HSMH-C660

Agilent HSMx-C660 Right Angle Surface Mount Chip LEDs Data Sheet Features • Right Angle Mounting • Compatible with IR Reflow Soldering Process • Available in a Wide Variety of Colors • Available in 8 mm Tape on 178 mm (7") Diameter Reels Description The HSMx-C660 series of chip-type LEDs are designed to illuminate at a right angle to the direction of mounting. When mounted on a PC board, these devices will emit light in a direction parallel to the board. Package Dimensions CATHODE Applications • LCD Backlighting • Keypad Side/Backlighting • Light Piping • Right Angle Indicator ANODE 3.0 1.0 0.3 The small 3.0 x 2.0 mm footprint of the HSMx-C660 is designed for applications where space is limited. These devices are available in four colors and use untinted, nondiffused optics. 0.3 2.0 2.0 1.0 The HSMx-C660 series of parts are compatible with IR reflow soldering process only. 0.25 0.25 0.88 CATHODE ANODE POLARITY MARK R 0.45 TO REINFORCE SOLDERING (NON-PIN CONNECTION) Footprint (mm) Parts per Reel DH AS AlGaAs High Efficiency Red Yellow Green 3.0 x 2.0 x 1.0 3000 HSMH-C660 HSMS-C660 HSMY-C660 HSMG-C660 Absolute Maximum Ratings at TA = 25°C Parameter HSMx-C660 Units 25 mA Power Dissipation 65 mW Reverse Voltage (IR = 100 µA) 5 V Operating Temperature Range –30 to +85 °C Storage Temperature Range[2] –40 to +100 °C DC Forward Current[1] Notes: 1. Derate linearly as shown on Figure 4. 2. Maximum temperature for the tape and reel packaging is 60°C. Optical Characteristics at TA = 25°C Luminous Intensity Iv (mcd) @ IF = 20 mA Min. Typ. Peak Wavelength λpeak (nm) Typ. Color Dominant Wavelength λd[1] (nm) Typ. Viewing Angle 2θ1/2 (degrees)[2] Typ. Luminous Efficacy ηv (lm/W) 6.3 16.0 650 639 155 80 Part No. Color HSMH-C660 DH AlGaAs Red HSMS-C660 High Efficiency Red 1.6 5.0 639 626 155 145 HSMY-C660 Yellow 1.6 5.0 589 586 155 500 HSMG-C660 Green 4.0 9.0 570 572 155 595 Notes: 1. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 2. θ1/ 2 is the off-axis angle where the luminous intensity is 1/ 2 the peak intensity. Electrical Characteristics at TA = 25°C Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. Reverse Breakdown VR (Volts) @ IR = 100 µA Min. Capacitance C (pF) VF = 0, f = 1 MHz Typ. Thermal Resistance RθJ-PIN (°C/W) 1.8 2.2 5 4.5 300 Part No. Color HSMH-C660 DH AlGaAs Red HSMS-C660 High Efficiency Red 1.9 2.6 5 4.0 300 HSMY-C660 Yellow 2.1 2.6 5 3.0 300 HSMG-C660 Green 2.2 2.6 5 8.0 300 2 Color Bin Limits [1] Bin ID A B C D E Green Color Bins [1] Dom. Wavelength [nm] MIN. MAX. 561 565 564 568 567 571 570 574 573 577 Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. Light Intensity (Iv) Bin Limits[1] Bin ID A B C D E F G H J K L M N P Q R S T Intensity (mcd) min. max. 0.10 0.20 0.16 0.32 0.25 0.50 0.40 0.80 0.63 1.25 1.00 2.00 1.60 3.20 2.50 5.00 4.00 8.00 6.30 12.50 10.00 20.00 16.00 32.00 25.00 50.00 40.00 80.00 63.00 125.00 100.00 200.00 160.00 320.00 250.00 500.00 Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. 