HDSP-C5G1

HDSP-C5x1/C5x3 0.52” Single Digit PCB Based LED Display Data Sheet Description Features This is 0.52” height single digit display. It utilizes GaAsP/ GaP Red, Orange, Yellow, Green and AlGaAs/GaAs Red chips. This device is halogenated. • High reliability • Excellent characters appearance • Available in CA and CC • RoHS Compliant • Gray top surface with white diffused segments. Ordering Information Red Green Yellow Orange AlGaAs Red Description HDSP-C5E1 HDSP-C5G1 HDSP-C5Y1 HDSP-C5L1 HDSP-C5A1 Common Anode, Right Hand Decimal HDSP-C5E3 HDSP-C5G3 HDSP-C5Y3 HDSP-C5L3 HDSP-C5A3 Common Cathode, Right Hand Decimal Package Dimensions Notes: 1. All dimensions are in millimeter. 2. Unless otherwise stated, the tolerance is ± 0.25mm. Circuit Diagram Absolute Maximum Ratings at TA = 25°C Parameter Symbol Red/Yellow/ Orange Green AlGaAs Red Units Power Dissipation per segment or Dot Point (DP) PD 57.5 62.5 50 mW Continuous Forward Current per segment IF 25 25 25 mA 0.33 0.33 Derating Linearly from 25°C per segment 0.33 mA/°C Reverse Voltage per segment or DP VR 5 V Operating Temperature TO -40 to 85 °C Storage Temperature TS -40 to 85 °C Wave solder Condition 1.6mm below body 2 250°C peak for 3 secs max Electrical / Optical Characteristic at TA = 25°C Red Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv – 4.0 – mcd IF = 10mA Peak Wavelength λp – 640 – nm IF = 20mA Dominant Wavelength λd – 626 – nm IF = 20mA Forward Voltage per segment or DP VF – 2.0 2.3 V IF = 20mA Reverse Current IR – – 100 μA VR = 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M 2:1 IF = 10mA Green Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv – 6.0 – mcd IF = 10mA Peak Wavelength λp – 565 – nm IF = 20mA Dominant Wavelength λd – 569 – nm IF = 20mA Forward Voltage per segment or DP VF – 2.25 2.5 V IF = 20mA Reverse Current IR – – 100 μA VR = 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M 2:1 IF = 10mA Yellow Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv – 3.0 – mcd IF = 10mA Peak Wavelength λp – 587 – nm IF = 20mA Dominant Wavelength λd – 589 – nm IF = 20mA Forward Voltage per segment or DP VF – 2.15 2.3 V IF = 20mA Reverse Current IR – – 100 μA VR = 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M 3 2:1 IF = 10mA Orange Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv – 4.0 – mcd IF = 10mA Peak Wavelength λp – 610 – nm IF = 20mA Dominant Wavelength λd – 605 – nm IF = 20mA Forward Voltage per segment or DP VF – 2.15 2.3 V IF = 20mA Reverse Current IR – – 100 μA VR = 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M 2:1 IF = 10mA AlGaAs Red Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv – 16 – mcd IF = 10mA Peak Wavelength λp – 660 – nm IF = 20mA Dominant Wavelength λd – 643 – nm IF = 20mA Forward Voltage per segment or DP VF – 1.85 2.0 V IF = 20mA Reverse Current IR – – 100 μA VR = 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M 4 2:1 IF = 10mA 2.5 30 2 25 FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 10 mA) Red 1.5 1 0.5 0 5 10 15 20 DC FORWARD CURRENT - mA 25 30 Figure 1. Relative Luminous Intensity Vs Forward Current 0.8 RELATIVE INTENSITY 10 0.6 0.4 0.2 430 480 530 580 630 WAVELENGTH - nm Figure 3. Relative Luminous Intensity Vs Wavelength 680 0 0 0.5 1 1.5 2 FORWARD VOLTAGE - V Figure 2. Forward Voltage Vs Current 1 5 15 5 0 0 380 20 730 780 2.5 3 3 30 2.5 25 FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 10mA) Green 2 1.5 1 0.5 0 5 10 15 20 DC FORWARD CURRENT - mA 25 30 Figure 4. Relative Luminous Intensity Vs Forward Current 0.8 0.6 0.4 0.2 430 480 530 580 630 WAVELENGTH - nm Figure 6. Relative Luminous Intensity Vs Wavelength 680 0 0.5 1 1.5 2 FORWARD VOLTAGE - V Figure 5. Forward Voltage Vs Current 1.0 RELATIVE INTENSITY 10 0 -0.5 6 15 5 0 0.0 380 20 730 780 2.5 3 3.5 30 3 25 FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 10mA) Yellow 2.5 2 1.5 1 5 10 15 20 DC FORWARD CURRENT - mA 25 30 RELATIVE INTENSITY 0.8 0.6 0.4 0.2 430 480 530 580 630 WAVELENGTH - nm Figure 9. Relative Luminous Intensity Vs Wavelength 680 0 0.5 1 1.5 2 FORWARD VOLTAGE - V Figure 8. Forward Voltage Vs Current 1 7 10 0 0 Figure 7. Relative Luminous Intensity Vs Forward Current 0 380 15 5 0.5 0 20 730 780 2.5 3 3 30 2.5 25 FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 10mA) Orange 2 1.5 1 5 10 15 20 DC FORWARD CURRENT - mA 25 30 RELATIVE INTENSITY 0.8 0.6 0.4 0.2 430 480 530 580 630 WAVELENGTH - nm Figure 12. Relative Luminous Intensity Vs Wavelength 680 0 0.5 1 1.5 2 FORWARD VOLTAGE - V Figure 11. Forward Voltage Vs Current 1 8 10 0 0 Figure 10. Relative Luminous Intensity Vs Forward Current 0 380 15 5 0.5 0 20 730 780 2.5 3 2.5 30 2 25 FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 10mA) AlGaAs Red 1.5 1 0.5 0 5 10 15 20 DC FORWARD CURRENT - mA 25 30 Figure 13. Relative Luminous Intensity Vs Forward Current 0.8 RELATIVE INTENSITY 10 0.6 0.4 0.2 430 480 530 580 630 WAVELENGTH - nm Figure 15. Relative Luminous Intensity Vs Wavelength 680 0 0 0.5 1 1.5 2 FORWARD VOLTAGE - V Figure 14. Forward Voltage Vs Current 1 9 15 5 0 0 380 20 730 780 2.5 3 Packing Tube Specifications: Tube Front View Tube Top View For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. AV02-2493EN - May 14, 2010