VMMK-1225-TR1G

VMMK-1225 0.5 to 26 GHz Low Noise E-PHEMT in a Wafer Scale Package Data Sheet Description Features Avago Technologies has combined it’s industry leading E-pHEMT technology with a revolutionary chip scale package. The VMMK-1225 can produce an LNA with high dynamic range, high gain and low noise figure that operates off of a single position DC power supply. The GaAsCap wafer scale sub-miniature leadless package is small and ultra thin, yet can be handled and placed with standard 0402 pick and place assembly. • Sub-miniature 0402 (1mm x 0.5mm) The use of 0.25 micron gates allow a ultra low noise figure (below 1dB from 500 MHz to 12 GHz) with respectable associated gain. With a flat transconductance over bias and frequency the VMMK-1225 provides excellent linearity of over 22 dBm and power over 10 dBm at one dB compression. This product is easy to use since it requires only positive DC voltages for bias and low matching coefficients for simple impedance matching to 50 Ω systems. The VMMK-1225 is intended for any 500MHz to 26.5GHz application including 802.11abgn WLAN, WiMax, BWA 802.16 & 802.20 and military applications. WLP 0402, 1mm x 0.5mm x 0.25 mm Surface Mount Leadless Package • Low height (0.25mm) • Frequency Range DC to 26.5 GHz • Enhancement Mode[1] • 0.25 micron gate length • Tape and Reel packaging option available Specifications • 0.87dB Fmin • 11dB Ga • +23 dBm output 3rd order intercept • +8 dBm output power Applications • 2.4 GHz, 3.5GHz, 5-6GHz WLAN and WiMax notebook computer, access point and mobile wireless applications • DBS 10 to 13 GHz receivers YY •A • VSAT and SATCOM 13 to 18 GHz systems Gate • AYY Pin Connections (Top View) Notes: Top view package marking provides orientation gate source Notes: “A” = Device Code “YY” = Year Code drain Drain • 802.16 & 802.20 BWA systems • WLL and MMDS Transceivers • General purpose discrete E-pHEMT for other ultra low noise applications Notes: 1. The Avago enhancement mode pHEMT devices do not require a negative gate bias voltage as they are “normally off”. They can help simplify the design and reduce the cost of receivers and transmitters in many applications from 500 MHz to 18 GHz Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 20 V (class A) ESD Human Body Model = 100 V (Class O) Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control. VMMK-1225 Absolute Maximum Ratings Sym Parameters/Condition Unit Max Vds Drain-Source Voltage[2] V 5 Vgs Gate-Source Voltage[2] V -5 to 1 Vgd Gate-Drain Voltage[2] V -5 to 1 Ids Drain Current[2] mA 50 Igs Gate Current mA 0.8 Pdn Total Power Dissipation[3] mW 250 Pin RF CW Input Power Max dBm 10 Tch Max channel temperature C +150 θjc Thermal Resistance[4] 200 C/W Notes: 1. Operation in excess of any of these conditions may result in permanent damage to this device. 