Data Sheet
HSMx-A43x-xxxxx
Surface Mount LED Indicator
Description
Features
The Broadcom® Power PLCC-4 SMT LEDs with Lens are
high-performance PLCC-4 package size SMT LEDs targeted
mainly in Automotive and Electronic Signs and Signals (ESS)
markets. These top-mount single-chip packages with focused
radiation offer high brightness in beam direction and are
excellent for interior automotive, indoor and outdoor sign, and
industrial applications. With additional lens in 30° variants,
these products are especially fitting to applications for traffic
lights, CHMSL, and displays.
The PLCC-4 package family is able to dissipate heat better
compared to the PLCC-2 packages. In proportion to this
increase in driving current, this family of LEDs is able to
produce higher light output compared to the conventional
PLCC-2 SMT LEDs.
As an extension of the standard flat top PLCC-4 SMT LEDs, the
Power PLCC-4 with Lens device is able to provide focused
beams within narrow viewing angles (30°) meeting the market’s
requirements for focused radiation and high brightness in beam
directions.
The Power PLCC-4 SMT LED with 30° is ideal for panel, push
button, or general backlighting in automotive interior and
exterior, sign, office equipment, industrial equipment, and
home appliances applications. This package design, coupled
with careful selection of component materials, allows the
Power PLCC-4 SMT LED with Lens to perform with higher
reliability in a larger temperature range –40 °C to 100 °C. This
high reliability feature is crucial to allow the Power PLCC-4
SMT LED with Lens to perform well in harsh environments,
such as its target Automotive and ESS markets. The Power
PLCC-4 SMT LED with Lens package is designed to be
compatible with IR-solder reflow soldering.
Industry-standard PLCC-4
High reliability LED package
High brightness using AllnGaP and InGaN dice technologies
High optical efficiency
Narrow viewing angle at 30°
Available in 8-mm carrier tape on 7-inch reel
Compatible with IR soldering process
Applications
Interior automotive:
Instrument panel backlighting
Central console backlighting
Cabin backlighting
Navigation and audio system
Dome lighting
Push button backlighting
Exterior automotive:
Turn signals
CHMSL
Rear combination lamp
Side repeaters
Electronic signs and signals:
Interior and exterior full color sign
Variable message sign
Garden lighting
Office automation, home appliances, industrial
equipment:
Front panel backlighting
Push button backlighting
Display backlighting
CAUTION! This LED is ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to
application note AN-1142 for additional details.
Broadcom
AV02-0208EN
August 10, 2022
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
The Broadcom Power PLCC-4 SMT LED with 30° Lens carries the part number HSMx- A43x-xxxxx. The high brightness
AlInGaP and InGaN dice technologies used provide the product brightness that meets the Automotive and ESS market
requirements. The lens package will complement and complete the existing AlInGap and InGaN color standard
Power-PLCC-4 LED that Broadcom offers, providing customers an extra lens option from one supplier.
To facilitate easy pick-and-place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in
single intensity and color bin (except for the red color), to provide close uniformity.
Figure 1: Package Dimensions Source A
2.8 ± 0.2
3.87 max.
2.2 ± 0.2
+ve
0.80 ± 0.1
0.1 TYP.
-ve
3.2 ± 0.2
3.5 ± 0.2
0.8 ± 0.3
-ve
-ve
0.5 ± 0.1
0.7 ± 0.1
Package marking
Figure 2: Package Dimensions Source B
2.8 r 0.2
2.2 r 0.2
+ve
-ve
3.87 max.
0.80 r 0.1
3.2 r 0.2
0.1 TYP.
3.5r0.2
0.8r0.3
-ve
-ve
0.5r0.1
0.7 r 0.1 Package marking
NOTE:
1. All dimensions are in mm.
2. Electrical connection between all cathodes is recommended.
Broadcom
AV02-0208EN
2
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Device Selection Guide
Min. IV (mcd)
Typ. IV (mcd)
Max. IV (mcd)
Test Current
(mA)
Dice
Technology
HSMC-A430-W50M1
1125
2300
3550
50
AlInGaP
HSMC-A431-X90M1
2240
4000
7150
50
AlInGaP
HSMC-A431-Y70M1
3550
—
7150
50
AlInGaP
HSMC-A431-Y80M1
3550
—
9000
50
AlInGaP
HSMJ-A430-W50M1
1125
2300
3550
50
AlInGaP
HSMJ-A431-X90M1
2240
4500
7150
50
AlInGaP
HSMJ-A431-Y70M1
3550
—
7150
50
AlInGaP
Orange
HSML-A431-X90M1
2240
4500
7150
50
AlInGaP
Amber
HSMA-A430-W90M1
1400
3000
4500
50
AlInGaP
HSMA-A431-Y00M1
2850
5000
—
50
AlInGaP
HSMA-A431-X90M1
2240
4700
7150
50
AlInGaP
HSMA-A431-Z50M1
4500
—
14000
50
AlInGaP
HSMA-A431-Z5WM1
4500
—
14000
50
AlInGaP
Color
Part Number
Red
Red Orange
Green
Blue
HSMM-A430-X90M2
2240
—
7150
30
InGaN
HSMM-A430-Y3YM2
2850
—
5600
30
InGaN
HSMM-A430-Y7YM2
3550
—
7150
30
InGaN
HSMN-A430-V50M2
715
—
2240
30
InGaN
HSMN-A430-V7YM2
900
—
1800
30
InGaN
NOTE:
1. The luminous intensity, IV, is measured at the mechanical axis of the lamp package. The actual peak of the
spatial radiation pattern might not be aligned with this axis.
