SX03-0B00-00

Product Brief SAS35xR Series of Expanders Power-Optimized, Entry-Level Avago 12 Gb/s SAS/SATA SAS35x36R, SAS35x28R, SAS35x24R Expanders The industry’s most trusted SATA+SAS expanders enable space-constrained enterprise systems with the scalability and fault tolerance they demand. Applications • SAS/SATA drive enclosures 
 • External RAID subsystems 
 • JBOD architectures 
 Broadcom offers the industry’s broadest portfolio of storage solutions, backed by decades of experience and trusted by the world’s leading server and storage suppliers. Broadcom provides the building blocks for storage solutions that help customers understand, prioritize, store and protect critical data. The Avago 12 Gb/s SAS portfolio includes MegaRAID® controller cards, host bus adapters (HBAs), advanced software options, and SAS storage ICs, including RAID-on-Chip (ROCs), I/O controllers and expanders. • Server backplanes 
 Overview Key Features The SAS35xR expanders are the second series of high performance 12 Gb/s SAS expanders that utilize a new, power-optimized design to deliver best in class power utilization and the latest enhancements in SAS technology. The 36-, 28- and 24-port expanders offer a smaller footprint and are equipped with an integrated ARM Cortex-R4 processor for system initialization, LED management, enclosure management, and topology management functions such as discovery. The SAS35xR expanders support end device SAS data transfer rates of 12, 6, 3 Gb/s, and SATA data transfer rates of 6 and 3 Gb/s. • Integrated enclosure processor ––ARM Cortex-R4 @ 300 MHz • 12 Gb/s SAS interface ––36-, 28-, 24-port SAS/SATA expanders 
 ––Supports 12 Gb/s, 6 Gb/s, and 3 Gb/s SAS, and 6 Gb/s and 3 Gb/s SATA data transfer rates
 ––Ports are non-denominational initiator and target connect 
 ––Supports narrow and wide port configurations 
 ––Spread Spectrum Clocking 
 Representing the eighth generation of SAS expanders, the SAS35xR series adds a suite of enhanced power management features encompassing the ability to create vendor-unique SMP or SES commands. Firmware features include: • SAS PHY Power Conditions • Partial and Slumber Power Management • Wake-In-Band and Enter/Exit Chip Wide-Low Power modes. ––Supports SSP initiator and target, SMP initiator and target, STP initiator and SATA protocols 
 ––DataBolt Bandwidth Optimizer (all ports) 
 SAS35xR Series of Expanders Product Brief Key Features (cont.) • T-10 zoning – 255 zones 
 • Port mirroring 
 • 16 GPIO Pins (64 total, including multiplexed GPIOs) 
 • 1 LED Pin per PHY ––Configurable for link status, drive activity, fault LED outputs 
 ––Can be used as GPIOs 
 • SFF-8485 Compliant (2 SGPIO ports) 
 • External memory interface support 
 • Communication Interfaces ––Five I2C interfaces for enclosure management services or debug 
 ––Two UART interfaces for debug as well as an out of band communication port 
 The innovative and unique DataBolt bandwidth optimizer is carried forward from the prior generation expander and enhanced to provide robust 12 Gb/s performance while preserving prior investments in SAS and SATA devices. By buffering data received at 6 or 3 Gb/s rates and bursting to the host at 12 Gb/s speeds, the SAS35xR expanders with the DataBolt technology cost-effectively ease the transition to 12 Gb/s SAS technology and extend the longevity of the existing infrastructure. The SAS35xR expanders support scalability and the fault-tolerant path redundancy needed by today’s data centers, enterprise servers and storage subsystems. While connecting multiple targets and hosts in a switched SAS environment, the SAS35xR expanders improve system performance and reliability in feature-rich, power-efficient and industry-trusted offerings. SDK The comprehensive Avago SAS35 Software Development Kit (SDK) is available to facilitate efficient OEM specific firmware implementations. The SDK includes source code for the SES module with examples of typical SES device drivers as well as the SSP Target, the I²C Target, the CLI Interface, and the Serial Debug port. API support for Hardware Abstraction Layer (HAL) functions is included, covering SSP and SMP Target and Initiator, STP Initiator, UART, I²C Master and Slave, LED management for both GPIO and SGPIO, Configuration Page Management, PHY configuration and control, firmware event logging, firmware tracing and more. 24-Drive RAID/JBOD RAID Controller RAID Controller • JTAG support 
 • 28nm, FPB4NGS, 27 mm x 27 mm
 4 4 4 Avago SAS35x36R 4 Avago SAS35x36R Up to 24 SAS/SATA Drives 4 Enclosure Functions • LED Control • Temp Monitoring • Drive/Array Control • Fan Control/Monitor • Power Supply Control/Monitor • Alarms/Notifications 4 Product Brief SAS35X36R, SAS35X28R, SAS35X24R Expander Technical Specifications SEP ARM Cortex R4 300 MHz Instructions 1.6 DMIPs/MHz Internal Memory 2 MB SRAM SAS Ports 36, 28, 24 Data Transfer 12.0/6.0/3.0 Gb/s SAS 6.0/3.0 Gb/s SATA DataBolt Bandwidth Optimizer (EDFB) All ports (LSI IP) SSC (Spread Spectrum Clocking ) Y Port Mirroring Y (LSI IP) Direct, Table, & Subtractive Routing Methods Y Route Table Entries 2048 PHY Based Zoning, T-10 Zoning Y T-10 Optical Support Y A/D Converter 1, (2 analog inputs) Pulse Width Modulator 2 External Memory Interfaces 8/16-bit Flash, with 6 chip selects SRAM, NVSRAM Security Features TRNG/Hash & HMAC Generator/Secret Root Key 8-bit SEP interface Y I2C Interfaces 5 SGPIO interface 2, SFF- 8485 UART Interfaces 2 LED 1 LED pin per PHY GPIO 16 Package 28n, FPB4NGS, (27 mm x 27 mm) Ordering Information Product OPN SAS35x36R SX03-0B00-00 SAS35x28R SX04-0B00-00 SAS35x24R SX05-0B00-00 Visit the Broadcom Server Storage website at: avagotech.com/server-storage Broadcom, the pulse logo, connecting everything, and Avago Technologies, and MegaRAID are among the trademarks of Broadcom. Copyright © 2016 Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Limited and/or its subsidiaries. For more information, please visit www.broadcom.com. BC00-0439EN 09.13.16