HDSP-433G

HDSP-431G/433G 10 mm Three Digit Slim Font with 2 Colons Seven-Segment Displays Data Sheet Description Features The 10 mm (0.4 inch) Three Digit Slim Font with 2-Colons Seven Segment Displays incorporates a new slim font character design. This slim font features narrow width, specially mitered segments to give a fuller appearance to the illuminated character. Faces of these displays are painted a neutral gray for enhanced on/off contrast.  All devices are available in either common anode or common cathode configuration with tinted green segments.       Devices Green Description HDSP-431G 3 Digit, Common Anode, Untinted-Diffused, 0.4" Display HDSP-433G 3 Digit, Common Cathode, Untinted-Diffused, 0.4" Display Avago Technologies -1- Excellent appearance Slim font design Mitered corners, evenly illuminated segments Gray face for optimum on/off contrast Choice of colors: green Choice of character size: 10 mm (0.4 inch) Characterized for luminous intensity HDSP-431G/433G Data Sheet Part Numbering System Part Numbering System 5082 - x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options1 00: No Mechanical Option Color Bin Options1, 2 0: No Color Bin Limitation Maximum Intensity Bin1, 2 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin1, 2 0: No Minimum Intensity Bin Limitation Device Configuration/Color1 G: Green Device Specific Configuration1 Refer to Respective Data Sheet Package1 Refer to Respective Data Sheet NOTE 1. 2. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Avago representative for details. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective data sheet for specific bin limit information. Avago Technologies -2- HDSP-431G/433G Data Sheet Package Dimensions Package Dimensions FRONT VIEW 10.00° RIGHT SIDE 6.00 (0.236) 3.90 ± 0.50 (0.154) PIN 15 10.00 (0.394) F 10.16 (0.400) 12.80 (0.504) DIGIT 1 A G B E L1 L2 DP1 10.16 (0.400) x 2 (0.800) BOTTOM SIDE 30.02 (1.182) TOP SIDE 6.00 (0.236) HDSP-XXXX YWW XZ COO DATE CODE LUMINOUS INTENSITY CATEGORY 7.00 (0.276) COUNTRY OF ORIGIN 2.54 x 7 (0.700) 0.45 (0.018) COLOR BIN NOTE 1. All dimensions are in millimeters (inches). 2. Unless otherwise stated, tolerances are ± 0.25 mm. Avago Technologies -3- DIGIT 3 L3 C D 6 – O 1.20 (0.047) DIGIT 2 DP2 DP3 HDSP-431G/433G Data Sheet Pin Information Pin Information Pin Function 1 Digit 1 Common A/C 2 E 3 C 4 D 5 Digit 2 Common A/C 6 DP 7 Digit 3 Common A/C 8 G 9 No pin 10 No pin 11 B 12 A 13 No pin 14 L1, L2, and L3 Common A/C 15 F Avago Technologies -4- HDSP-431G/433G Data Sheet Internal Circuit Diagram (Common Cathode): HDSP-433G Internal Circuit Diagram (Common Cathode): HDSP-433G 1 COM 5 COM 14 DIGIT 1 DIGIT 2 L1 A 12 B 11 C 3 D 4 E 2 F 15 7 COM G 8 L2 DIGIT 3 L3 DP 6 Internal Circuit Diagram (Common Anode): HDSP-431G 1 COM 5 COM 14 DIGIT 1 DIGIT 2 L1 A 12 B 11 C 3 D 4 E 2 F 15 7 COM G 8 L2 DIGIT 3 L3 DP 6 Absolute Maximum Ratings Description Green Units Average Power per Segment or DP 65 mW Peak Forward Current per Segment or DP 100 mA DC Forward Current per Segment or DP1 25 mA Operating Temperature Range –40 to +105 °C Storage Temperature Range –40 to +105 °C Reverse Voltage per Segment or DP 3 V Wave Soldering Temperature for 3 Seconds 1.59 mm below Body 250 °C NOTE 1. Derate above 40 °C at 33 mA/°C for Green. Avago Technologies -5- HDSP-431G/433G Data Sheet Intensity Bin Limits (mcd) Green Electrical/Optical Characteristics at TA = 25 °C Device Series Parameter Symbol Min. Typ. HDSP-431G/ HDSP-433G Luminous Intensity/ Segment (Digit Average) IV 3.200 5.000 Forward Voltage/ Segment or DP VF 2.25 Peak Wavelength PEAK Dominant Wavelength d Reverse Current IR Max. Units Test Conditions mcd IF = 10 mA V IF = 20 mA 568 nm IF = 20 mA 573 nm IF = 20 mA μA VR = 5 V 2.50 100 NOTE 1. 2. Typical specification for reference only. Do not exceed absolute maximum ratings. The dominant wavelength, , is derived from the CIE chromaticity diagram and is that single wavelength that defines the color of the device. Intensity Bin Limits (mcd) Green Green HDSP-431G/433G IV Bin Category Min. Max. L 3.200 5.050 M 5.051 8.000 Color Categories Dominant Wavelength (nm) Color Green NOTE Bin Min. Max. 3 570.0 574.0 4 567.0 571.0 All categories are established for classification of products. Products may not be available in all categories. Contact your Avago representative for further clarification and information. Avago Technologies -6- HDSP-431G/433G Data Sheet Contrast Enhancement Figure 2 Forward Current vs. Forward Voltage 100 35 90 30 Rθ J-A = 770°C/W 25 20 15 GREEN 10 5 0 20 30 40 50 60 70 80 90 100 110 120 TA – AMBIENT TEMPERATURE – °C Figure 3 Relative Luminous Intensity vs. DC Forward Current 8 80 70 60 50 40 30 GREEN 20 10 0 0 1 2 3 4 5 VF – FORWARD VOLTAGE – V Contrast Enhancement For information on contrast enhancement, refer to Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, refer to Application Note 1027. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago Technologies and the A logo are trademarks of Avago Technologies in the United States and other countries. All other brand and product names may be trademarks of their respective companies. Data subject to change. Copyright © 2013–2016 Avago Technologies. All Rights Reserved. AV02-0130EN – March 31, 2016 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA FORGREEN) 40 IF – FORWARD CURRENT PERSEGMENT – mA IDC – MAXIMUM DC CURRENT PERSEGMENT – mA Figure 1 Maximum Allowable DC Current vs. Ambient Temperature 6 4 2 GREEN 0 0 5 10 15 20 25 IF – DC FORWARD CURRENT – mA 30