2. Assumes DC quiescent conditions 3. Ambient operational temperature TA=25 °C unless otherwise noted. 4. Thermal resistance measured using 150 °C Liquid Crystal Measurement Method 5. The device can handle + 10 dBm RF input power provided lgs is limited to 1 mA 55 VGS=0.900 50 VGS=0.850 45 VGS=0.800 40 lDS (mA) 35 VGS=0.750 30 VGS=0.700 25 VGS=0.650 20 15 VGS=0.600 10 VGS=0.550 5 VGS=0.500 VGS=0.450 VGS=0.400 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VDS (V) 4.0 4.5 5.0 5.5 6.0 6.5 Figure 1. Typical I-V Curves. (VGS=0.05 V per step) VMMK-1225 RF Specifications (on board) [6,7] TA = 25°C, Freq = 12 GHz, Vds = 2V & Ids = 20mA (unless otherwise specified) Sym Parameters/Condition Units Min Typ. Max Vgs Gate Voltage V 0.58 0.68 0.78 Igs Gate Current uA 2.0 Gm Transconductance mS 120 Ga Associated Gain dB NF Noise Figure Fmin 11 12.2 dB 1.0 2.3 Noise Figure min dB 0.87 P-1dB 1dB Compressed Output Power dBm +8 OIP3 Output 3rd Order Intercept Point dBm +23 Notes: 6. Specifications are derived from measurements in a test circuit. 7. All tested parameters guaranteed with measurement accuracy ± 0.5 dB for gain. 2 8.7 Product Consistency Distribution Charts [1] Figure 2. Gate Voltage @ Vds = 2V & Ids = 20mA, LSL=0.58, Nominal=0.67, USL=0.78, CPK=1.957 Figure 3. Gain @ 12 GHz, LSL=8.7, Nominal=10.4, USL=12.2, CPK=1.7 Figure 4. NF @ 12 GHz, Nominal=1.52, USL=2.3,CPK=1.55 Note: 1. Distribution data based at least 500 part sample size from two wafers during initial characterization of this product. Future wafers allocated to this product may have nominal values anywhere between upper and lower limits. 20.00 30 16.00 26 OIP3 (dBm) S21 (dB) VMMK-1225 Typical Performance Curve 12.00 8.00 0 5 10 15 20 FREQUENCY (GHz) 25 10 30 Figure 5. S21 vs. Frequency at 2V, 20mA P1dB (dBm) Fmin (dB) 6 10 Ids (mA) 14 18 22 10 1.00 0.80 0.60 0.40 8 6 1.5V 2V 3V 4V 4 0.20 0.00 0 5 10 FREQUENCY (GHz) Figure 7. Fmin vs. Frequency at 2V, 20mA 16 2 12 1.20 20 1.5V 2V 3V 4V Figure 6. OIP3 and Ids at 12 GHz 1.40 3 18 14 4.00 0.00 22 15 20 2 2 6 Figure 8. P1dB vs. Ids at 12 GHz 1.2 0.9 10 Ids (mA) 14 18 22 0.00 0 5 10 FREQUENCY (GHz) 15 2 20 2 6 10 Ids (mA) 14 18 22 VMMK-1225 Typical Performance Curve 1.2 20 16 0.9 Fmin (dB) GAIN (dB) 12 8 1.5V 2V 3V 4V 4 0 2 6 10 14 18 0.6 0.3 5mA 10mA 15mA 0 0 22 4 Ids (mA) Figure 9. Gain vs. Ids at 12 GHz 13 12.5 12 S21 (dB) S21 (dB) 12 11.5 11 -40C 25C 10.5 10 15 Id (mA) 20 20 25 OIP3 (dBm) OIP3 (dBm) 30 15 10 -40C 25C 85C 10 15 Id (mA) Figure 13. OIP3 vs. Ids at 12 GHz over temp at 2V 10 15 Id (mA) 20 25 Figure 12. S21 vs. Ids at 12 GHz over temp at 3V 25 5 -40C 25C 85C 5 25 5 4 10 8 Figure 11. S21 vs. Ids at 12 GHz over temp at 2V 0 20 11 9 85C 10 0 16 Figure 10. NFmin vs. Frequency at 2V 13 5 8 12 FREQUENCY GHz 20 20 15 10 -40C 25C 85C 5 25 0 0 5 10 15 Id (mA) Figure 14. OIP3 vs. Ids at 12 GHz over temp at 3V 20 25 VMMK-1225 Typical Scattering Parameters and Noise Parameters, TA=25°C, Vds=2V, Ids=20mA [1] Freq GHz S11 Mag. Ang. