HDSP-701E

HDSP-70xE 17.3 mm (0.68 inch) General Purpose 5x7 Dot Matrix Alphanumeric Displays Data Sheet HDSP-70xE Series, HDSP-71xE Series HDSP-70xG Series, HDSP-71xG Series HDSP-70xA Series, HDSP-71xA Series Description Features These displays have a 17.3 mm (0.68 inch) character height and use industry standard size and pin-out. The devices are available in either common row anode or common row cathode configurations. The displays come in either gray or black face paint and are available in a choice of high efficiency red (HER) or green colors or AlGaAs. • 5 x 7 dot matrix font • Viewable up to 12 meters • X-Y stackable • Industry standard pin-out - 7.6 mm (0.3 in.) Dual-in-Line (DIP) leads on 2.54 mm (0.1 in.) centers • Choice of colors - Red or Green or AlGaAs • Choice of face paint colors - Gray or black • Design flexibility - Common row anode or common row cathode • Categorized for luminous intensity • Green categorized for color Applications • Suitable for indoor use • Not recommended for industrial applications, i.e., operating temperature requirements exceeding 85°C or Below -40°C [1] • Extreme temperature cycling not recommended [2] Devices HER HDSP- Green HDSP- AlGaAs HDSP- Description 701E 701G 701A 17.3 mm Gray Surface Common Row Anode 703E 703G 703A 17.3 mm Gray Surface Common Row Cathode 711E 711G 711A 17.3 mm Black Surface Common Row Anode 713E 713G 713A 17.3 mm Black Surface Common Row Cathode Notes: 1. For details, please contact your local Avago components sales office or an authorized distributor. Package Dimensions 12.7 (0.50) MAX. 6.3 (0.25) 10.16 (0.40) 1.3 (0.05) 2.54 (0.10) PIN 1 2.54 (0.10) 17.78 MAX. (0.70) 12.7 (0.50) 15.24 (0.600) 2.54 (0.10) PIN 6 PART NO. COL 1 2 3 4 35 – ∅ 1.9 (0.075) 5 ROW 1 8 – 21.8 ° 2 8 – 3 (0.118) 8 – 2.5 (0.098) 3 4 5.1 ± 0.5 (0.201) 12 – ∅ 0.5 (0.02) 5 6 7 7.62 (0.03) NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCE IS ± 0.25 mm (0.010). 3. FOR GREEN ONLY. 2 Internal Circuit Diagram COMMON ANODE ROW COMMON CATHODE ROW COLUMN ROW COMMON ROW ANODE HDSP-701E/711E/ PIN 701G/711G/701A/711A COLUMN 1 2 3 4 5 1 2 3 4 5 1 3 10 7 8 4 3 7 9 12 ROW COMMON ROW CATHODE HDSP-703E/713E/ PIN 703G/713G/703A/713A 1 2 COLUMN 1 CATHODE ROW 3 ANODE 1 2 ROW 1 CATHODE ROW 2 CATHODE 1 12 1 1 3 4 COLUMN 2 CATHODE ROW 5 ANODE 3 4 COLUMN 2 ANODE COLUMN 1 ANODE 2 11 2 2 3 2 3 11 5 6 7 ROW 6 ANODE ROW 7 ANODE COLUMN 4 CATHODE 5 6 7 ROW 6 CATHODE ROW 7 CATHODE COLUMN 3 ANODE 4 9 4 10 5 4 5 8 8 9 COLUMN 5 CATHODE ROW 4 ANODE 8 9 ROW 5 CATHODE COLUMN 4 ANODE 6 5 6 5 7 6 7 6 10 11 12 COLUMN 3 CATHODE ROW 2 ANODE ROW 1 ANODE 10 11 12 ROW 4 CATHODE ROW 3 CATHODE COLUMN 5 ANODE x = ROW OR COLUMN NUMBER, x = PIN NUMBER Absolute Maximum Ratings at TA = 25°C HER HDSP-701E/ 711E/703E/ 713E AlGaAs HDSP-701A/ 703A/711A/ 713A Green HDSP-701G/ 711G/703G/ 713G Units Average Power per Dot[1] 75 75 75 mW Peak Forward Current per Dot[1,2] 90 125 90 mA Average Forward Current per Dot[1] 23 23[3] 15[2] mA Parameter (1/10 Duty Cycle, 0.1 ms Pulse Width) Reverse Voltage per Dot Not designed for reverse bias V Operating Temperature –40 to +85 –40 to +85 –40 to +85 °C Storage Temperature –40 to +85 –40 to +85 –40 to + 85 °C 250 250 250 °C Wave Soldering Temperature for 3 seconds [3] (1.6 mm [0.063 in.] below Body) Notes: 1. Do not exceed maximum average current per dot. 2. Derate above 35°C at 0.2 mA/°C. 3. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 5 seconds. 