HSMW-A100-V40J1

HSMW-A10x-xxxxx White Surface Mount LED Indicator SMT PLCC-2 Data Sheet Description Features This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. • Industry standard PLCC-2 package (plastic leaded chip carrier) • High reliability LED package with silicone encapsulation • Tight white color binning • Wide viewing angle at 120˚ • Available in 8 mm carrier tape on 7-inch reel (2000 pieces) • Compatible with Reflow and TTW soldering process To facilitate easy pick & place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin. These LEDs are compatible with IR solder reflow process. The wide viewing angle at 120° makes these LEDs ideally suited for panel, push button, or general backlighting in automotive interior, office quipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in reflector pushing up the intensity of the light output, these LEDs are also suitable to be used as LED pixels in interior electronic signs. The super high brightness white PLCC-2 SMT LED is ideal for all kinds of backlighting applications in interior automotive, office automation, electrical appliance and industrial instrument markets to offer a clear and attractive product differentiation. The wide viewing angle at 120˚also enables this white PLCC-2 SMT LED to be used in localised area ambience lighting in applications such as vanity mirror light, cabin light, and car door puddle light. The white color backlighting offered by this series of white PLCC-2 SMT LED is suitable to backlight color LCD screen in applications such as GPS (global positioning system) screens in cars. Applications • Interior automotive – Instrument panel backlighting – Central console backlighting – Cabin backlighting • Office automation, home appliances, industrial equipment – Front panel backlighting – Push button backlighting – Display backlighting CAUTION: HSMW-A10x LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details. Package Dimensions 2.8 ± 0.2 2.2 ± 0.2 3.2 ± 0.2 1.9 ± 0.2 0.1 TYP. 0.8 ± 0.1 3.5 ± 0.2 0.8 ± 0.3 0.5 ± 0.1 CATHODE MARKING (ANODE MARKING FOR AlGaAs DEVICES) TOP MOUNT 2.8 ± 0.2 2.2 ± 0.2 1.9 ± 0.2 5.2 ± 0.2 3.2 ± 0.2 0.1 TYP. CATHODE MARKING 0.5 ± 0.1 REVERSE MOUNT NOTE: ALL DIMENSIONS IN MILLIMETERS. 2 Device Selection Guide Color Part Number Min. IV (mcd) Typ. IV (mcd) Max. IV (mcd) Test Current (mA) Dice Technology White HSMW-A100-U40H1 450.0 - 1125.0 20 InGaN HSMW-A100-U40J1 450.0 - 1125.0 20 InGaN HSMW-A100-V4MH1 715.0 - 1800.0 20 InGaN HSMW-A100-V40J1 715.0 - 1800.0 20 InGaN Notes: 1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. IV tolerance = ±12 %. Part Numbering System HSM x1 –A x2 x3x4 - x5x6 x7 x8x9 Packaging 0ption Color Bin Selection Intensity Bin Select Device Specific Configuration Package Type LED Chip Color Absolute Maximum Ratings (TA = 25°C) Parameters HSMW DC Forward Current[1] 30 mA Peak Forward Current[2] 90 mA Power Dissipation 114 mW Reverse Voltage 5V Junction Temperature 110°C Operating Temperature –40°C to +100°C Storage Temperature –40°C to +100°C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty factor = 10%, frequency = 1 kHz. 3 Optical Characteristics (TA = 25°C) Viewing Angle Luminous Total Flux/ Typ. Chromaticity 2q1/2[2] Efficiency, he Luminous Intensity Dice Coordinates[1] (Degrees) (lm/W) FV (lm) /IV (mcd) Color Part Number Technology x y Typ. Typ. Typ. White HSMW-A100 InGaN 0.31 0.31 120 18 2.4 White HSMW-A101 InGaN 0.31 0.31 120 9 2.4 Notes: 1.  The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device. 2.  θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. Electrical Characteristics (TA = 25°C) Part Forward Voltage, VF (Volts) @ IF = 20 mA Number Typ. Max. Reverse Voltage, VR @ 10 µA Min. Thermal Resistance RθJP (°C/W) HSMW 3.4 5 280 4.05 1.6 30 1.4 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 35 FORWARD CURRENT - mA 25 20 15 10 5 0 1.2 1.0 0.8 0.6 0.4 0.2 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 4.0 02 51 10 FORWARD VOLTAGE - V Figure 1. Forward Current vs. forward voltage 30 35 30 0.015 25 10 mA 0.010 CURRENT - mA Y-COORDINATES 25 35 5 mA 0.005 20 mA 0 20 15 10 -0.005 5 30 mA -0.002 -0.001 0 X-COORDINATES Figure 3. Chromaticity shift vs. currrent. Note: (x,y) values @ 20 mA reference to (0.0) 4 0 Figure 2. Relative intensity vs. forward current. 0.020 -0.010 -0.003 5 DC FORWARD CURRENT - mA 0.001 0.002 0.003 0 0 20 40 60 80 100 TEMPERATURE - °C Figure 4. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 110°C, RqJA = 500°C/W. 120 1.0 NORMALIZED INTENSITY 0.8 0.6 Note: Diameter "D" should be bigger than 2.3mm D 0.4 0.2 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 507 60 0 80 90 ANGULAR DISPLACEMENT - DEGREES Figure 5. Radiation pattern Figure 6. Recommended Pick and Place Nozzle Size 10 to 20 SEC. 217 °C 240°C MAX. 3°C/SEC. MAX. 100-150°C TEMPERATURE TEMPERATURE 20 SEC. MAX. 183°C -6 °C/SEC. MAX. 3°C/SEC. MAX. 120 SEC. MAX. +5 °C 255 °C -0 °C 3 °C/SEC. MAX. 125 °C ± 25 °C 6 °C/SEC. MAX. 60 to 150 SEC. MAX. 120 SEC. 60-150 SEC. TIME TIME * THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX. Figure 7a. Recommended SnPb reflow soldering profile Figure 7b. Recommended Pb-free reflow soldering profile Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components. 4.50 1.50 TURBULENT WAVE 250 HOT AIR KNIFE BOTTOM SIDE OF PC BOARD 200 TEMPERATURE - °C LAMINAR WAVE 2.60 TOP SIDE OF PC BOARD 150 FLUXING 100 50 30 0 PREHEAT 0 10 20 30 40 6 50 0 70 80 90 100 TIME - SECONDS CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN) PREHEAT SETTING = 150°C (100°C PCB) SOLDER WAVE TEMPERATURE = 245°C AIR KNIFE TEMPERATURE = 390°C AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.) AIR KNIFE ANGLE = 40° SOLDER: SN63; FLUX: RMA NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY COOLED BEFORE EXERTING MECHANICAL FORCE. Figure 8. Recommended wave soldering profile 5 SOLDER RESIST Figure 9. Recommended soldering pad pattern TRAILER COMPONENT LEADER 480 mm MIN. FOR 180 REEL. 960 mm MIN. FOR 330 REEL. 200 mm MIN. FOR 180 REEL. 200 mm MIN. FOR 330 REEL. C TRAILER COMPONENT LEADER 480 mm MIN. FOR 180 REEL. 960 mm MIN. FOR 330 REEL. 200 mm MIN. FOR 180 REEL. 200 mm MIN. FOR 330 REEL. A C USER FEED DIRECTION A USER FEED DIRECTION Figure 10. Tape leader and trailer dimension 4 ± 0.1 4 ± 0.1 2 ± 0.05 2.29 ± 0.1 1.75 ± 0.1 +0.1 1.5 -0 C 4 ± 0.1 4 ± 0.1 2 ± 0.05 2.29 ± 0.1 3.5 ± 0.05 3.81 ± 0.1 +0.3 8 - 0.1 1.75 ± 0.1 A +0.1 1.5 -0 C +0.1 1- 0 3.05 ± 0.1 3.5 ± 0.058° +0.3 8 - 0.1 3.81 ± 0.1 0.229 ± 0.01 A +0.1 1- 0 ± 0.1 Figure 11.3.05 Tape dimension 8° 0.229 ± 0.01 2 +0.5 -0 ∅ 20.5 ± 0.3 62.5 180 USER FEED DIRECTION +0 - 2.5 ∅ 13 ± 0.2 8.4 CATHODE SIDE +1.50 * - 0.00 14.4 ** LABEL AREA (111 mm x 57 mm) WITH DEPRESSION (0.25 mm) Figure 12. Reel dimensions 6 7.9 (MIN.) 10.9 (MAX.) * MEASURED AT OUTER EDGE ** MAX. MEASURED AT HUB PRINTED LABEL Figure 13. Reeling orientation Moisture Sensitivity This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. D. Control of assembled boards A. Storage before use E. Baking is required if: - Unopen moisture barrier bag (MBB) can be stored at