2. IV tolerance is ±12%.
Broadcom
AV02-0208EN
3
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Part Numbering System
H
S
M
x1
-
A
x2
x3
x4
-
x5
x6
x7
Code
Description
Option
x1
LED Chip Color
A
Amber
C
Red
J
Red Orange
L
Orange
M
Green
N
Blue
PLCC-4
x8
x9
x2
Package Type
4
x3 x4
Device Specific Configuration
—
x5
Minimum Intensity Bin Limits
Refer Intensity Bin Limit
x6
Intensity Bin Select
0
Full Distribution
2
2 half bins starting from X51
3
3 half bins starting from X51
4
4 half bins starting from X51
5
5 half bins starting from X51
6
2 half bins starting from X52
7
3 half bins starting from X52
8
4 half bins starting from X52
9
5 half bins starting from X52
0
Full Distribution
Z
A and B only
Y
B and C only
W
C and D only
V
D and E only
U
E and F only
x7
x8 x9
Broadcom
Color Bin Select
Packaging Option
T
F and G only
S
G and H only
Q
A, B and C only
P
B, C and D only
N
C, D and E only
M
D, E and F only
L
E, F and G only
K
F, G and H only
1
A, B, C and D only
2
E, F G and H only
M1
50-mA test current, top mount, 13 inch reel size
M2
30-mA test current, top mount, 13 inch reel size
AV02-0208EN
4
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Intensity Bin Limits
Color Bin Limits
Bin ID
Min. IV (mcd)
Max. IV (mcd)
Blue
Min. (nm)
Max. (nm)
U1
450.00
560.00
U2
560.00
715.00
V1
715.00
900.00
V2
900.00
1125.00
A
B
C
D
460.0
465.0
470.0
475.0
465.0
470.0
475.0
480.0
W1
1125.00
1400.00
W2
1400.00
1800.00
X1
1800.00
2240.00
Green
Min. (nm)
Max. (nm)
X2
2240.00
2850.00
Y1
2850.00
3550.00
Y2
3550.00
4500.00
Z1
4500.00
5600.00
A
B
C
D
515.0
520.0
525.0
530.0
520.0
525.0
530.0
535.0
Z2
5600.00
7150.00
Amber
Min. (nm)
Max. (nm)
A
B
C
D
E
F
582.0
584.5
587.0
589.5
592.0
594.5
584.5
587.0
589.5
592.0
594.5
597.0
Orange
Min. (nm)
Max. (nm)
A
B
C
D
E
597.0
600.0
603.0
606.0
609.0
600.0
603.0
606.0
609.0
612.0
Red
Orange
Min. (nm)
Max. (nm)
A
B
611.0
616.0
616.0
620.0
Red
Min. (nm)
Max. (nm)
11
7150.00
9000.00
12
9000.00
11250.00
21
11250.00
14000.00
22
14000.00
18000.00
Tolerance of each bin limit = ±12%.
Full Distribution
Broadcom
AV02-0208EN
5
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Absolute Maximum Ratings (TA = 25°C)
Parameters
HSMA/C/J/L
HSMM/N
Unit
DC Forward Currenta
70
30
mA
Peak Forward Currentb
200
90
mA
Power Dissipation
180
114
mW
5
4
V
Reverse Voltage
110
°C
Operating Temperature
Junction Temperature
–40 to +100
°C
Storage Temperature
–40 to +100
°C
a. Derate linearly as shown in Figure 7 and Figure 8.
b. Duty factor = 10%, frequency = 1 kHz.
Optical Characteristics (TA = 25°C)
Peak
Wavelength,
PEAK (nm)
Dominant
Wavelength,
Da (nm)
Viewing Angle,
2½b(Degrees)
Luminous
Efficacy, Vc
(lm/W)
Typical
Typical
Typical
Typical
Color
Part Number
Dice Technology
Red
HSMC-A43x
AlInGaP
635
626
30
150
Red Orange
HSMJ-A43x
AlInGaP
621
615
30
240
Orange
HSML-A431
AlInGaP
609
605
30
320
Amber
HSMA-A43x
AlInGaP
592
590
30
480
Green
HSMM-A430
InGaN
518
525
30
500
Blue
HSMN-A430
InGaN
468
470
30
75
a. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device.
b. ½ is the off-axis angle where the luminous intensity is ½ the peak intensity.
c. Radiant intensity, Ie in watts/steradian, can be calculated from the equation Ie = IV/V, where IV is the luminous intensity in candelas and V
is the luminous efficacy in lumens/watt.