3 Optical/Electrical Characteristics at TA = 25°C High Efficiency Red Devices HDSP-701E/711E/703E/713E Parameter Symbol Min. Typ. Units Test Conditions Luminous Intensity/Dot (Digit Average)[1] IV 1.289 2.500 Max. mcd IF = 50 mA, 20% Duty Factor Peak Wavelength lPEAK 632 nm IF = 20 mA Dominant Wavelength[2] ld 622 nm IF = 20 mA Forward Voltage VF V IF = 50 mA 3.40 2.05 2.50 IF = 20 mA 1.60 Reverse Voltage[3] VR Luminous Intensity Matching Ratio IV-M IF = 5 mA 5 V 2:1 IR = 100 µA IF = 50 mA 20% Duty Factor Green Devices HDSP-701G/711G/703G/713G Parameter Symbol Min. Typ. Luminous Intensity/Dot (Digit Average)[1] IV 0.96 Peak Wavelength Dominant Wavelength[2] Forward Voltage VF Max. Units Test Conditions 2.50 mcd IF = 50 mA, 20% Duty Factor lPEAK 568 nm IF = 20 mA ld 573 nm IF = 20 mA V IF = 50 mA 3.40 1.80 2.25 2.60 IF = 20 mA 1.60 Reverse Voltage[3] VR Luminous Intensity Matching Ratio IV-M IF = 5 mA 5 V 2:1 IR = 100 µA IF = 50 mA 20% Duty Factor AlGaAs Devices HDSP-701A/711A/703A/713A Parameter Symbol Min. Typ. Luminous Intensity/Dot (Digit Average)[1] IV 1.55 Peak Wavelength Dominant Wavelength[2] Forward Voltage Max. Units Test Conditions 2.10 mcd IF = 10 mA, 20% Duty Factor lPEAK 660 nm IF = 20 mA ld 643 nm IF = 20 mA VF 1.8 V IF = 20 mA 2.0 2.0 IF = 10 mA 1.5 Reverse Voltage[3] VR Luminous Intensity Matching Ratio IV-M IF = 5 mA 5 V 1.5:1 IR = 100 µA IF = 10 mA 20% Duty Factor Notes: 1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 2. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Indicates production final test condition only. Long term reverse biasing is not recommended. 4 90 IF – FORWARD CURRENT PER SEGMENT – mA IDC – MAXIMUM DC CURRENT PER SEGMENT – mA 35 30 GREEN, HER 25 20 15 AlGaAs 10 5 0 0 20 40 60 80 100 80 AlGaAs 70 HER 60 50 40 30 20 GREEN 10 0 2 1 TA – AMBIENT TEMPERATURE – C 1.4 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 3.5 ηV – RELATIVE EFFICIENCY (NORMALIZED TO/AT 10 mA PER SEGMENT) 4.0 GREEN, HER 3.0 2.5 AlGaAs 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 IF – DC FORWARD CURRENT – mA Figure 3. Relative Luminous Intensity vs. DC Forward Current. 5 5 Figure 2. Forward Current vs. Forward Voltage. Figure 1. Maximum Allowable Average Current Per Dot vs. Ambient Temperature. 0 4 3 VF – FORWARD VOLTAGE – V 35 40 RED 1.3 GREEN 1.2 1.1 AlGaAs 1.0 0.9 0.8 0 10 20 30 40 50 60 70 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 4. Relative Efficiency (Luminous Intensity Per Unit Current Per Dot) vs. Peak Current Per Dot. 80 90 100 Intensity Bin Limits[1] (mcd at 50 mA, 20% Duty Factor) High Efficiency Red Color Bin Limits (Dominant Wavelength) Dominant Wavelength (nm) Color Bin Min. Max. Green 2 573.6 576.5 Bin name Min.[2] Max.[2] E 1.289 1.934 3 570.6 573.5 F 1.934 2.900 4 567.6 570.5 G 2.900 4.350 5 564.5 567.5 H 4.350 6.525 Bin name Min.[2] Max.[2] H 0.96 1.44 I 1.44 2.15 Contrast Enhancement J 2.15 3.23 K 3.23 4.85 For information on contrast enhancement, please see Application Note 1015. L 4.85 7.28 Green Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is ±10%. Intensity Bin Limits[1] (mcd at 10 mA, 20% Duty Factor) AlGaAs Bin name Min.[2] Max.[2] I 1.55 2.33 J 2.33 3.49 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is ±10%. For product information and a complete list of distributors, please go to our website: Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Avago representatives for further clarification/information. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloro-ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. Device Reliability For reliability information, please see the reliability datasheet 17.3 mm General Purpose 5 x 7 Dot Matrix Alphanumeric Displays. www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2015 Avago Technologies. All rights reserved. Obsoletes 5988-8400EN AV02-0450EN - October 5, 2015