IR Thermal Resistance LED Junction-to-Pin RθJ–PIN Max. Units Test Conditions mcd IF = 10 mA V IF = 20 mA or DP 568 nm IF = 20 mA 573 nm IF = 20 mA µA VR = 5 V 2.50 100 351.5 ˚C/W/Seg. Green Device Series HDSP-561/563G Parameter Symbol Min. Typ. Luminous Intensity/Segment (Digit Average) IV 1.800 2.800 Forward Voltage/Segment or DP VF 2.25 Peak Wavelength λPEAK 568 Dominant Wavelength λd 573 Reverse Current IR Thermal Resistance LED Junction-to-Pin RθJ–PIN Max. 2.50 100 351.5 Units Test Conditions mcd IF = 10 mA V IF = 20 mA nm IF = 20 mA nm IF = 20 mA µA VR = 5 V ˚C/W/Seg. Yellow Device Series HDSP-301/303Y Parameter Symbol Min. Typ. Luminous Intensity/Segment (Digit Average) IV 1.100 1.800 Forward Voltage/Segment or DP VF 2.15 Peak Wavelength λPEAK 589 Dominant Wavelength λd 590 Reverse Current IR Thermal Resistance LED Junction-to-Pin RθJ–PIN 6 Max. 2.50 100 351.5 Units Test Conditions mcd IF = 10 mA V IF = 20 mA nm IF = 20 mA nm IF = 20 mA µA VR = 5 V ˚C/W/Seg. Electrical/Optical Characteristics at TA = 25˚C (Cont.) Yellow Device Series HDSP-561/563Y Parameter Symbol Min. Typ. Luminous Intensity/Segment (Digit Average) IV 1.800 2.800 Forward Voltage/Segment or DP VF 2.15 Peak Wavelength λPEAK 589 Dominant Wavelength λd 590 Reverse Current IR Thermal Resistance LED Junction-to-Pin RθJ–PIN Max. 2.50 100 351.5 Units Test Conditions mcd IF = 10 mA V IF = 20 mA nm IF = 20 mA nm IF = 20 mA µA VR = 5 V ˚C/W/Seg. Notes: 1. Typical specification for reference only. Do not exceed absolute maximum ratings. 2. The dominant wavelength, λ, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. AlGaAs Device Series HDSP-301/303A Parameter Symbol Min. Typ. Luminous Intensity/Segment (Digit Average) IV 0.280 0.450 Forward Voltage/Segment or DP VF 1.80 Peak Wavelength λPEAK 660 Dominant Wavelength λd 643 Reverse Current IR Thermal Resistance LED Junction-to-Pin RθJ–PIN Max. 2.20 100 351.5 Units Test Conditions mcd IF = 1 mA V IF = 20 mA nm IF = 20 mA nm IF = 20 mA µA VR = 5 V ˚C/W/Seg. AlGaAs Device Series HDSP-561/563A Parameter Symbol Min. Typ. Luminous Intensity/Segment (Digit Average) IV 0.280 0.450 Forward Voltage/Segment or DP VF 1.80 Peak Wavelength λPEAK 660 Dominant Wavelength λd 643 Reverse Current IR Thermal Resistance LED Junction-to-Pin RθJ–PIN Max. 2.20 100 351.5 Units Test Conditions mcd IF = 1 mA V IF = 20 mA nm IF = 20 mA nm IF = 20 mA µA VR = 5 V ˚C/W/Seg. Notes: 1. Typical specification for reference only. Do not exceed absolute maximum ratings. 2. The dominant wavelength, λ, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 7 Intensity Bin Limits (mcd) Color Categories Green HDSP-301G/303G/561G/563G Dominant Wavelength (nm) IV Bin Category Min. Max. K 1.800 3.600 L 2.800 5.600 Yellow HDSP-301Y/303Y IV Bin Category Min. Max. I 1.100 2.200 K 1.800 3.600 IV Bin Category Min. Max. K 1.800 3.600 L 2.800 5.600 IV Bin Category Min. Max. I 1.100 2.200 K 1.800 3.600 Yellow HDSP-561Y/563Y HER HDSP-301E/303E AlGaAs Red HDSP-301A/303A/561A/563A IV Bin Category Min. Max. F 0.280 0.560 G 0.450 0.900 IV Bin Category Min. Max. K 2.001 3.2 L 3.201 5.05 HER HDSP-561E/563E Note: Tolerance is ± 10% 8 Color Bin Min. Max. Green 3 570.00 574.50 4 567.00 571.50 2 586.50 590.00 3 584.00 587.50 Yellow Note: 1. All categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representatives for further clarification/information. HDSP-561x/563x Series 45 IDC – MAXIMUM DC CURRENT PER SEGMENT – mA IDC – MAXIMUM DC CURRENT PER SEGMENT – mA HDSP-301x/303x Series RθJ = 770°C/W 40 35 HER 30 YELLOW 25 GREEN 20 15 AlGaAs 10 5 0 0 10 30 40 50 60 70 80 90 100 110 120 TA – AMBIENT TEMPERATURE – °C 20 Figure 1. Maximum allowable DC current vs. ambient temperature. RθJ = 770°C/W 40 35 HER 30 YELLOW 25 GREEN 20 15 AlGaAs 10 5 0 0 IF – FORWARD CURRENT PER SEGMENT – mA 100 AlGaAs 80 HER 60 GREEN 40 20 0 0.0 1.0 2.0 3.0 VF – FORWARD VOLTAGE – V 4.0 5.0 YELLOW 100 AlGaAs 80 GREEN 40 20 0 0.0 1.0 2.0 3.0 VF – FORWARD VOLTAGE – V 4.0 5.0 Figure 5. Forward current vs. forward voltage. 12 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 5 mA FOR HER AND YELLOW AND TO 1 AT 10 mA FOR GREEN) 10 8 YELLOW 6 HER 4 AlGaAs 2 0 HER 60 12 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 5 mA FOR HER AND YELLOW AND TO 1 AT 10 mA FOR GREEN) 30 40 50 60 70 80 90 100 110 120 TA – AMBIENT TEMPERATURE – °C 20 120 YELLOW Figure 2. Forward current vs. forward voltage. GREEN 0 5 10 15 20 25 30 IF – DC FORWARD CURRENT – mA Figure 3. Relative luminous intensity vs. DC forward current. 9 10 Figure 4. Maximum allowable DC current vs. ambient temperature. 120 IF – FORWARD CURRENT PER SEGMENT – mA 45 35 40 10 8 YELLOW HER 6 4 AlGaAs 2 0 GREEN 0 5 10 15 20 25 30 IF – DC FORWARD CURRENT – mA Figure 6. Relative luminous intensity vs. DC forward current. 35 40 Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2014 Avago Technologies. All rights reserved. Obsoletes 5989-2834EN AV02-0625EN - June 23, 2014