3 Bin ID A B C D H J Yellow/Amber Color Bins[1] Dom. Wavelength [nm] MIN. MAX. 581.5 585.0 584.0 587.5 586.5 590.0 589.0 592.5 591.5 595.0 594.0 597.5 For HSMC, HSMH, HSMS, HSMZ (Red Color) No color binning available. RELATIVE INTENSITY 1.0 AlGaAs RED GREEN HIGH EFFICIENCY RED 0.5 YELLOW 0 500 550 600 650 700 750 WAVELENGTH – nm Figure 1. Relative Intensity vs. Wavelength. YELLOW AlGaAs RED 20 15 HER GREEN 10 5 0 1.0 1.5 2.0 2.5 Figure 2. Forward Current vs. Forward Voltage. 10° 1.2 1.0 0.8 0.6 0.4 0.2 0 5 10 15 Figure 3. Relative Luminous Intensity vs. DC Forward Current. 0° 1.0 0.8 50° 0.6 60° 70° 80° 90° 0.4 0.2 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT – DEGREES Figure 5. HSMx-C660 Intensity vs. Angle, Vertical Axis. 4 NORMALIZED INTENSITY 30° 40° 20 25 IDC – DC FORWARD CURRENT – mA VF – FORWARD VOLTAGE – V 20° 1.4 0 3.0 IF – FORWARD CURRENT – mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) IE – FORWARD CURRENT – mA 25 30 1.6 30 25 20 15 10 5 0 0 20 40 60 80 100 TA – AMBIENT TEMPERATURE – °C Figure 4. Maximum DC Current vs. Ambient Temperature. 10 to 20 SEC. 255 °C (+5/-0) TEMPERATURE 217 °C 3 °C/SEC. MAX. 6 °C/SEC. MAX. 140 - 160 °C 60 to 150 SEC. MAX. 120 SEC. TIME * THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX. Figure 6. Recommended Pb-Free Reflow Soldering Profile. 0.9 0.2 0.9 5.0 2.0 RWS CENTER 1.5 USER FEED DIRECTION HSMx-C660 SERIES EMITTED DIRECTION CATHODE SIDE MOUNTING EXAMPLE FOR HSMx-C660 SERIES PRINTED LABEL Figure 7. Recommended Solder Patterns. Figure 8. Reeling Orientation for the HSMx-C660. 5 8.0 ± 1.0 (0.315 ± 0.039) 10.50 ± 1.0 (0.413 ± 0.039) Ø 20.20 MIN. (Ø 0.795 MIN.) Ø 13.1 ± 0.5 (Ø 0.516 ± 0.020) 3.0 ± 0.5 (0.118 ± 0.020) 59.60 ± 1.00 (2.346 ± 0.039) 178.40 ± 1.00 (7.024 ± 0.039) 4.0 ± 0.5 (0.157 ± 0.020) 6 PS 5.0 ± 0.5 (0.197 ± 0.020) Figure 9. Reel Dimensions. Ø 4.00 ± 0.10 (0.157 ± 0.004) 1.50 + 0.10 0 (0.059 + 0.004) 0 1.20 CATHODE 0.20 1.75 ± 0.10 (0.069 ± 0.004) 3.50 ± 0.05 (0.138 ± 0.002) DIM. A (SEE TABLE) DIM. B (SEE TABLE) 8.00 ± 0.30 (0.315 ± 0.012) USER FEED DIRECTION Ø1.1 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) Part Number DIM. A ± 0.10 (0.004) DIM. B ± 0.10 (0.004) HSMx-C660 3.35 2.30 Figure 10. Tape Dimensions. 6 END MOUNTED WITH THERE SHALL BE A COMPONENTS MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. START THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. 150 mm-360 mm (5.9 - 14.2 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Figure 11. Tape Leader and Trailer Dimensions. Storage Condition: 5 to 30°C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been opened for more than 1 week Baking recommended condition: 60 +/– 5°C for 20 hours. 7 www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2003 Agilent Technologies, Inc. Obsoletes 5988-4446EN October 7, 2003 5989-0165EN