MSA-0711-BLK

MSA-0711 Cascadable Silicon Bipolar MMIC Amplifier Data Sheet Description The MSA-0711 is a low cost silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in the surface mount plastic SOT-143 package. This MMIC is designed for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial and industrial applications. The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. Features • Cascadable 50 Ω Gain Block • 3 dB Bandwidth: DC to 1.9 GHz • 12.0 dB Typical Gain at 1.0 GHz • Unconditionally Stable (k>1) • Low Cost Surface Mount Plastic Package • Tape-and-Reel Packaging Option Available • Lead-free Option Available SOT-143 Package Typical Biasing Configuration R bias VCC > 5 V RFC (Optional) C block C block MSA Pin Connections and Package Marking IN OUT Vd = 3.8 V A07x Notes: Top View. Package Marking provides orientation and identification. "x" is the date code. MSA-0711 Absolute Maximum Ratings Parameter Device Current Power Dissipation[2,3] RF Input Power Junction Temperature Storage Temperature Absolute Maximum[1] 50 mA 175 mW +13 dBm 150°C –65 to 150°C Thermal Resistance[2]: θjc = 505°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TCASE = 25°C. 3. Derate at 2.0 mW/°C for TC > 62°C. Electrical Specifications[1], TA = 25°C Symbol GP ∆GP f3 dB VSWR Parameters and Test Conditions: Id = 22 mA, ZO = 50 Ω Power Gain (|S21| 2) Gain Flatness 3 dB Bandwidth Input VSWR Output VSWR 50 Ω Noise Figure Output Power at 1 dB Gain Compression Third Order Intercept Point Group Delay Device Voltage Device Voltage Temperature Coefficient f = 0.1 GHz f = 1.0 GHz f = 0.1 to 1.3 GHz f = 0.1 to 2.0 GHz f = 0.1 to 2.0 GHz f = 1.0 GHz f = 1.0 GHz f = 1.0 GHz f = 1.0 GHz TC = 25°C Units dB dB GHz dB dBm dBm psec V mV/°C Min. 10.0 3.0 Typ. 13.0 12.0 ±0.8 3.2 1.5:1 1.5:1 5.0 5.5 18.0 145 3.8 –7.0 Max. NF P1 dB IP3 tD Vd dV/dT 4.6 Note: 1. The recommended operating current range for this device is 15 to 30 mA. Typical performance as a function of current is on the following page. Ordering Information Part Numbers MSA-0711-BLK MSA-0711-BLKG MSA-0711-TR1 MSA-0711-TR1G MSA-0711-TR2 MSA-0711-TR2G Note: No. of Devices 100 100 3000 3000 10000 10000 Comments Bulk Bulk 7" Reel 7" Reel 13" Reel 13" Reel Order part number with a “G” suffix if lead-free option is desired. 2 MSA-0711 Typical Scattering Parameters (ZO = 50 Ω, TA = 25°C, Id = 22 mA) Freq. GHz S11 Mag Ang dB S21 Mag Ang dB S12 Mag Ang Mag S22 Ang 0.1 0.2 0.4 0.6 0.8 1.0 1.5 2.0 2.5 3.0 3.5 4.0 .03 .04 .04 .05 .07 .08 .13 .18 .25 .32 .38 .42 1 1 –4 –19 –32 –44 –88 –130 –155 –178 165 152 13.0 12.9 12.8 12.6 12.3 12.0 10.9 9.8 8.6 7.2 5.8 4.5 4.47 4.42 4.38 4.28 4.14 3.99 3.52 3.08 2.68 2.30 1.96 1.68 174 168 157 146 135 123 98 75 61 42 26 12 –18.6 –18.5 –18.4 –18.1 –17.7 –17.4 –16.1 –15.2 –14.7 –14.7 –14.8 –14.7 .118 .119 .120 .125 .130 .135 .157 .173 .184 .185 .181 .184 1 2 4 9 10 12 13 8 9 5 3 1 .19 .19 .19 .19 .20 .19 .19 .18 .18 .17 .17 .20 –8 –18 –36 –52 –68 –82 –113 –138 –151 –158 –150 –142 Typical Performance, TA = 25°C (unless otherwise noted) 14 12 10 Gain Flat to DC 16 14 12 0.1 GHz 1.0 GHz 7 6 P1 dB (dBm) G p (dB) G p (dB) 8 6 4 2 0 0.1 0.3 0.5 1.0 3.0 6.0 2.0 GHz 10 8 6 4 10 20 30 I d (mA) 40 5 4 3 2 0.1 0.2 0.3 0.5 1.0 2.0 FREQUENCY (GHz) FREQUENCY (GHz) Figure 1. Power Gain vs. Frequency, Id = 22 mA. Figure 2. Power Gain vs. Current. Figure 3. Output Power at 1 dB Gain Compression vs. Frequency, Id = 22 mA. 6.5 6.0 NF (dB) 5.5 5.0 4.5 0.1 0.2 0.3 0.5 1.0 2.0 FREQUENCY (GHz) Figure 4. Noise Figure vs. Frequency, Id = 22 mA. 3 SOT-143 Package Dimensions e2 GROUND e1 RF OUTPUT AND BIAS B1 E XXX E1 L RF INPUT e D GROUND B C DIMENSIONS (mm) SYMBOL A A1 B B1 C D E1 e e1 e2 E L MIN. 0.79 0.013 0.36 0.76 0.086 2.80 1.20 0.89 1.78 0.45 2.10 0.45 MAX. 1.097 0.10 0.54 0.92 0.152 3.06 1.40 1.02 2.04 0.60 2.65 0.69 A A1 Notes: XXX-package marking Drawings are not to scale For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies, Limited. All rights reserved. Obsoletes 5989-4454EN AV02-0790EN - October 31, 2007 4