HDSP-740x Series, HDSP-750x Series, HDSP-780x Series,
HDSP-A15x Series, HDSP-A40x Series
7.6 mm (0.3 inch) Micro Bright Seven Segment Displays
Data Sheet
Description
Features
The 7.6 mm (0.3 inch) LED seven segment displays
are designed for viewing distances up to 3 meters (10 feet).
These devices use an industry standard size package and
pinout. Both the numeric and ±1. overflow devices feature
a right hand decimal point. All devices are available as
either common anode or common cathode.
• Compact package
– 0.300 x 0.500 inches
– Leads on 2.54 mm (0.1 inch) centers
• Choice of colors
– AlGaAs Red, High Efficiency Red, Yellow, Green, Orange
• Excellent appearance
– Evenly lighted segments
– Mitered corners on segments
– Surface color gives optimum contrast
– ±50° viewing angle
• Design flexibility
– Common anode or common cathode
– Right hand decimal point
– ±1. Overflow Character
• Categorized for luminous intensity
– Yellow and Green categorized for color
– Use of like categories yields a uniform display
• High light output
• High peak current
• Excellent for long digit string multiplexing
• Intensity and color selection available
– See Intensity and Color Selected Displays Data Sheet
• Sunlight viewable AlGaAs
These displays are ideal for most applications. Pin-forpin equivalent displays are also available in a low current
design. The low current displays are ideal for portable
applica
tions. For additional information see the Low
Current Seven Segment Displays.
Devices
Package
Drawing
Orange
AlGaAs [1]
HER [1]
Yellow [1]
Green [1]
HDSP-A401
HDSP-A151
HDSP-7501
HDSP-7401
HDSP-7801
Common Anode Right Hand Decimal
A
HDSP-A403
HDSP-A153
HDSP-7503
HDSP-7403
HDSP-7803
Common Cathode Right Hand Decimal
C
HDSP-7507
HDSP-7807
CommonAnode ±1. Overflow
E
HDSP-7508
HDSP-7808
Common Cathode ±1. Overflow
F
Description
Note:
1. These displays are recommended for high ambient light operation. For low current operation, refer to the HDSP-A10X AlGaAs, HDSP-335X HER,
HDSP-A80X Yellow, and HDSP-A90X Green data sheet.
Part Numbering System
5082 – X XX X – X X X XX
HDSP – X XX X – X X X XX
Mechanical Option [1]
00: No Mechanical Option
Color Bin Options [1, 2]
0: No Color Bin Limitation
3: Color Bins 3- and 3+ only (applicable for Yellow devices only)
Z: Color Bins 2- and 3+ only (applicable for Yellow devices only)
Maximum Intensity Bin [1, 2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin [1, 2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color [1]
1: Common Anode
2: Common Anode
3: Common Cathode
4: Common Cathode
Device Specific Configuration [1]
Refer to Respective Datasheet
Package [1]
A: 7.6 mm (0.3 inch) Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative
for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions
may apply). Refer to respective datasheet for specific bin limit information.
2
Package Dimensions
Notes:
1. All dimensions in millimeters (inches).
2. All untoleranced dimensions are
for reference only.
3. Redundant anodes.
4. Redundant cathodes.
5. For HDSP-7400/7800 series product only.
Internal Circuit Diagram
3
FUNCTION
Pin
A
1
2
3
4
5
6
7
8
9
10
ANODE[3]
CATHODE f
CATHODE g
CATHODE e
CATHODE d
ANODE[3]
CATHODE DP
CATHODE c
CATHODE b
CATHODE a
C
CATHODE[4]
ANODE f
ANODE g
ANODE e
ANODE d
CATHODE[4]
CATHODE DP
CATHODE c
CATHODE b
CATHODE a
E
ANODE[3]
CATHODE PLUS
CATHODE MINUS
NC
NC
ANODE[3]
CATHODE DP
CATHODE c
CATHODE b
NC
F
CATHODE[5]
ANODE PLUS
ANODE MINUS
NC
NC
CATHODE[4]
ANODE DP
ANODE c
ANODE b
NC
Absolute Maximum Ratings
Description
AlGaAs Red
HDSP-A150
Series
HER/Orange
HDSP-7500/
-A40X
Series
Yellow
HDSP-7400
Series
Green
HDSP-7800
Series
Units
Average Power per Segment or DP
96
105
80
105
mW
Peak Forward Current per Segment or DP
160[1]
90[3]
60[5]
90[7]
mA
DC Forward Current per Segment or DP
40[2]
30[4]
20[6]
30[8]
mA
Operating Temperature Range
–20 to +100[9]
–40 to +100
Storage Temperature Range
°C
–55 to +100
°C
Reverse Voltage* per segment or DP
3.0
V
Wave Soldering Temperature for 3 Seconds
(1.59mm [0.063 in.] below Body)
250
°C
* reverse voltage is for LED testing purposes and is not recommended to be used as an application condition.
Notes:
1. See Figure 1 to establish pulsed conditions.
2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 6 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C.
5. See Figure 7 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 8 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C.
