HSMR-C280

HSMR-C280 Miniature ChipLED Data Sheet Features  LED with InGaN die  Surface mount device 0402 footprint  PCB package  Compatible with reflow soldering  Tape in 8mm carrier tape on a 7 inch diameter reel Applications  Backlighting  Indicator Package Dimensions Note: 1. 2. All dimensions are in millimeters (inches). Tolerance ±0.1mm (±0.004in) unless otherwise specified. Caution: LEDs are ESD sensitive device. Please observe appropriate precautions during handling and processing. Absolute Maximum Value at TA = 25°C Parameter InGaN Blue Unit Forward Current 20 mA Peak Pulsing Current2 100 mA Power Dissipation 78 mW LED Junction Temperature 95 °C Operating Temperature Range -30 to 85 °C Storage Temperature Range -40 to 85 °C 1 Note: 1. 2. Derate as shown in Figure 5. Pulse condition of 1/10 duty and 0.1ms width. Optical Characteristics at TA = 25°C, IF=20mA Color Luminous Intensity Peak Iv (mcd)1 Wavelength λp(nm) Blue Dominant Wavelength λd(nm)2 Viewing Angle 2θ1/23 Min Typ Typ Typ Typ 28.5 80.0 459 465 130 Note: 1. 2. 3. The luminous intensity is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. Viewing angle is the off axis angle where the luminous intensity is ½ the peak intensity. Electrical Characteristics at TA = 25°C, IF=20mA Color Forward Voltage Vf (V)1 Reverse Voltage Vr(V) @Ir=100μA Thermal 2 Resistance Rthj-pin(°C/W) Blue Min Max Min Typ 2.7 3.9 5 300 Note: 1. 2. Forward voltage tolerance is ±0.1V. Reverse voltage Indicates product final testing, long terms reverse bias is not recommended. Luminous Intensity Bin Limits Bin ID N P Q R S T U V W X Y Tolerance ±15% Blue Color Bin Limits Bin ID A B C D Tolerance ±1nm Forward Voltage Bin Limits Bin ID Z 1 2 3 4 5 Tolerance ±0.1V Luminous Intensity (mcd) Min 28.5 45.0 71.5 112.5 180.0 285.0 450.0 715.0 1125.0 1800.0 2850.0 Max 45.0 71.5 112.5 180.0 285.0 450.0 715.0 1125.0 1800.0 2850.0 4500.0 Dominant Wavelength (nm) Min 460 465 470 475 Max 465 470 475 480 Forward Voltage (V) Min 2.7 2.9 3.1 3.3 3.5 3.7 Max 2.9 3.1 3.3 3.5 3.7 3.9 20 18 FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 1 0.8 0.6 0.4 0.2 16 14 12 10 8 6 4 2 0 0 0 2 4 6 0 8 10 12 14 16 18 20 1 FORWARD CURRENT - mA Figure 1. Luminous Intensity vs Forward Current RELATIVE INTENSITY 2 3 4 FORWARD VOLTAGE - V Figure 2. Forward Current vs Forward Voltage 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 430 480 530 580 630 680 730 780 WAVELENGTH - nm Figure 3. Spectrum 22 20 Rj-a=500°C/W Rj-a=600°C/W Rj-a=700°C/W Rj-a=850°C/W FORWARD CURRENT - mA 18 16 14 12 10 8 6 4 2 0 0 Figure 4. Radiation pattern 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE - °C Figure 5. Derating curve 90 100 Figure 6. Recommended Pb free reflow solder profile Figure 8. Reel orientation Figure 9. Reel dimensions Figure 7. Recommended solder pad Figure 10. Tape dimensions PRECAUTIONARY NOTES 1. Handling of moisture sensitive device This product has a Moisture Sensitive Level 2a rating per JEDEC J-STD-020. Refer to Avago Application Note AN5305, Handling of Moisture Sensitive Surface Mount Devices, for additional details and a review of proper handling procedures. (a) Before use - An unopened moisture barrier bag (MBB) can be stored at