HLMP-6400-F0021

Data Sheet Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Description Broadcom® Subminiature lamps (HLMX-PXXX, HLMXQXXX, HLMP- 6XXX, HLMP-70XX) are available with the standard options listed in this data sheet. Subminiature Lamps with Options 11, 12, 21, 22, 31, and 32 are suitable for surface-mount applications and their leads are formed with gull-wing, yoke-bend and Z-bend, respectively. They are available in tape and reel (compatible to ANSI/EIA RS-481) or bulk. Options 1L, 1S, 2L, and 2S are right-angle lead bends suitable for through-hole applications. Broadcom Features    Surface-mount lead configurations Right-angle lead bend for through-hole mounting Tape and reel in accordance with ANSI/EIA RS-481 specifications AV02-1496EN January 25, 2022 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Device Selection Guide Option Code 11 Gull-Wing Leads, 12-mm Tape on 7 in. Diameter Reel, 1500 Parts per Reela 12 Gull-Wing Lead, Bulk Packaging, Quantity of 500 Partsb 14 Gull-Wing Leads, 12-mm Tape on 13 in. Diameter Reel, 6000 Parts per Reela 21 Yoke Leads, 12-mm Tape on 7 in. Diameter Reel 1500 Parts per Reela 22 Yoke Leads, Bulk Packaging, Quantity of 500 Partsb 24 Yoke Leads, 12-mm Tape on 13 in. Diameter Reel, 6000 Parts per Reela 31 Z-Bend Leads, 12-mm Tape on 7 in. Diameter Reel 1500 Parts per Reela 32 Z-Bend Leads, Bulk Packaging, Quantity of 500 Partsb 34 Z-Bend Leads, 12-mm Tape on 13 in. Diameter Reel, 6000 Parts per Reela 2.54-mm (0.100 inch), Long Leads: 10.4 mm (0.410 in.) Center Lead Spacing, Short Leads: 3.7 mm (0.145 in.) 5.08 mm (0.200 inch), Long Leads: 9.2 mm (0.364 in.) Center Lead Spacing, Short Leads: 3.7 mm (0.145 in.) 1L 1S 2L 2S Package Outline Drawing Package Configuration Surface-Mount Lead Configuations A, H, K, L B, I, K, L C, J, K, L Right Angle Lead Bends for Through-hole Mounting D E F G a. SMT lamps are supplied in 12-mm embossed carrier tape. Minimum order is for one full reel, either 7 inch or 13 inch. All other order quantities must be in reel increments only. Orders for partial reels are not accepted. b. Vapor barrier bags are used for bulk packaging. Part Numbering System HLMX-XXXX-X X X X X Packaging Option Color Bin Selection Max. Iv Bin Min. Iv Bin 4 x 4 Prod. Part Number To order Subminiature Lamps packaged with these standard options, include the appropriate option code along with the device catalog part number. Example: To order the HLMP-6300-F00xx with Option 11 gull-wing leads in 12-mm embossed tape on 178-mm (7 inch) diameter reels, with 1500 lamps per reel, order as follows: HLMP-6300-F0011. Order quantities must be placed in reel increments only. Orders for partial reels will not be accepted. For additional information, contact your Broadcom sales office or franchised distributor for assistance. Broadcom AV02-1496EN 2 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Package Drawings Lead Bend Options Figure 1: Package A, Gull-Wing Lead, Option 11, 12, and 14 CATHODE ANODE 3.81 (0.150) MAX. 0.13 (0.005) R TYP. 0.79 (0.031) 0.53 (0.021) 0.13 (0.005) MAX. CATHODE STRIPE ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) Figure 2: Package B, Yoke Lead, Options 21, 22, and 24 CATHODE STRIPE 0.33 (0.013) R. TYP. 3.45 (0.136) NOM. 0.13 (0.005) TYP. 1.07 (0.042) TYP. 0.79 (0.031) 0.53 (0.021) 7.62 (0.300) MAX. CATHODE ANODE Broadcom ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) AV02-1496EN 3 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Figure 3: Package C, Z-Bend Lead, Option 31, 32, and 34 CATHODE STRIPE 4.06 (0.160) 4.57 (0.180) 0.79 (0.031) 0.53 (0.021) 0.76 (0.030) 0.51 (0.020) 3.05 (0.120) NOM. 5.59 (0.220) 6.10 (0.240) CATHODE ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) ANODE Figure 4: Package D, Right-Angle Bend, Option 1L 10.16 (0.400) 10.67 (0.420) 2.54 (0.100) NOM. CATHODE STRIPE Broadcom ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) AV02-1496EN 4 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Figure 5: Package E, Right-Angle Bend Option 1S 3.43 (0.135) 3.94 (0.155) 2.54 (0.100) NOM. CATHODE STRIPE Broadcom ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) AV02-1496EN 5 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Figure 6: Package F, Right-Angle Bend Option 2L 9.50 (0.374) 8.92 (0.351) 5.08 (0.200) NOM. CATHODE STRIPE ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) Figure 7: Package G, Right-Angle Bend Option 2S 3.43 (0.135) 3.94 (0.155) 5.08 (0.200) NOM. CATHODE STRIPE Broadcom ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) AV02-1496EN 6 