9. For operation below –20°C, contact your local Avago components sales office or an authorized distributor.
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device Series - HDSP-A15x
Parameter
Symbol
Min.
Typ.
Luminous Intensity/Segment[1,2,5] (Digit Average)
IV
6.9
Forward Voltage/Segment or DP
VF
Units
Test Conditions
14.0
mcd
IF = 20 mA
1.8
V
IF = 20 mA
V
IF = 100 mA
2.0
Peak Wavelength
λPEAK
Dominant Wavelength[3]
λd
Reverse Voltage/Segment or DP[4]
VR
Temperature Coefficient of VF/Segment or DP
Thermal Resistance LED Junction-to-Pin
Max.
3.0
645
nm
637
nm
15.0
V
ΔVF/°C
-2
mV/°C
RθJ-PIN
255
°C/W/Seg
3.0
IR = 100 μA
High Efficiency Red
Device Series - HDSP-750x
Parameter
Symbol
Min.
Typ.
Luminous Intensity/Segment[1,2,6]
IV
360
980
Forward Voltage/Segment or DP
VF
2.0
Peak Wavelength
λPEAK
635
nm
Dominant Wavelength[3]
λd
626
nm
Reverse Voltage/Segment or DP[4]
VR
30
V
Temperature Coefficient of VF/Segment or DP
ΔVF/°C
-2
mV/°C
Thermal Resistance LED Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
(Digit Average)
4
Max.
Units
Test Conditions
μcd
IF = 5 mA
5390
3.0
IF = 20 mA
2.5
V
IF = 20 mA
IR = 100 μA
Orange
Device Series - HDSP-A40x
Parameter
Symbol
Luminous Intensity/Segment[1,2,6]
(Digit Average)
IV
Min.
0.70
Forward Voltage/Segment or DP
VF
2.0
Peak Wavelength
λPEAK
600
nm
Dominant Wavelength[3]
λd
603
nm
Reverse Voltage/Segment or DP[4]
VR
30
V
Temperature Coefficient of VF/Segment or DP
ΔVF/°C
-2
mV/°C
Thermal Resistance LED Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
3.0
Typ.
Max.
2.5
Units
Test Conditions
mcd
IF = 5 mA
V
IF = 20 mA
IR = 100 μA
Yellow
Device Series - HDSP-740x
Parameter
Symbol
Min.
Typ.
Luminous Intensity/Segment[1,2,7]
IV
225
980
Forward Voltage/Segment or DP
VF
2.2
Peak Wavelength
λPEAK
583
Dominant Wavelength[3,9]
λd
581.5
586
Reverse Voltage/Segment or DP[4]
VR
3.0
50.0
V
Temperature Coefficient of VF/Segment or DP
ΔVF/°C
-2
mV/°C
Thermal Resistance LED Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
(Digit Average)
Max.
Units
Test Conditions
μcd
IF = 5 mA
5390
IF = 20 mA
2.5
V
IF = 20 mA
nm
592.5
nm
IR = 100 μA
High Performance Green
Device Series - HDSP-780x
Parameter
Symbol
Min.
Typ.
Luminous Intensity/Segment[1,2,8]
(Digit Average)
IV
860
3000
Max.
Units
Test Conditions
μcd
IF = 10 mA
Forward Voltage/Segment or DP
VF
2.1
Peak Wavelength
λPEAK
566
Dominant Wavelength[3,9]
λd
571
Reverse Voltage/Segment or DP[4]
VR
50.0
V
Temperature Coefficient of VF/Segment or DP
ΔVF/°C
-2
mV/°C
Thermal Resistance LED Junction-to-Pin
RθJ-PIN
200
°C/W/Seg
6800
3.0
IF = 20 mA
2.5
V
IF = 20 mA
nm
577
nm
IR = 100 μA
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation the AlGaAs HDSP-A101 series displays are recommended.
6. For low current operation the HER HDSP-7511 series displays are recommended.
7. For low current operation the Yellow HDSP-A801 series displays are recommended.
8. For low current operation the Green HDSP-A901 series displays are recommended.
9. The yellow (HDSP-7400) and Green (HDSP-7800) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
5
100
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
10
z
0H
10
z
Hz
100
0H
30
Hz
10
1K
1
3K
1
Z
KH
10
I F PEAK RATIO OF MAXIMUM OPERATING
I DC MAX PEAK CURRENT TO TEMPERATURE
DERATED MAXIMUM DC CURRENT
AlGaAs Red
1000
10000
DC OPERATION
t P – PULSE DURATION – µs
IDC MAX. – MAXIMUM DC CURRENT
PER SEGMENT – mA
50
RθJ-A = 770°C/W
45
AlGaAs RED
40
35
30
25
20
15
10
5
0
20 30
40
50 60
70 80
90 100 110 120
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 1. Maximum Allowed Peak Current vs. Pulse Duration – AlGaAs Red.
160
140
120
AlGaAs RED
100
80
60
40
20
0
0
TA – AMBIENT TEMPERATURE – °C
AlGaAs RED
1.25
1.00
0.75
0.50
0.25
0
0
5
10
15
20
25
30
35
40
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 4. Relative Luminous Intensity vs. DC Forward Current.
