HLMP-WL02

Agilent HLMP-WL02, HLMP-WG02 High Intensity AlInGaP LED Lamps Data Sheet Features • T-1 3/4 (5 mm) General Purpose LED Lamps • AlInGaP SunPower Intensity Description • High Light Output This 5 mm LED lamps is specially designed for applications requiring higher levels of intensity than is achieved with a standard lamp. The 5 mm lamp is available with 65 degree viewing angle. • Tinted Diffused Lens • Amber and Red • Available on Tape and Reel Applications • General Purpose • Consumer Goods Device Selection Guide Color Part Number Luminous Intensity Viewing Angle Min. mcd, 2θ½ (Degrees) If @ 20 mA Amber HLMP-WL02 35 65 Red HLMP- WG02 26 65 T-1 ¾ (5 mm) Lamp • Indicator Lights Notes: 1. Dominant Wavelength, λd, is derived from the CIE Chromaticity Diagram, and represents the color of the lamp. 2. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 3. The luminous intensity is measured on the mechanical axis of the lamp package. 4. The optical axis is closely aligned with the package mechanical axis. Package Dimensions 1.14 ± 0.20 (0.045 ± 0.008) 2.35 (0.093) MAX. 0.70 (0.028) MAX. 0.50 ± 0.10 (0.020 ± 0.004) SQ. TYP. 5.00 ± 0.20 (0.197 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008 5.80 ± 0.20 (0.228 ± 0.008) 2.54 ± 0.38 (0.100 ± 0.015) CATHODE LEAD 31.60 (1.244) MIN. CATHODE FLAT 1.00 MIN. (0.039) Absolute Maximum Ratings at TA = 25°C Parameter 5 mm DC Forward Current 50 mA [1,3,4] Peak Pulsed Forward Current [3,4] 70 mA Average Forward Current 30 mA Reverse Voltage (IR = 100 mA) 5V LED Junction Temperature 130°C Operating Temperature -40°C to + 100°C Storage Temperature -40°C to + 120°C Wave Soldering Temperature Soldering Dipping Temperature [1.59 mm (0.06 in.) below body] 250°C for 3 seconds 260°C for 5 seconds Notes: 1. Derate linearly as shown in Figure 4. 2. For long term performance with minimal light output degradation, drive currents between 10 and 30 mA are recommended. 3. Please contact your Agilent sales representative about operating currents below 10 mA. Electrical/Optical Characteristics at TA = 25°C Parameter Symbol Forward Voltage Amber (λd = 590 nm) Red (λd = 626 nm) VF Reverse Voltage VR Peak Wavelength Amber Red λPEAK Spectral Halfwidth Min. Typ. Max. Units Test Conditions 2.02 1.90 2.4 V IF = 20 mA 20 V IR = 100 mA 592 635 nm Peak of Wavelength of Spectral Distribution at IF = 20 mA ∆λ½ 17 nm Wavelength Width atSpectral Distribution ½ Power point at IF = 20 mA Speed of Response τs 20 ns Exponential Time Constant, e-t/τs Capacitance C 40 pF VF = 0, f = 1 MHz Thermal Resistance RθJ-PIN 240 °C/W LED Junction-to-Cathode Lead Luminous Efficacy[5] Amber Red ηv 500 155 lm/W Emitted Luminous Power/Emitted RadiantPower 5 Note: 1. The radiant intensity, Ie, in watts per steridian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. 2 1.0 RELATIVE INTENSITY AMBER RED 0.5 0 550 600 650 700 WAVELENGTH - nm Figure 1. Relative Intensity vs. Peak Wavelength. 70 60 AMBER CURRENT - mA 50 40 30 RED 20 10 0 1.0 50 2.5 2.0 1.5 1.0 0.5 0 1.5 2.0 2.5 IF - FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 3.0 3.0 NORMALIZED INTENSITY - % 40 20 60 IF - DC FORWARD CURRENT - mA Figure 3. Relative Luminous Intensity vs. Forward Current. 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -100 -80 -60 -40 -20 0 20 40 ANGULAR DISPLACEMENT - DEGREES Figure 5. Representative Spatial Radiation Pattern for 65° 3 RθJA = 585° C/W 30 RθJA = 780° C/W 20 10 0 0 VF - FORWARD VOLTAGE - V Figure 2. Forward Current vs. Forward Voltage. 40 60 80 100 0 20 60 100 40 80 TA - AMBIENT TEMPERATURE - °C Figure 4. Maximum Forward Current vs. Ambient Temperature. Derating Based on TJMAX = 130°C. www.agilent.com/ semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2005 Agilent Technologies, Inc. Obsoletes 5989-1433EN May 11, 2005 5989-2968EN