HDSP-H3G1

HDSP-H3x1/H3x3 0.36" Single Digit PCB Based LED Display Data Sheet Description Features The HDSP-H3x1/H3x3 is a 0.36 inch high, single-digit display series. These halogenated devices utilize AllnGaP red, orange, green and deep red chips. This device is halogenated.  All devices are categorized for luminous intensity. The orange and green devices are categorized for color. Use of similar device categories yields a uniform display.     High reliability Excellent characters appearance Available in CA and CC RoHS Compliant Gray top surface with white diffused segments. Table 1 Ordering Information Red Green Orange Deep Red Description HDSP-H3E1 HDSP-H3G1 HDSP-H3L1 HDSP-H3A1 Common Anode, Right Hand Decimal HDSP-H3E3 HDSP-H3G3 HDSP-H3L3 HDSP-H3A3 Common Cathode, Right Hand Decimal Figure 1 Package Dimension Notes: 1. All dimensions are in millimeters. 2. Unless otherwise stated, the tolerance is ±0.25 mm. Avago Technologies -1- HDSP-H3x1/H3x3 Data Sheet Features Figure 2 Circuit Diagram Table 2 Absolute Maximum Ratings at TA = 25°C Parameter Symbol Red/Orange/Green/Deep Red Units Power Dissipation per segment or Dot Point (DP) PD 52 mW Continuous Forward Current per segment IF 20 mA Peak Forward Current per segment (1/10 Duty Cycle, 0.1m sec pulse width 100 mA Derating Linearly from 25°C per segment 0.21 mA/°C Reverse Voltage per segment or DP VR Not designed for reverse biasing Operating Temperature TO -40 to 85 °C Storage Temperature TS -40 to 85 °C Wave solder Condition 1.6mm below body 260°C peak for 3 secs max Table 3 Red Electrical/Optical Characteristics at TA = 25°C Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv — 15 — mcd IF = 10 mA Peak Wavelength λp — 634 — nm IF = 20 mA Dominant Wavelength λd — 625 — nm IF = 20 mA Forward Voltage per segment / DP VF — 2.0 2.6 V IF = 20 mA Reverse Current per segment / DPa IR — — 100 A VR = 5 V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M — 2:1 — — IF = 10 mA a. Indicates production go-no-go test only. Long term reverse biasing is not recommended. Avago Technologies -2- HDSP-H3x1/H3x3 Data Sheet Features Table 4 Green Electrical/Optical Characteristics at TA = 25°C Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv — 5 — mcd IF = 10 mA Peak Wavelength λp — 570 — nm IF = 20 mA Dominant Wavelength λd — 571 — nm IF = 20 mA Forward Voltage per segment / DP VF — 2.0 2.6 V IF = 20 mA Reverse Current per segment / DPa IR — — 100 A VR = 5 V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M — 2:1 — — IF = 10 mA a. Indicates production go-no-go test only. Long term reverse biasing is not recommended. Table 5 Orange Electrical/Optical Characteristics at TA = 25°C Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv — 13 — mcd IF = 10 mA Peak Wavelength λp — 610 — nm IF = 20 mA Dominant Wavelength λd — 605 — nm IF = 20 mA Forward Voltage per segment / DP VF — 2.0 2.6 V IF = 20 mA Reverse Current per segment / DPa IR — — 100 A VR = 5 V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M — 2:1 — — IF = 10 mA a. Indicates production go-no-go test only. Long term reverse biasing is not recommended. Table 6 Deep Red Electrical/Optical Characteristics at TA = 25°C Parameter Symbol Min Typ Max Units Test Conditions Average Luminous Intensity (Digit Average) Iv — 12 — mcd IF = 10 mA Peak Wavelength λp — 644 — nm IF = 20 mA Dominant Wavelength λd — 635 — nm IF = 20 mA Forward Voltage per segment / DP VF — 2.0 2.6 V IF = 20 mA Reverse Current per segment / DPa IR — — 100 A 5V Luminous Intensity Matching Ratio (Segment to Segment) Iv–M — 2:1 — — IF = 10 mA a. Indicates production go-no-go test only. Long term reverse biasing is not recommended. Avago Technologies -3- HDSP-H3x1/H3x3 Data Sheet Red Red Figure 3 Relative Luminous Intensity Vs Forward Current Figure 4 Forward Voltage Vs Current Figure 5 Relative Luminous Intensity Vs Wavelength Avago Technologies -4- HDSP-H3x1/H3x3 Data Sheet Green Green Figure 6 Relative Luminous Intensity Vs Forward Current Figure 7 Forward Voltage Vs Current Figure 8 Relative Luminous Intensity Vs Wavelength Avago Technologies -5- HDSP-H3x1/H3x3 Data Sheet Orange Orange Figure 9 Relative Luminous Intensity Vs Forward Current Figure 10 Forward Voltage Vs Current Figure 11 Relative Luminous Intensity Vs Wavelength Avago Technologies -6- HDSP-H3x1/H3x3 Data Sheet Deep Red Deep Red Figure 12 Relative Luminous Intensity Vs Forward Current Figure 13 Forward Voltage Vs Current Figure 14 Relative Luminous Intensity Vs Wavelength Avago Technologies -7- Packing Tube Specifications Reference For further information on soldering LEDs, please refer to Avago Technologies Application Note 1027. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago Technologies and the A logo are trademarks of Avago Technologies in the United States and other countries. All other brand and product names may be trademarks of their respective companies. Data subject to change. Copyright © 2015 Avago Technologies. All Rights Reserved. pub-005311 – December 16, 2015