6
1.5
2.0
2.5
3.0
3.5
4.0
Figure 3. Forward Current vs. Forward Voltage.
ηPEAK – NORMALIZED RELATIVE EFFICIENCY
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
2.00
1.50
1.0
VF – FORWARD CURRENT – V
Figure 2. Maximum Allowable DC Current per Segment as a Function of
Ambient Temperature.
1.75
0.5
1.4
1.2
1.0
0.8
0.6
0.5
AlGaAs RED
5.0
50.0
150.0
IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA
Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs.
Peak Current.
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
10
IDC MAX – MAXIMUM DC CURRENT
PER SEGMENT – mA
35
30
25
z
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 5 mA FOR HER AND )t
(YELLOW AND TO 1 AT 10 mA FOR GREEN)
IF – FORWARD CURRENT PER SEGMENT – mA
YELLOW
HER / ORANGE
GREEN
1.0
2.0
3.0
4.0
5.0
VF – FORWARD VOLTAGE – V
Figure 10. Forward Current vs. Forward Voltage
Characteristics.
7
HER, ORANGE
GREEN
20
YELLOW
15
10
5
0
20 30
40
50
60
70 80
90 100 110 120
TA – AMBIENT TEMPERATURE – °C
80
0
DC OPERATION
z
H
H
z
Z
10000
100
0
10000
40
Figure 9. Maximum Allowable DC Current per Segment as a Function of
Ambient Temperature.
12
10
HER / ORANGE
8
YELLOW
6
4
GREEN
2
0
0
5
10
15
20
25
30
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 11. Relative Luminous Intensity vs. DC
Forward Current.
ηPEAK – RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 5 mA FOR HER,
ORANGE AND YELLOW, AND 10 mA FOR GREEN)
I F PEAK RATIO OF MAXIMUM OPERATING
I DC MAX PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
0
10
0
z
H
K
H
H
K
K
30
1
3
10
1000
DC OPERATION
Figure 8. Allowable Peak Current vs. Pulse Duration – Green.
20
1000
Rθ
= 770°C/W
J-A
45
t P – PULSE DURATION – µs
40
Z
H
0
10 Hz
0
30
50
10
60
100
Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow.
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
100
z
100
10
z
10
t P – PULSE DURATION – µs
Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration – HER, Orange.
1
H
1
t P – PULSE DURATION – µs
1
K
1
1
DC OPERATION
z
10000
H
1000
H
z
K
H
10
K
Hz
100
0
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
0
0
30
Hz
10
Hz
Z
KH
1
1K
3K
10
1
10
100
3
I F PEAK RATIO OF MAXIMUM OPERATING
I DC MAX PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
100
10
I F PEAK RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
I DC MAX
DERATED DC CURRENT
HER, Yellow, Green, Orange
1.8
YELLOW
1.6
HER / ORANGE
1.4
GREEN
1.2
1.0
0.8
0
20
40
60
80
100
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 12. Relative Efficiency (Luminous Intensity
per Unit Current) vs. Peak Current.
Intensity Bin Limits (mcd)
AlGaAs Red
Yellow
HDSP-A15x
HDSP-740x
IV Bin Category
Min.
Max.
IV Bin Category
Min.
Max.
M
7.07
13.00
B
0.229
0.387
N
10.60
19.40
C
0.317
0.582
O
15.90
29.20
D
0.476
0.872
P
23.90
43.80
E
0.714
1.311
Q
35.80
65.60
F
1.073
1.967
G
1.609
2.950
H
2.413
4.425
HER
HDSP-750x
Green
IV Bin Category
Min.
Max.
B
0.342
0.630
HDSP-780x
C
0.516
0.946
IV Bin Category
Min.
Max.
D
0.774
1.418
H
0.86
1.58
E
1.160
2.127
I
1.29
2.37
F
1.740
3.190
J
1.94
3.55
G
2.610
4.785
K
2.90
5.33
H
3.915
7.177
L
4.37
8.01
IV Bin Category
Min.
Max.
A
0.284
0.433
B
0.354
0.541
C
0.443
0.677
D
0.554
0.846
E
0.692
1.057
F
0.856
1.322
G
1.082
1.652
H
1.352
2.066
I
1.692
2.581
J
2.114
3.227
K
2.641
4.034
L
3.300
5.042
M
4.127
6.303
N
5.157
7.878
Orange
HDSP-A40x
8
Contrast Enhancement
Color Categories
Dominant Wavelength (nm)
Color
Bin
Min.
Max.
Yellow
1
581.50
585.00
3
584.00
587.50
2
586.50
590.00
4
589.00
592.50
2
573.00
577.00
3
570.00
574.00
4
567.00
571.00
5
564.00
568.00
Green
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your Avago
representatives for further clarification/information.
For information on contrast enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
For information on soldering LEDs, please refer to Application Note 1027.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2015 Avago Technologies. All rights reserved. Obsoletes 5988-4434EN
AV02-2553EN - October 9, 2015