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 0.95 0.92 0.88 0.85 0.81 0.79 0.77 0.75 0.74 0.73 0.73 0.73 0.72 0.72 0.73 0.73 0.73 0.74 0.74 0.75 0.76 0.76 0.77 0.78 0.78 -42.72 -62.66 -81.48 -98.49 -114.47 -129.09 -142.63 -155.20 -166.71 -177.38 172.73 163.36 154.49 146.17 137.93 129.96 122.52 114.96 107.64 100.69 93.20 86.08 79.35 72.88 66.18 dB S21 Mag. S12 Ang. Mag. Ang. Mag. Ang. MSG/MAG dB 19.01 18.46 17.82 17.11 16.36 15.64 14.91 14.16 13.47 12.81 12.17 11.58 11.00 10.48 9.99 9.52 9.05 8.61 8.19 7.77 7.38 7.01 6.66 6.31 5.94 8.92 8.38 7.78 7.17 6.58 6.05 5.56 5.11 4.71 4.37 4.06 3.79 3.55 3.34 3.16 2.99 2.83 2.69 2.57 2.44 2.34 2.24 2.15 2.07 1.98 148.51 134.49 121.19 109.28 98.09 87.68 77.86 68.55 59.82 51.64 43.68 36.07 28.75 21.67 14.53 7.56 0.89 -5.89 -12.53 -19.05 -25.66 -32.37 -38.72 -45.30 -51.81 0.03 0.05 0.06 0.07 0.07 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.07 0.07 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.06 0.06 62.56 50.55 39.47 29.48 20.68 12.23 4.59 -2.42 -8.97 -15.21 -20.51 -25.92 -31.20 -35.48 -39.63 -43.76 -47.66 -51.22 -54.78 -58.37 -62.24 -65.41 -69.57 -72.63 -76.40 0.78 0.74 0.69 0.65 0.60 0.56 0.53 0.50 0.47 0.45 0.43 0.42 0.40 0.40 0.39 0.38 0.38 0.38 0.38 0.38 0.37 0.37 0.38 0.38 0.38 -22.76 -33.18 -42.88 -51.36 -59.27 -66.63 -73.61 -80.46 -86.77 -92.81 -98.99 -104.88 -110.71 -116.24 -121.82 -127.93 -133.93 -139.67 -145.51 -151.20 -156.42 -162.46 -168.85 -175.43 178.40 33.45 30.07 27.08 24.89 23.06 21.51 20.20 19.02 18.01 17.11 16.34 15.64 15.00 14.43 13.96 13.52 13.09 12.70 12.36 12.05 11.72 11.42 11.26 10.99 10.70 Г opt Ang. Rn/50   Typical Noise Parameters 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Fmin dB 0.15 0.23 0.3 0.37 0.44 0.51 0.58 0.66 0.73 0.8 0.87 0.94 1.01 1.09 1.16 1.23 Г opt Mag. 0.78 0.707 0.637 0.573 0.515 0.462 0.415 0.373 0.338 0.308 0.284 0.265 0.252 0.245 0.244 0.248 16.80 24 31.7 40 48.8 58.2 68.1 78.6 89.7 101.3 113.5 126.2 139.5 153.4 167.8 -177.3 0.19 0.19 0.18 0.17 0.16 0.15 0.14 0.13 0.12 0.11 0.1 0.09 0.09 0.08 0.08 0.08 Note: 1. S-parameters are measured in 50 Ohm test environment. 5 40.00 Ga dB 21.31 19.92 18.63 17.45 16.37 15.41 14.55 13.79 13.15 12.61 12.17 11.85 11.63 11.52 11.51 11.62 MSG/MAG S21 35.00 MSG/MAG and S21 (dB) Freq GHz S22 30.00 25.00 20.00 15.00 10.00 5.00 0.00 0 5 10 15 20 FREQUENCY (GHz) Figure 15. MSG/MAG and S21 vs Frequency at 2V 20mA 25 30 VMMK-1225 Typical Scattering Parameters and Noise Parameters, TA=25°C, Vds=1.5V, Ids=20mA [1] Freq GHz S11 Mag. Ang. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 0.95 0.92 0.88 0.85 0.82 0.79 0.77 0.75 0.74 0.73 0.72 0.72 0.72 0.71 0.72 0.72 0.72 0.73 0.73 0.74 0.75 0.75 0.76 0.76 0.77 -41.45 -60.81 -79.22 -95.99 -111.80 -126.35 -139.88 -152.58 -164.13 -174.92 175.03 165.58 156.60 148.19 139.78 131.83 124.31 116.48 109.16 102.09 94.51 87.43 80.52 74.22 67.45 dB S21 Mag. S12 Ang. Mag. Ang. Mag. Ang. MSG/MAG dB 19.16 18.64 18.03 17.35 16.64 15.94 15.23 14.50 13.82 13.16 12.54 11.95 11.38 10.86 10.37 9.89 9.42 8.97 8.55 8.15 7.76 7.38 7.03 6.67 6.31 9.07 8.55 7.97 7.37 6.80 6.26 5.77 5.31 4.91 4.55 4.24 3.96 3.71 3.49 3.30 3.12 2.96 2.81 2.68 2.55 2.44 2.34 2.25 2.16 2.07 149.23 135.54 122.51 110.76 99.69 89.35 79.62 70.33 61.64 53.54 45.64 38.11 30.88 23.83 16.76 9.84 3.32 -3.41 -9.91 -16.35 -22.84 -29.48 -35.76 -42.19 -48.60 0.04 0.05 0.06 0.07 0.08 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.08 0.08 0.08 0.08 0.08 0.08 0.07 0.07 0.07 0.07 63.03 51.14 40.08 30.08 20.91 12.49 4.67 -2.71 -9.42 -15.86 -21.52 -27.32 -32.92 -37.75 -42.36 -47.16 -51.18 -55.89 -60.43 -64.86 -69.11 -73.28 -77.84 -82.02 -86.38 0.75 0.71 0.66 0.62 0.57 0.53 0.49 0.46 0.43 0.41 0.38 0.37 0.35 0.34 0.33 0.33 0.32 0.32 0.32 0.32 0.31 0.31 0.31 0.32 0.32 -25.07 -36.68 -47.70 -57.44 -66.62 -75.19 -83.31 -91.35 -98.74 -105.72 -112.70 -119.39 -125.81 -131.85 -138.18 -144.56 -150.78 -157.20 -163.11 -169.12 -174.70 178.98 172.70 166.48 159.81 35.71 32.36 29.32 27.04 25.10 23.45 22.05 20.76 19.66 18.68 17.84 17.08 16.37 15.76 15.26 14.79 14.34 13.95 13.60 13.28 12.90 12.59 12.42 12.14 11.88 Г opt Rn/50 Typical Noise Parameters Fmin Г opt GHz dB Mag. Ang.   dB 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 0.15 0.21 0.28 0.34 0.41 0.47 0.54 0.6 0.67 0.73 0.8 0.86 0.93 0.99 1.06 1.12 0.81 0.734 0.665 0.601 0.543 0.49 0.442 0.4 0.363 0.332 0.307 0.286 0.272 0.262 0.259 0.26 16.80 24 31.8 40 48.8 58.2 68 78.4 89.3 100.7 112.6 125.1 138.1 151.6 165.6 -179.8 0.18 0.18 0.17 0.17 0.16 0.15 0.14 0.13 0.12 0.11 0.1 0.09 0.08 0.08 0.08 0.08 21.28 19.91 18.65 17.49 16.43 15.48 14.64 13.9 13.27 12.74 12.32 12 11.79 11.68 11.68 11.79 Note: 1. S-parameters are measured in 50 Ohm test environment. 6 40.00 Ga MSG/MAG S21 35.00 MSG/MAG and S21 (dB) Freq S22 30.00 25.00 20.00 15.00 10.00 5.00 0.00 0 5 10 15 20 FREQUENCY (GHz) Figure 16. MSG/MAG and S21 vs Frequency at 1.5V 20mA 25 30 VMMK-1225 Typical Scattering Parameters and Noise Parameters, TA=25°C, Vds=3V, Ids=20mA [1] Freq GHz Mag. S11 Ang. dB S21 Mag. Ang. Mag. S12 Ang. Mag. Ang. MSG/MAG dB 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 0.95 0.92 0.87 0.84 0.81 0.78 0.76 0.75 0.74 0.74 0.74 0.74 0.74 0.73 0.74 0.74 0.74 0.74 