MSA-0505-TR1G

MSA-0505 Cascadable Silicon Bipolar MMIC Amplifier Data Sheet Description Features The MSA-0505 is a high performance medium power • Cascadable 50 Ω Gain Block silicon bipolar Monolithic Microwave Integrated Circuit • High Output Power: (MMIC) housed in a low cost, surface mount package. 18.0 dBm Typical P1 dB at 1.0 GHz This MMIC is designed for use as a general purpose 50Ω gain block. Typical applications include narrow and broad • Low Distortion: 29.0 dBm Typical IP3 at 1.0 GHz band IF and RF amplifiers in commercial systems. • 7.0 dB Typical Gain at 1.0 GHz The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which • Surface Mount Plastic Package uses nitride self-alignment, ion implantation, and • Tape-and-Reel Packaging Option Available gold metallization to achieve excellent performance, u niformity and reliability. The use of an external bias • Lead-free Option Available resistor for temperature and current stability also allows bias flexibility. 05 Plastic Package Typical Biasing Configuration R bias VCC > 12 V RFC (Optional) C block IN 1 4 3 MSA C block OUT Vd = 8.4 V 2 MSA-0505 Absolute Maximum Ratings Parameter Device Current Power Dissipation[,3] RF Input Power Junction Temperature Storage Temperature Absolute Maximum[1] 135 mA 1.5 W +5 dBm 00°C –65 to 150°C Thermal Resistance[2]: θjc = 85°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TCASE = 25°C. 3. Derate at 11.8 mW/°C for TC > 73°C. Electrical Specifications[1], TA = 25°C Symbol P1 dB Parameters and Test Conditions: Id = 80 mA, ZO = 50 Ω Output Power at 1 dB Gain Compression Power Gain (|S1| ) Gain Flatness 3 dB Bandwidth[] Input VSWR Output VSWR Third Order Intercept Point 50 Ω Noise Figure Group Delay Device Voltage Device Voltage Temperature Coefficient f = 0.5 GHz f = 1.0 GHz f = 0.5 GHz f = 1.0 GHz f = 0.1 to 1.5 GHz f = 0.1 to 1.5 GHz f = 0.1 to 1.5 GHz f = 1.0 GHz f = 1.0 GHz f = 1.0 GHz Units dBm dBm dB dB GHz Min. 16.0 6.0 Typ. 19.0 18.0 7.5 7.0 ±0.75 .3 1.6:1 .0:1 9.0 6.5 190 8.4 –16.0 Max. GP ∆GP f3 dB VSWR IP3 NF tD Vd dV/dT dBm dB psec V mV/°C 6.7 10.1 Notes: 1. The recommended operating current range for this device is 60 to 100 mA. Typical performance as a function of current is on the following page. 2. Referenced from 0.1 GHz Gain (GP). Ordering Information Part Numbers MSA-0505-STR MSA-0505-STRG MSA-0505-TR1 MSA-0505-TR1G No. of Devices 10 100 500 500 Comments Bulk Bulk 7" Reel 7" Reel Note: Order part number with a “G” suffix if lead-free option is desired.  MSA-0505 Typical Scattering Parameters (TA = 25°C, Id = 80 mA) Freq. MHz S11 Mag Ang dB S21 Mag Ang dB S1 Mag S22 Ang Mag Ang k 5 5 50 100 00 400 600 800 1000 1500 000 500 3000 .56 .4 .15 .13 .1 .1 .13 .13 .14 .1 .30 .40 .5 –39 –103 –130 –155 –170 178 17 168 166 159 148 136 11 14.9 9.7 8. 7.8 7.7 7.5 7.4 7. 7.0 6.4 5. 4.1 .7 5.56 3.05 .57 .45 3.43 .37 .34 .9 .4 .09 1.8 1.60 1.36 161 156 163 165 161 148 134 119 105 7 4 17 –7 –18.5 –13.9 –13.7 –13.7 –13.5 –13.6 –13.6 –13.6 –13.4 –13.3 –13.1 –1.9 –1.6 .10 .0 .07 .07 .11 .09 .09 .09 .13 .17 . .7 .34 39 1 7 3 1 –1 – –3 –4 –6 –9 –11 –16 .65 .5 .15 .11 .11 .14 .17 .1 .5 .34 .4 .48 .55 –36 –90 –116 –13 –145 –146 –151 –157 –164 176 159 146 133 0.60 0.97 1.15 1.1 1.1 1.3 1.3 1.3 1.1 1.16 1.1 1.05 0.9 Typical Performance, TA = 25°C (unless otherwise noted) 10 120 TC = +85C TC = +25C TC = –25C P1 dB (dBm) 22 8 GAIN (dB) 0.1 GHz 90 20 0.5 GHz Id (mA) 6 18 0.5 GHz 60 4 1.5 GHz 2.0 GHz 1.0 GHz 16 1.0 GHz 2 30 14 2.0 GHz 0 +25 +85 0 8 10 12 14 16 18 20 22 24 0 0 3 6 Vd (V) 9 12 12 –25 POWER OUT (dBm) TEMPERATURE (C) Figure 1. Typical Gain vs. Power Out, TA = 25°C, Id = 80 mA. 14 Figure 2. Device Current vs. Voltage. Figure 3. Output Power at 1 dB Gain Compression, vs. Case Temperature, Id = 80 mA. 34 IP3 (dBm) 12 10 Gp (dB) 8 6 4 2 0 .01 .05 0.1 0.5 1.0 5.0 FREQUENCY (GHz) 30 IP3 26 22 P1 dB (dBm) 18 P1 dB 14 60 70 80 Id (mA) 90 100 Figure 4. Gain vs. Frequency, Id = 80 to 100 mA. Figure 5. Output Power at 1 dB Gain Compression, Third Order Intercept vs. Case Temperature, f = 1.0 GHz. 3 05 Plastic Package Dimensions GROUND 4 0.030 0.89 RF INPUT 5 1 0.030 DIA 0.76 RF OUTPUT AND DC BIAS 3 0.030 ± 0.010 0.76 ± 0.25 (4 PLCS) GROUND 2 0.135 ± 0.015 3.42 ± 0.25 (4 PLCS) 0.030 0.76 0.050 1.27 0.020 0.51 0.008 ± 0.002 0.20 ± 0.05 0.145 3.68 0.100 ± 0.010 2.54 ± 0.25 Notes: (unless otherwise specified) 1. Dimensions are in 2. Tolerances in .xxx = 0.005 mm .xx = 0.13 mm 0.0005 ± 0.010 (0.013 ± 0.25) For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 008 Avago Technologies, Limited. All rights reserved. Obsoletes 5989-754EN AV0-17EN May 14, 008