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Surface-Mount Tape-and-Reel Options Figure 8: Package H, 12-mm Tape-and-Reel, Gull Wing Lead Broadcom AV02-1496EN 7 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Figure 9: Package I, 12-mm Tape-and-Reel, Yoke Lead Broadcom AV02-1496EN 8 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Figure 10: Package J, 12-mm Tape-and-Reel, Z-Bend Lead Embossed Carrier Tape Dimensions, Per ANSI/EIA Standard RS-481a Yoke and Z-Bend Flat Top Gull-Wing Dome Gull-Wing Flat Top Yoke Dome Z-Bend Dome D 1.55 (0.061 ± 0.002) Diameter 1.55 (0.061 ± 0.002) Diameter D1 N/A (No Push Pin Hole) E F K0 1.0 (0.039) Diameter Min. 20.2 (0.795) Diameter Min. 1.75 ± 0.1 (0.069) — 3.05 ± 0.1 (0.120) Typ. 1.55 (0.061 ± 0.002) Diameter (0.059 + 0.004) Diameter N/A (No Push Pin Hole) 1.50 + 0.10 (0.059 + 0.004) Diameter 1.50 + 0.25 (0.059 + 0.010) 20.2 (0.795) Diameter Min. 1.75 ± 0.1 (0.069) P P0 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. P2 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) t 0.3 (0.012) Typ. 0.3 (0.012) Typ. 0.3 (0.012) Typ. W 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 0.305 ± 0.013 (0.0120 ± 0.0005) 12.0 ± 0.3 (0.472 ± 0.012) 0.305 ± 0.013 (0.0120 ± 0.0005) 12.0 ± 0.3 (0.472 ± 0.012) D2 20.2 (0.795) Diameter Min. 1.75 ± 0.1 (0.069) 20.2 (0.795) Diameter Min. 1.75 ± 0.1 (0.069) 5.50 ± 0.05 (0.217 ± 0.002) 2.54 ± 0.1 (0.100) Typ. 3.05 ± 0.1 (0.120) Typ. 2.97 ± 0.1 (0.117) Typ. 1.50 + 0.10 N/A (No Push Pin Hole) 20.2 (0.795) Diameter Min. 1.75 ± 0.1 (0.069) — 3.05 ± 0.1 (0.120) Typ. a. All dimensions are in millimeters (inches). Broadcom AV02-1496EN 9 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Figure 11: Package K, 12-mm Tape and Reel PART: LOT NO: CUST PART: QTY: D/C: TAPE DATE: Broadcom CAT: BIN: QA INSP. C/O: AV02-1496EN 10 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Reel Dimensions, Per ANSI/EIA Standard RS-481a A C N T 7-inch Reel 13-Inch Reel 178.0 ± 2.0 (7.0 ± 0.08) Diameter 13.0 (0.512) Diameter Typ. 50.0 (1.97) Min. 18.4 (0.72) Max. 330 (12.9) Diameter Max. 13.0 (0.512) Diameter Typ. 100.0 (3.93) Min. 18.4 (0.72) Max. a. All dimensions are in millimeters (inches). NOTE:    Broadcom Storage Condition: 5°C to 30°C at 60% RH max. Baking is required under the following conditions: – Humidity Indicator Card is >10% when read at 23 ± 5°C. – The pack has been opened for more than 4 weeks. Baking recommended condition: 60 ± 5˚C for 20 hours. AV02-1496EN 11 Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Data Sheet Standard SMT and Through-Hole Lead Bend Options for Subminiature LED Lamps Recommended Reflow Soldering Profile and Soldering Pad Pattern Figure 12: Recommended SnPb Reflow Soldering Profile Figure 15: Recommended Soldering Pad Pattern for Yoke Leads 21, 22, and 24 10 SEC. MAX. TEMPERATURE 230 #27 DRILL 3.73 (0.147) DIA. CLEARANCE HOLE THROUGH PC BOARD +5 °C MAX. –0 3°C/SEC. MAX. 183°C 1.27 (0.50) 125-170°C 3-4°C/SEC. 0.89 (0.035) 2-3°C/SEC. 50°C 60-150 SEC. 120 SEC. MAX. 0.45 (0.018) 25°C 0.64 (0.025) TIME 3.30 (0.130) 6.60 (0.260) Wait until device has cooled to room temperature before handling. DIMENSIONS ARE IN MILLIMETERS (INCHES) Figure 16: Recommended Soldering Pad Pattern for Z-Bend Leads 31, 32, and 34 Figure 13: Recommended Pb-Free Reflow Soldering Profile #27 DRILL 3.73 (0.147) DIA. CLEARANCE HOLE THROUGH PC BOARD TEMPERATURE 10 - 30 SEC. 217 °C 200 °C 255 - 260 °C 3 °C/SEC. MAX. DIMENSIONS ARE IN MILLIMETERS (INCHES) 1.27 (0.50) 6 °C/SEC. MAX. 0.89 (0.035) 150 °C 3 °C/SEC. MAX. 0.45 (0.018) 100 SEC. MAX. 60 - 120 SEC. TIME 3.30 (0.130) (Acc. to J-STD-020C) 6.60 (0.260) Figure 14: Recommended Soldering Pad Pattern for Gull-Wing Leads 11, 12, and 14 0.89 (0.035) 0.45 (0.018) 0.89 (0.035) 1.78 (0.070) 0.45 (0.018) 3.58 (0.140) Broadcom AV02-1496EN 12 Disclaimer Broadcom’s products and software are not specifically designed, manufactured, or authorized for sale as parts, components, or assemblies for the planning, construction, maintenance, or direct operation of a nuclear facility or for use in medical devices or applications. The customer is solely responsible, and waives all rights to make claims against Broadcom or its suppliers, for all loss, damage, expense, or liability in connection with such use. Copyright © 2005–2022 Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. For more information, go to www.broadcom.com. All trademarks, trade names, service marks, and logos referenced herein belong to their respective companies. Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. Lead (Pb) Free RoHS Compliant