0.75 0.75 0.75 0.75 0.76 0.76 0.77 -44.16 -64.98 -84.86 -103.02 -119.88 -135.19 -149.25 -161.91 -173.16 176.55 167.27 158.74 150.81 143.18 135.70 128.49 121.25 113.89 106.67 99.29 91.51 83.74 75.90 68.74 61.14 18.65 18.10 17.43 16.69 15.89 15.11 14.32 13.51 12.77 12.05 11.39 10.77 10.19 9.66 9.16 8.71 8.27 7.85 7.46 7.07 6.72 6.37 6.04 5.69 5.33 8.56 8.03 7.44 6.83 6.23 5.69 5.20 4.74 4.35 4.01 3.71 3.46 3.23 3.04 2.87 2.73 2.59 2.47 2.36 2.26 2.17 2.08 2.00 1.93 1.85 147.52 132.99 119.11 106.61 94.91 84.12 74.00 64.50 55.73 47.51 39.54 32.00 24.84 17.76 10.68 3.81 -2.90 -9.79 -16.52 -23.30 -30.13 -37.20 -43.95 -50.88 -57.76 0.03 0.04 0.05 0.06 0.06 0.07 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 62.38 49.96 38.25 28.18 19.19 10.75 3.23 -3.86 -9.95 -15.58 -20.57 -25.46 -29.82 -33.52 -36.60 -39.53 -42.17 -44.68 -47.26 -50.61 -52.95 -55.09 -58.00 -60.53 -63.55 0.80 0.76 0.71 0.67 0.63 0.59 0.56 0.53 0.52 0.50 0.49 0.48 0.47 0.47 0.47 0.47 0.47 0.48 0.48 0.48 0.49 0.49 0.49 0.49 0.49 -20.48 -29.83 -38.52 -46.15 -53.21 -59.80 -66.03 -72.27 -78.27 -84.02 -90.13 -96.11 -101.79 -107.60 -113.31 -118.80 -124.55 -130.27 -136.04 -141.26 -146.30 -151.70 -157.00 -163.41 -168.90 33.25 29.80 26.77 24.51 22.66 21.11 19.78 18.59 17.60 16.71 15.98 15.29 14.67 14.12 13.64 13.23 12.80 12.44 12.11 11.78 11.46 11.13 10.91 10.67 10.37 Typical Noise Parameters Fmin dB Г opt Mag. Г opt Ang. Rn/50   Ga dB 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 0.14 0.21 0.29 0.37 0.45 0.53 0.61 0.68 0.76 0.84 0.92 1 1.08 1.15 1.23 1.31 0.783 0.704 0.632 0.565 0.505 0.45 0.402 0.359 0.322 0.291 0.266 0.247 0.234 0.227 0.226 0.231 16.4 23.4 30.9 39.1 48 57.4 67.6 78.3 89.7 101.7 114.3 127.6 141.5 156 171.2 -173 0.19 0.18 0.18 0.17 0.16 0.15 0.14 0.13 0.12 0.11 0.11 0.1 0.09 0.09 0.09 0.09 20.73 19.33 18.03 16.85 15.77 14.81 13.95 13.21 12.57 12.04 11.62 11.31 11.12 11.03 11.05 11.18 Note: 1. S-parameters are measured in 50 Ohm test environment. 7 35.00 MSG/MAG S21 30.00 MSG/MAG and S21 (dB) Freq GHz S22 25.00 20.00 15.00 10.00 5.00 0.00 0 5 10 15 20 FREQUENCY (GHz) Figure 17. MSG/MAG and S21 vs Frequency at 3V 20mA 25 30 VMMK-1225 Typical Scattering Parameters and Noise Parameters, TA=25°C, Vds=4V, Ids=20mA [1] Freq GHz S11 Mag. Ang. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 0.95 0.91 0.87 0.83 0.80 0.78 0.76 0.75 0.74 0.74 0.74 0.74 0.74 0.74 0.74 0.74 0.74 0.74 0.75 0.75 0.75 0.75 0.76 0.77 0.77 -45.53 -66.85 -87.06 -105.43 -122.38 -137.72 -151.66 -164.20 -175.38 174.53 165.32 156.90 149.09 141.52 134.12 126.90 119.69 112.42 105.25 97.82 90.09 82.38 74.56 67.45 59.93 dB S21 Mag. S12 Ang. Mag. Ang. Mag. Ang. MSG/MAG dB 18.45 17.86 17.16 16.37 15.55 14.73 13.93 13.11 12.36 11.64 10.97 10.34 9.76 9.23 8.72 8.27 7.82 7.40 