HLMP-AD31-UX000

5 mm Mini Oval Mid Power AlInGaP LEDs Data Sheet Description Features These Precision Optical Performance Oval LEDs are specially designed for full color/video and passenger information signs. The oval shaped radiation pattern and high luminous intensity ensure that these devices are excellent for wide field of view outdoor application where a wide viewing angle and readability in sunlight are essential. These lamps have very smooth, matched radiation patterns ensuring consistent color mixing in full color application, message uniformity across the viewing angle of the sign. High efficiency LED material is used in these lamps: Aluminum Indium Gallium Phosphide (AlInGaP) for amber and red. Each lamp is made with an advance optical grade epoxy offering superior high temperature and high moisture resistance in outdoor applications. The package epoxy contains both UV-A and UV-B inhibitors to reduce the effects of long term exposure to direct sunlight. • High Luminous Output Applications • Traffic management: - Traffic Signals - Pedestrian signals - Work Zone Warning Lights - Variable Message Signs • Commercial Outdoor advertising - Sign - Marquees • Well defined spatial radiation pattern • Viewing angles: 30 x 70 Major axis 70 Minor axis 30 • Red and Amber Intensity are available for AlInGaP • Colors: - 626 nm red - 592 nm amber • Superior resistance to moisture • UV resistant epoxy • Package With or Without lead stand-Offs Benefits • Viewing Angle match Traffic Management Sign Requirements • Colors Meet Pedestrian Signal Specifications • Superior performance In Outdoor and Indoor Environments • Suitable for Auto-insertion onto PC Boards • Suitable for high current application which give good sign contrast and reduce the number of LED use in a cluster Package Dimensions A 8.71`0.2 .343`.008 3.80 0.150 0.50`0.1 .020`.004 5.20`0.20 .205`.008 5.20`0.2 .205`.008 CATHODE LEAD 1.00MIN .039 2.54 0.10 31.61MIN 1.244 Package Dimensions B 8.71`0.2 .343`.008 1.51 .059 3.80 0.150 0.50`0.1 .020`.004 5.20`0.2 .205`.008 5.20`0.20 .205`.008 11.04 1.51 .059 +0.13-0.08 .435 CATHODE LEAD 1.00MIN .039 2.54 0.10 +.005NOTES: 1. MEASURED JUST ABOVE FLANGE. 31.61MIN 1.244 Notes: 1. Dimension in millimeters (inches) 2. Tolerance ± 0.1 mm unless otherwise noted. Luminous Intensity Iv (mcd) [1,2] @70 mA Package Drawing Part Number Standoff Color and Dominant Leads Wavelength (nm). Typ. [3] Min. Typ. Max. HLMP-AD30-UX000 No Red/626 3200 6053 9300 A HLMP-AD31-UX000 Yes Red/626 3200 6053 9300 B HLMP-AL30-TW000 No Amber/592 2500 3920 7200 A HLMP-AL31-TW000 Yes Amber/592 2500 3920 7200 B Notes: 1. The luminous Intensity is measured on the axis of the lamps packages. 2. The optical axis is closely aligned with the package mechanical axis. 3. The dominant wavelength, λd, is derive from the CIE Chromaticity Diagram and represents the color of the lamps. 4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 2 Part Numbering System HLMP – x x xx - x x x xx Mechanical Option 00: Bulk DD: Ammo pack Color Bin Option 0: Full color bin distribution Max Intensity Bin Limit 0: No maximum intensity bin limit Min Intensity Bin Limit Refer to device selection guide Viewing Angle and Standoff Option 30: without standoff 31: with standoff Color D: Red 626 nm L: Amber 592 nm Package A: 5 mm 30 x 70 Oval Parallel Absolute Maximum Rating (TA = 25°°C) Parameters DC forward current Value [1] 70 mA Peak pulsed forward current 100 mA Average forward current 70 mA Reverse voltage (Ir = 100 A) 5V LED junction temperature 130 C Operating temperature -40 C to +100 C Storage temperature Wave soldering temperature Solder Dipping Temperature -40 C to +120 C [2] [2] Note: 1. Derate linearly as shown in figure 4. 2. 1.59 mm (0.060 in.) below body 3 250 C for 3 seconds 260°C for 5 seconds Electrical and Optical Characteristics at TA=25°C Parameters Min Typ Max Unit Test Condition 2.10 2.84 2.45 3.25 V IF = 70 mA 20 V IF = 100 µA Peak Wavelength: Amber (λd=592 nm) Red (λd=626 nm) 595 638 nm IF = 70 mA Spectral Halfwidth Amber (λd=592 nm) Red (λd=626 nm) 16 20 nm IF = 70 mA Capacitance Amber (λd=592 nm) Red (λd=626 nm) 17 34 pF VF=0, f=1 MHz Thermal Resistance 130 °C/W LED Junction to cathode Luminous Efficacy[1] Amber (λd=592 nm) Red (λd=626nm) 800 970 Im/W Emitted Luminous Power/ Emitted Radiant power Forward voltage Amber (λd=592 nm) Red (λd=626 nm) Reverse voltage 5 Note: 1. The radiant intensity, Ie in watts per steradian, may be found from the equation Ie=Iv/hv, where Iv is the luminous intensity in candelas and hv iis the luminous efficacy in lumens/watt. 4 Forward Current Vs Forward Voltage RELATIVE LUMINOUS INTENSITY VS WAVELENGTH 90 1.0 80 Red Amber RELATIVE INTENSITY FORWARD CURRENT - mA 0.8 0.6 0.4 0.2 70 60 50 Amber Red 40 30 20 10 0.0 380 480 580 680 0 780 0 1 WAVELENGTH - nm Figure 1. Relative Intensity vs. Wavelength IF - FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 70 mA) 80 1.0 0.8 Red Amber 0.6 0.4 0.2 0 60 50 RθJA = 400˚C/W 40 30 20 10 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 DC FORWARD CURRENT - mA Figure 3. Relative Luminous Intensity vs. Forward Current 20 40 60 80 100 120 TA - AMBIENT TEMPERATURE - ˚C Figure 4. Maximum Forward Current vs Ambient Temperature. Derating Based on TJMAX=130°C. 1 1 0.9 0.9 0.8 0.8 NORMALIZED INTENSITY NORMALIZED INTENSITY 70 0 0 0.7 0.6 0.5 0.4 0.3 0.2 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.1 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES Figure 5. Representative Spatial Radiation Pattern of the — minor axis 5 4 Figure 2. Forward Current vs. Forward Voltage 1.2 0 -90 2 3 FORWARD VOLTAGE - V 90 0 -90 -60 -30 0 30 60 90 ANGULAR DISPLACEMENT - DEGREES Figure 6. Representative Spatial Radiation Pattern for — major axis Intensity Bin Limits (mcd at 70 mA) Bin Name Min. Amber color Bin Limits (nm at 70 mA) Max. S 1900 2500 T 2500 3200 U 3200 4200 V 4200 5500 W 5500 7200 X 7200 9300 Tolerance for each bin limits is ±15% Bin Name Min. Max. Corner Point 1 2 3 4 1 584.5 587.0 x 0.542 0.537 0.553 0.557 y 0.458 0.455 0.440 0.442 x 0.557 0.553 0.567 0.572 y 0.442 0.440 0.425 0.427 x 0.572 0.567 0.582 0.587 y 0.427 0425 0.411 0.413 x 0.587 0.582 0.595 0.600 y 0.413 0.411 0.398 0.399 2 4 6 587.0 589.5 592.0 589.5 592.0 594.5 Tolerance for each bin limits is ±0.5nm For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Pte. All rights reserved. 5989-3988EN - May 9, 2006