MSA-2111-BLK

MSA-2111 Cascadable Silicon Bipolar MMIC Amplifier Data Sheet Description The MSA-2111 is a low cost silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in a surface mount plastic SOT-143 package. This MMIC is designed for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial and industrial applications. The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. Features • Cascadable 50 Ω Gain Block • Medium Power: 10 dBm at 900 MHz • High Gain: 16.5 dB Typical at 900 MHz • Low Noise Figure: 3.3 dB Typical at 900 MHz • Low Cost Surface Mount Plastic Package • Tape-and-Reel Packaging Option Available • Lead-free Option Available SOT-143 Package Typical Biasing Configuration R bias VCC > 5 V RFC (Optional) C block C block MSA Pin Connections and Package Marking IN OUT Vd = 3.6 V A06x Notes: Top View. Package Marking provides orientation and identification. "x" is the date code. MSA-2111 Absolute Maximum Ratings Parameter Device Current Power Dissipation[2,3] RF Input Power Junction Temperature Storage Temperature Absolute Maximum[1] 40 mA 125 mW +13 dBm 150°C –65°C to 150°C Thermal Resistance[2]: θjc = 505°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TCASE = 25°C. 3. Derate at 2.0 mW/°C for TC > 85°C. Electrical Specifications[1], TA = 25°C Symbol GP ∆GP f3 dB VSWR Parameters and Test Conditions: Id = 29 mA, ZO = 50 Ω Power Gain (|S21| 2) Gain Flatness 3 dB Bandwidth Input VSWR Output VSWR 50 Ω Noise Figure Output Power at 1 dB Gain Compression Third Order Intercept Point Group Delay Device Voltage Device Voltage Temperature Coefficient f = 900 MHz f = 0.1 to 0.3 GHz f = 0.1 to 2.5 GHz f = 0.1 to 2.5 GHz f = 900 MHz f = 900 MHz f = 900 MHz f = 900 MHz Units dB dB GHz dB dBm dBm psec V mV/°C Min. 16.0 2.9 Typ. 17.5 ±0.5 0.5 1.8:1 1.8:1 3.3 10 20 158 3.6 –8.0 Max. NF P1 dB IP3 tD Vd dV/dT 4.3 Notes: 1. The recommended operating current range for this device is 12 to 35 mA. Typical gain performance as a function of current is on the following page. Ordering Information Part Numbers MSA-2111-BLK MSA-2111-BLKG MSA-2111-TR1 MSA-2111-TR1G MSA-2111-TR2 MSA-2111-TR2G No. of Devices 100 100 3000 3000 10000 10000 Comments Bulk Bulk 7" Reel 7" Reel 13" Reel 13" Reel Note: Order part number with a “G” suffix if lead-free option is desired. 2 MSA-2111 Typical Scattering Parameters (ZO = 50 Ω, TA = 25°C, Id = 29 mA) Freq. GHz S11 Mag Ang dB S21 Mag Ang dB S12 Mag Ang Mag S22 Ang k 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5 2.0 2.5 3.0 3.5 4.0 .28 .26 .24 .21 .18 .15 .13 .11 .09 .07 .08 .11 .15 .27 .38 .46 171 163 156 152 149 148 148 152 158 169 –123 –124 –167 158 145 135 23.0 22.5 21.9 21.2 20.5 19.7 19.0 18.3 17.6 16.9 14.0 11.8 10.1 8.3 6.8 5.6 14.1 13.4 12.5 11.5 10.6 9.7 8.9 8.2 7.6 7.0 5.0 3.9 3.2 2.6 2.2 1.9 167 156 145 136 128 120 114 108 102 98 79 63 56 43 32 21 –26.0 –25.5 –24.9 –24.0 –23.4 –22.6 –21.8 –21.1 –20.4 –19.9 –17.3 –15.5 –14.3 –13.5 –13.1 –12.6 .050 .053 .057 .063 .068 .074 .081 .088 .095 .101 .136 .167 .193 .211 .222 .234 9 18 25 30 35 38 40 42 43 44 45 42 43 38 34 30 .27 .27 .26 .26 .24 .24 .22 .21 .20 .19 .10 .06 .06 .12 .16 .17 177 175 173 171 170 169 169 169 168 169 179 –147 –177 149 145 144 1.03 1.03 1.03 1.03 1.03 1.03 1.04 1.04 1.04 1.05 1.06 1.08 1.10 1.13 1.14 1.14 Typical Performance, TA = 25°C (unless otherwise noted) 25 22 19 Gain Flat to DC 25 20 15 2.0 GHz 0.1 GHz 0.5 GHz 0.9 GHz 14 12 GP (dB) GP (dB) 16 13 10 7 4 0.1 0.3 0.5 1.0 3.0 6.0 P1 dB (dBm) 10 10 5 0 10 15 20 25 I d (mA) 30 8 6 0.1 0.2 0.3 0.5 1.0 2.0 FREQUENCY (GHz) Figure 1. Power Gain vs. Frequency, Id = 29 mA. Figure 2. Power Gain vs. Current. Figure 3. Output Power at 1 dB Gain Compression vs. Frequency, Id = 29 mA. FREQUENCY (GHz) 4.0 3.5 NF (dB) 3.0 2.5 0.1 0.2 0.3 0.5 1.0 2.0 FREQUENCY (GHz) Figure 4. Noise Figure vs. Frequency, Id = 29 mA. 3 SOT-143 Package Dimensions e2 GROUND e1 RF OUTPUT AND BIAS B1 E XXX E1 L RF INPUT e D GROUND B C DIMENSIONS (mm) SYMBOL A A1 B B1 C D E1 e e1 e2 E L MIN. 0.79 0.013 0.36 0.76 0.086 2.80 1.20 0.89 1.78 0.45 2.10 0.45 MAX. 1.097 0.10 0.54 0.92 0.152 3.06 1.40 1.02 2.04 0.60 2.65 0.69 A A1 Notes: XXX-package marking Drawings are not to scale For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies, Limited. All rights reserved. Obsoletes 5989-4455EN AV02-0792EN - October 30, 2007 4