7.00 6.61 6.24 5.88 5.55 5.20 4.83 8.37 7.82 7.21 6.59 5.99 5.45 4.97 4.52 4.15 3.82 3.54 3.29 3.08 2.89 2.73 2.59 2.46 2.34 2.24 2.14 2.05 1.97 1.89 1.82 1.74 146.63 131.81 117.72 105.08 93.35 82.50 72.41 62.92 54.12 45.87 37.88 30.28 23.07 15.94 8.83 1.87 -4.91 -11.91 -18.68 -25.52 -32.42 -39.51 -46.30 -53.32 -60.23 0.03 0.04 0.05 0.05 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.04 0.05 61.48 49.37 37.71 27.63 18.64 10.37 3.27 -3.88 -9.86 -14.98 -19.88 -23.98 -28.30 -31.31 -34.13 -35.42 -38.50 -40.30 -42.50 -43.80 -46.17 -48.45 -50.37 -52.43 -55.25 0.81 0.77 0.73 0.69 0.65 0.62 0.59 0.56 0.55 0.53 0.52 0.52 0.51 0.51 0.51 0.51 0.51 0.52 0.52 0.53 0.53 0.53 0.53 0.53 0.53 -19.63 -28.48 -36.59 -43.74 -50.37 -56.59 -62.52 -68.53 -74.35 -80.07 -86.09 -92.05 -97.69 -103.56 -109.35 -114.79 -120.61 -126.46 -132.13 -137.49 -142.61 -148.08 -153.35 -159.71 -165.19 33.11 29.56 26.53 24.25 22.41 20.86 19.54 18.35 17.39 16.51 15.78 15.09 14.48 13.94 13.46 13.05 12.65 12.27 11.94 11.61 11.28 10.95 10.73 10.48 10.18 Typical Noise Parameters Fmin dB Г opt Mag. Г opt Ang. Rn/50   Ga dB 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 0.14 0.22 0.3 0.37 0.45 0.53 0.6 0.68 0.75 0.83 0.91 0.98 1.06 1.14 1.21 1.29 0.78 0.697 0.625 0.558 0.498 0.443 0.395 0.352 0.316 0.286 0.261 0.243 0.231 0.224 0.224 0.23 16.40 23.2 30.7 38.9 47.7 57.3 67.5 78.4 89.9 102.1 115 128.6 142.9 157.8 173.4 -170.3 0.20 0.19 0.19 0.18 0.17 0.16 0.15 0.14 0.13 0.12 0.11 0.1 0.1 0.09 0.09 0.09 20.28 18.95 17.71 16.58 15.55 14.63 13.81 13.09 12.47 11.96 11.55 11.24 11.03 10.93 10.94 11.04 Note: 1. S-parameters are measured in 50 Ohm test environment. 8 35.00 MSG/MAG S21 30.00 MSG/MAG and S21 (dB) Freq GHz S22 25.00 20.00 15.00 10.00 5.00 0.00 0 5 10 15 20 FREQUENCY (GHz) Figure 18. MSG/MAG and S21 vs Frequency at 4V 20mA 25 30 Small Signal Model Parameters Parameter Value   Parameter Value   Parameter Value   Parameter Value Vd (V) 1.5   Vd (V) 1.5   Vd (V) 1.5   Vd (V) 1.5 Id (mA) 5   Id (mA) 10   Id (mA) 15   Id (mA) 20 Gm 0.07549   Gm 0.10852   Gm 0.1276   Gm 0.128 Tau 0.001914   Tau 0.00212   tau 0.002061   tau 0.001952 Cgs 0.3008   Cgs 0.3596   Cgs 0.393   Cgs 0.3943 Rgs 0   Rgs 0.05267   Rgs 1.682   Rgs 1.989 Cgd 0.04174   Cgd 0.0376   Cgd 0.0337   Cgd 0.03377 Cds 0.1093   Cds 0.10984   Cds 0.109   Cds 0.1082 Rds 540.40   Rds 374.20   Rds 348.00   Rds 341.90 Parameter Value   Parameter Value   Parameter Value   Parameter Value Vd (V) 2   Vd (V) 2   Vd (V) 2   Vd (V) 2 Id (mA) 5   Id (mA) 10   Id (mA) 15   Id (mA) 20 Gm 0.07357   Gm 0.1063   Gm 0.1243   Gm 0.1357 Tau 0.00206   Tau 0.00206   tau 0.002   tau 0.002034 Cgs 0.3266   Cgs 0.3973   Cgs 0.4458   Cgs 0.4758 Rgs 0.4454   Rgs 1.598   Rgs 1.9394   Rgs 2.282 Cgd 0.03642   Cgd 0.0323   