Electrical Characteristics (TA = 25°C)
Part
Number
HSMC/J/L/A
Part
Number
HSMM/N
Broadcom
Forward Voltage, VF (Volts) at IF = 50 mA
Reverse Voltage, VR at 100 µA
Reverse Voltage, VR at 10 µA
Min.
Typ.
Max.
Min.
Min.
1.7
2.2
2.5
5
—
Reverse Voltage VR at 100 µA
Reverse Voltage VR at 10 µA
Forward Voltage VF (Volts) at IF = 30 mA
Min.
Typ.
Max.
Min.
Min.
2.7
3.9
4.6
—
5
AV02-0208EN
6
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Figure 3: Relative Intensity vs. Wavelength
Figure 4: Forward Current vs. Forward Voltage
80
1
70
AlInGaP Amber
InGaN
Green
0.6
FORWARD CURRENT - mA
RELATIVE INTENSITY
0.8
InGaN
Blue
AlInGaP Orange
0.4
AlInGaP Red Orange
0.2
AlInGaP Red
50
40
30
20
430
480
530
580
630
WAVELENGTH - nm
680
730
HSMM/N
10
0
380
HSMC/J/L/A
60
0
780
Figure 5: Relative Intensity vs. Forward Current (AlInGaP)
0
4
5
1.2
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 30 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 50 mA)
2
3
FORWARD VOLTAGE - V
Figure 6: Relative Intensity vs. Forward Current (InGaN)
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Figure 7: Maximum Forward Current vs. Ambient
Temperature. Derated Based on TJmax = 110 °C (AlInGaP)
1.0
0.8
0.6
0.4
0.2
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75
DC FORWARD CURRENT - mA
0
5
10
15
20
25
DC FORWARD CURRENT - mA
30
35
Figure 8: Maximum Forward Current vs. Ambient
Temperature. Derated Based on TJmax = 110 °C (InGaN)
35
MAXIMUM FORWARD CURRENT – mA
80
MAXIMUM FORWARD CURRENT – mA
1
70
60
350C/W
50
300C/W
40
470C/W
30
20
10
30
300C/W
25
350C/W
20
470C/W
15
10
5
0
0
0
Broadcom
20
60
80
40
AMBIENT TEMPERATURE – C
100
120
0
20
60
80
40
AMBIENT TEMPERATURE – C
100
120
AV02-0208EN
7
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Figure 9: Radiation Pattern
1
0.9
NORMALIZED INTENSITY
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-90
-60
-30
0
30
60
90
ANGULAR DISPLACEMENT - DEGREES
Figure 10: Recommended Soldering Pad Pattern (IR Reflow)
X
2.60
(0.103)
X
0.40 (0.016)
1.10
(0.043)
Y
0.50
(0.020)
4.50 (0.178)
1.50 (0.059)
Y
DIMENSIONS IN mm (INCHES).
SOLDER RESIST
Figure 11: Soft Tip Vacuum Pick-Up Tool for Extracting SMD
LED Components from Carrier Tape
REPRESENTS ELECTRICAL
CONNECTIVITY BETWEEN PADS
Figure 12: Recommended Pb-Free Reflow Soldering Profile
Vacuum Pick-up Tool
10 to 20 SEC.
255 °C +5°C
-0°C
Nozzle Inner Diameter
size: 1.0 to 1.5 mm
Soft Tip
TEMPERATURE
217°C
-6°C/SEC MAX.
3°C/SEC MAX.
125°C +/- 25°C
60-150 SEC.
1.25mm
Radius Contour
MAX. 120 SEC.
TIME
Broadcom
AV02-0208EN
8
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Figure 13: Tape Leader and Trailer Dimensions
TRAILER
COMPONENT
LEADER
480 mm MIN. FOR O180 REEL.
960 mm MIN. FOR O 330 REEL.
200 mm MIN. FOR O 180 REEL.
200 mm MIN. FOR O 330 REEL.
C
A
USER FEED DIRECTION
Figure 14: Tape Dimensions
8.00 ± 0.10
2.00 ± 0.05
4.00 ± 0.10
O 1.50 ± 0.10
12.00 + 0.30
- 0.10
1.75 ± 0.10
5.50 ± 0.05
.388 ± 0.02
32° MAX
8° MAX
1.24
32° MAX
8° MAX
3.52 ± 0.10
3.00 ± 0.10
Broadcom
3.70 ± 0.10
AV02-0208EN
9
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Figure 15: Reeling Orientation
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Control of assembled boards:
If the PCB soldered with the LEDs is to be subjected to
other high-temperature processes, store the PCB in a
sealed MBB with desiccant or desiccator at 30°C/60%
RH at any time.
– The LED's floor life exceeded 672 hours.
The recommended baking condition is 60°C ± 5ºC for
20 hours.
Baking can only be done once.
Handling of Moisture-Sensitive
Devices
This product is qualified as Moisture Sensitive Level 2a per
JEDEC J-STD-020. The following precautions for handling
this moisture-sensitive product will help to ensure the
reliability of the product. Refer to Broadcom Application
Note AN5305, Handling of Moisture Sensitive Surface
Mount Devices, for details.
Before use:
– An unopened moisture barrier bag (MBB) can be
stored at
