HSMY-C280

HSMx-C280 Miniature ChipLED Data Sheet Description Features The HSMx-C280 ChipLEDs are designed to 0402 (1.0 x 0.5 mm) industry standard footprint. They are extremely small in size and the low 0.4 mm height makes them very suitable for application in small portable hand held devices where real estate is a premium.         Six different colors are available: green, red, yellow, amber, and deep red. All parts are color and intensity binned except red color. They come in 8 mm paper tape on a 7 inch diameter reel with 4000 units per reel which makes them compatible for automatic placement. Device Selection Guide AS AlInGaP Product Number Color Package Description HSMA-C280 Amber Untinted, Diffused HSMC-C280 Red Untinted, Diffused HSMT-C280 Deep Red Untinted, Diffused Product Number Color Package Description HSMG-C280 Green Untinted, Diffused HSMS-C280 HER Untinted, Diffused HSMY-C280 Yellow Untinted, Diffused Extremely small size (1.0 x 0.5 x 0.4 mm) 0402 industry standard footprint Diffused optics Operating temperature range of –40°C to +85°C Compatible with IR soldering Available in 6 colors Available in 8 mm paper tape on 7" diameter reel Reel sealed in zip locked moisture barrier bags Applications      LCD backlighting Push button backlighting Front panel indicator Symbol backlighting Keypad backlighting GaP CAUTION: HSMx-C280 LEDs are Class 1A ESD sensitive per JESD22-A114C.01. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details. Package Dimensions LED DIE CATHODE MARK 0.5 (0.02) 1.0 (0.04) 0.25 (0.01) POLARITY DIFFUSED EPOXY 0.4 (0.016) PC BOARD 0.16 (0.006) CATHODE LINE 0.30 (0.012) 0.30 (0.012) 0.4 (0.016) MIN. SOLDERING TERMINAL NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED. 2 Absolute Maximum Ratings at TA = 25˚C Parameter HSMA/C/T-C280 HSMG/S/Y-C280 Units DC Forward Current [1] 25 20 mA Power Dissipation 60 52 mW Reverse Voltage (IR = 100 μA) 5 5 V LED Junction Temperature 95 95 ˚C Operating Temperature Range –40 to +85 –40 to +85 ˚C Storage Temperature Range –40 to +85 –40 to +85 ˚C Soldering Temperature See IR soldering profile (Figure 6 & 7) Notes: 1. Derate linearly as shown in Figure 4. Electrical Characteristics at TA = 25˚C Part Number Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. Reverse Breakdown VR (Volts) @ IR = 100 μA Min. Capacitance C (pF), VF = 0, f = 1 MHz Typ. Thermal Resistance RJ–PIN (˚C/W) Typ. HSMA-C280 1.9 2.4 5 11 300 HSMC-C280 1.9 2.4 5 15 300 HSMT-C280 1.9 2.4 5 45 300 HSMG-C280 2.2 2.6 5 9 250 HSMS-C280 2.1 2.6 5 5 250 HSMY-C280 2.1 2.6 5 6 250 Optical Characteristics at TA = 25˚C Part Number Color Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. Peak Wavelength peak (nm) Typ. Color, Dominant Wavelength d[2] (nm) Typ. Viewing Angle 2 1/2 Degrees[3] Typ. Luminous Efficacy V (lm/w) Typ. HSMA-C280 AS Amber 28.5 90 595 592 130 480 HSMC-C280 AS Red 28.5 90 637 626 130 155 HSMT-C280 AS Deep Red 11.2 30 660 639 130 70 HSMG-C280 GaP Green 4.5 15 570 572 130 595 HSMS-C280 HER 2.8 10 630 626 130 145 HSMY-C280 GaP Yellow 2.8 8 589 586 130 500 Notes: 1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, d, is derived from the CIE Chromatically Diagram and represents the perceived color of the device. 3.  1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3 Color Bin Limits[1] Light Intensity (Iv) Bin Limits[1] Intensity (mcd) Green Color Bins [1] Dom. Wavelength (nm) Min. Max. Bin ID Min. Max. A 0.11 0.18 A 561.5 564.5 B 0.18 0.29 B 564.5 567.5 C 0.29 0.45 C 567.5 570.5 D 0.45 0.72 D 570.5 573.5 E 0.72 1.10 E 573.5 576.5 F 1.10 1.80 G 1.80 2.80 H 2.80 4.50 J 4.50 7.20 K 7.20 11.20 Bin ID Dom. Wavelength (nm) Min. Max. L 11.20 18.00 A 582.0 584.5 M 18.00 28.50 B 584.5 587.0 N 28.50 45.00 C 587.0 589.5 P 45.00 71.50 D 589.5 592.0 Q 71.50 112.50 E 592.0 594.5 R 112.50 180.00 F 594.5 597.0 S 180.00 285.00 T 285.00 450.00 U 450.00 715.00 V 715.00 1125.00 W 1125.00 1800.00 X 1800.00 2850.00 Y 2850.00 4500.00 Bin ID Tolerance: ± 1 nm. Yellow/Amber Color Bins [1] Tolerance: ± 1 nm. Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. Tolerance: ± 15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. 4 1.0 AS RED AS AMBER 90 80 AS DEEP RED 70 AS ORANGE 60 50 40 30 GaP GREEN 0.8 RELATIVE INTENSITY RELATIVE INTENSITY - % 100 20 HER GaP YELLOW 0.6 0.4 0.2 10 550 600 650 WAVELENGTH 0 700 Figure 1a. Relative intensity vs. wavelength. 550 575 10 HER LPE GREEN GaP YELLOW 1 600 1.4 1.2 1.2 1.0 0.8 0.6 GaP 0.4 0 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 725 700 1.0 0.8 AS AMBER 0.6 AS RED and DEEP RED 0.4 0.2 0 0 5 10 15 20 25 30 0 5 10 15 Figure 3. Luminous intensity vs. forward current. 30 100 25 90 20 GaP 15 10 5 RqJ-A = 600°C/W 0 RELATIVE INTENSITY – % AS AlInGaP 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 TA – AMBIENT TEMPERATURE – °C 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 ANGLE Figure 4. Maximum forward current vs. ambient temperature. Figure 5. Relative intensity vs. angle. 20 25 IF – FORWARD CURRENT – mA IF – FORWARD CURRENT – mA VF – FORWARD VOLTAGE – V 5 675 1.4 0.2 Figure 2. Forward current vs. forward voltage. 650 625 Figure 1b. Relative intensity vs. wavelength. LUMINOUS INTENSITY (NORMALIZED AT 20 mA) AS AlInGaP 0 IF MAX. – MAXIMUM FORWARD CURRENT – mA 525 WAVELENGTH – nm 100 IF – FORWARD CURRENT – mA 500 - nm LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 0 500 30 10 - 30 SEC. TEMPERATURE TEMPERATURE 10 SEC. MAX. 230°C MAX. 4°C/SEC. MAX. 140-160°C –3°C/SEC. M 4°C/SEC. MAX. 217 °C 200 °C 255 - 260 °C 3 °C/SEC. MAX. 6 ° C/SEC. MAX. 150 °C 3 ° C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. OVER 2 MIN. TIME TIME Figure 6. Recommended reflow soldering profile. (Acc. to J-STD-020C) Figure 7. Recommended Pb-free reflow soldering profile. USER FEED DIRECTION 0.5 (0.02) CATHODE SIDE 0.5 (0.02) 0.5 (0.02) 0.5 (0.02) PRINTED LABEL Figure 8. Recommended soldering pattern for HSMx-C280. Figure 9. Reeling orientation. 8.0 ± 1.0 (0.315 ± 0.039) 10.50 ± 1.0 (0.413 ± 0.039) Ø 13.1 ± 0.5 (Ø 0.516 ± 0.020) Ø 20.20 MIN. (Ø 0.795 MIN.) 3.0 ± 0.5 (0.118 ± 0.020) 59.60 ± 1.00 (2.346 ± 0.039) 178.40 ± 1.00 (7.024 ± 0.039) 4.0 ± 0.5 (0.157 ± 0.020) 6 PS 5.0 ± 0.5 (0.197 ± 0.020) NOTE: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). Figure 10. Reel dimensions. 6 DIM. C (SEE TABLE 1) 4.00 (0.157) CATHODE 1.50 (0.059) 0.23 ± 0.05 (0.009 ± 0.002) 1.75 (0.069) 3.50 ± 0.05 (0.138 ± 0.002) DIM. A (SEE TABLE 1) 8.00 ± 0.30 (0.315 ± 0.012) DIM. B (SEE TABLE 1) 4.00 (0.157) COVER TAPE USER FEED DIRECTION 2.00 ± 0.05 (0.079 ± 0.002) TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) DIM. A DIM. B DIM. C ± 0.10 (± 0.004) ± 0.10 (± 0.004) ± 0.10 (± 0.004) PART NUMBER HSMx-C280 SERIES 1.10 (0.043) Figure 11. Tape dimensions. END THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT PUNCHED PAPER TAPE SEALED WITH COVER TAPE. START MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY PUNCHED PAPER TAPE SEALED WITH COVER TAPE. NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED. Figure 12. Tape leader and trailer dimensions. 7 CARRIER TAPE MINIMUM OF 230 mm (9.05 INCH) MAY CONSIST OF PAPER TAPE AND/OR COVER TAPE. 0.60 (0.024) 0.66 (0.026) Reflow Soldering: For more information on reflow soldering, refer to Application Note AN-1060, Surface Mounting SMT LED Indicator Components. Storage Condition: 5 to 30°C @ 60%RH max. Baking is required before mounting, if: 1. Humidity Indicator Card is > 10% when read at 23 ± 5°C. 2. Device expose to factory conditions