Cgd 0.0289   Cgd 0.0256 Cds 0.1081   Cds 0.1075   Cds 0.1075   Cds 0.1072 Rds 631.10   Rds 444.90   Rds 408.90   Rds 418.70 Parameter Value   Parameter Value   Parameter Value   Parameter Value Vd (V) 3   Vd (V) 3   Vd (V) 3   Vd (V) 3 Id (mA) 5   Id (mA) 10   Id (mA) 15   Id (mA) 20 Gm 0.0718   Gm 0.1023   Gm 0.1196   Gm 0.1305 tau 0.002319   tau 0.00224   tau 0.00226   tau 0.002248 Cgs 0.3761   Cgs 0.4662   Cgs 0.5227   Cgs 0.555 Rgs 1.106   Rgs 1.801   Rgs 2.023   Rgs 2.15 Cgd 0.0293   Cgd 0.02623   Cgd 0.02397   Cgd 0.022 Cds 0.1071   Cds 0.1065   Cds 0.1067   Cds 0.1064 Rds 785.70   Rds 556.80   Rds 494.10   Rds 479.90 Parameter Value   Parameter Value   Parameter Value   Parameter Value Vd (V) 3   Vd (V) 3   Vd (V) 3   Vd (V) 3 Id (mA) 5   Id (mA) 10   Id (mA) 15   Id (mA) 20 Gm 0.06983   Gm 0.1005   Gm 0.5649   Gm 0.1269 tau 0.002544   tau 0.002389   tau 0.002383   tau 0.002368 Cgs 0.4077   Cgs 0.51068   Cgs 0.5649   Cgs 0.595 Rgs 1.341   Rgs 1.879   Rgs 1.912   Rgs 1.883 Cgd 0.02604   Cgd 0.02355   Cgd 0.02197   Cgd 0.0208 Cds 0.1062   Cds 0.10589   Cds 0.1057   Cds 0.1058 Rds 887.00   Rds 627.00   Rds 552.20   Rds 517.10 9 S Parameter Measurements The S-parameters are measured on a .016 inch thick RO4003 printed circuit test board, using G-S-G (ground signal ground) probes. Coplanar waveguide is used to provide a smooth transition from the probes to the device under test. The presence of the ground plane on top of the test board results in excellent grounding at the device under test. A combination of SOLT (Short - Open - Load - Thru) and TRL (Thru - Reflect - Line) calibration techniques are used to correct for the effects of the test board, resulting in accurate device S-parameters. The reference plane for the S Parameters is at the edge of the package. VMMK-1225 ADS Model CAP ID=C6 C=Cpgd pF PORT P=1 Z=50 Ohm IND ID=L1 L=Lg nH RES ID=R3 R=Rg Ohm CAP ID=C4 C=Cgd pF CAP ID=C1 C=Cgs pF RES ID=R1 R=Rgs Ohm CAP ID=C3 C=Cpgs pF RES ID=R4 R=Rs Ohm IND ID=L3 L=Ls nH 10 Rg Value Rg 4.532 Rd 1.9 RsG 1.72 C pgs 0.0475 C pds 0.0392 C pgd 0.003935 Ls 0.000303 Lg 0.3492 Ld 0.2772 PORT P=3 Z=50 Ohm RES ID=R2 R=Rd Ohm 1 3 2 4 VCCS ID=U1 M=Gm S A=0 Deg R1=1e100 Ohm R2=Rds Ohm F=0 GHz T=tau ns IND ID=L2 L=Ld nH PORT P=2 Z=50 Ohm CAP ID=C2 C=Cds pF CAP ID=C5 C=Cpds pF Outline Drawing 1.004 MIN, 1.085 MAX PIN ONE INDICATOR 0.125 0.500 MIN, 0.585 MAX GROUND PAD 0.390 0.160 INPUT PAD 0.125 0.470 OUTPUT PAD 0.160 Notes: 1. • indicates pin 1 2. Dimensions are in millimeters 3. Pad Material is minimum 5.0 um thick Au Suggested PCB Material and Land Pattern Recommended SMT Attachment The VMMK Packaged Devices are compatible with high volume surface mount PCB assembly processes. 1.2 (0.048) 0.400 (0.016) 0.100 (0.004) 0.076 max (0.003) 2pl see discussion 0.381 (0.015) 2pl Notes: 1. 0.010” Rogers RO4350 1. Follow ESD precautions while handling packages. 0.100 (0.004) 0.500 (0.020) Part of Input Circuit Manual Assembly for Prototypes 2. Handling should be along the edges with tweezers or from topside if using a vacuum collet. 0.500 (0.020) 0.200 (0.008) 0.200 (0.008) Part of Output Circuit 0.254 dia PTH (0.010) 4pl Solder Mask 0.400 dia (0.016) 4pl 0.7 (0.028) 3. Recommended attachment is solder paste. Please see Figure 14 for recommended solder reflow profile. Conductive epoxy is not recommended. Hand soldering is not recommended. 4. Apply solder paste using either a stencil printer or dot placement. The volume of solder paste will be dependent on PCB and component layout and should be controlled to ensure consistent mechanical and electrical performance. Excessive solder will degrade RF performance. 5. Follow solder paste and vendor’s recommendations when developing a solder reflow profile. A standard profile will have a steady ramp up from room temperature to the pre-heat temp to avoid damage due to thermal shock. 6. Packages have been qualified to withstand a peak temperature of 260ºC for 20 to 40 sec. Verify that the profile will not expose device beyond these limits. 7. Clean off flux per vendor’s recommendations. 8. Clean the module with Acetone. Rinse with alcohol. Allow the module to dry before testing. 11 Part Number Ordering Information Part Number No. of Devices Container VMMK-1225-BLKG 100 antistatic bag VMMK-1225-TR1G 5000 7” Reel Package Dimension Outline D E Symbol Min (mm) Max (mm) D 1.004 1.085 E 0.500 0.585 A 0.225 0.275 A Notes: All dimensions are in mm Device Orientation REEL USER FEED DIRECTION CARRIER TAPE USER FEED DIRECTION 4 mm 12 • AYY Notes: “A” = Device Code “YY” = Month Code • AYY • AYY • AYY TOP VIEW 8 mm END VIEW Bo B 5º Bo F W Note: 1 Po E Do Note: 2 Note: 2 P2 A A P1 D1 B Scale 5:1 B-B Section Ao RO.1 5º Ko Ao = 0.73± 0.05 mm Scale 5:1 A-A Section Bc = 1.26± 0.05 mm + 0.05 Ko = 0.35 + 0 mm Notice: 1. 10 sprocket hole pitch cumulative tolerance is ±0.1 mm 2. Pocket position relative to sprocket hole measured as true position of pocket not pocket hole 3. Ao & Bo measured on a place 0.3mm above the bottom of the pocket to top surface of the carrier 4. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier 5. Carrier camber shall be not than 1mm per 100mm through a length of 250mm Symbol Parameter and Test Condition K1 - Po 4.0± 0.10 P1 4.0± 0.10 P2 2.0± 0.05 Do 1.55± 0.05 D1 0.5± 0.05 E 1.75± 0.10 F 3.50± 0.05 Po 40.0± 0.10 W 8.0± 0.20 T 0.20± 0.02 Unit: mm For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2005-2014 Avago Technologies Limited. All rights reserved. AV02-1082EN - January 9, 2014