009158016030062

Dual Row Stacker: 9158-000 BTB General Description The MOBO® series 9158 is a one-piece connector used to connect two PCBs within mobile phones, pagers, PDAs, security, handheld scanners, etc. in a cost-effective manner. A standard range is available with 16, 20, 24 and 28 contacts to suit stack heights of 1.90mm to 3.30mm. Other contact variants are also available up to 5.10mm, in custom housings. The SOLO STACKER can allow a spacing tolerance of up to ±0.30mm and still provide reliable connections between the PCBs, even if they are not parallel. SOLO STACKER is designed for PCB surface mounting and is supplied in tape and reel packaging. Gold plated pads on the mating PCB or suitable flex circuits provide connection between the boards. Whatever your requirements this SOLO STACKER can also be customized to suit your applications. APPLICATIONS • • • • • • • • FEATURES AND BENEFITS • Reduced assembly time. • Only one part to purchase and stock. • Due to the unique contact design, the mating device does not have to be parallel. • Extremely robust when subjected to shock and vibration. • Cost effective. • Helps reduce tolerance accumulation within system. Mobile Phones PDA Medical PMR Industrial Security Handheld Scanner Specification: Refer to 201-01-073 ELECTRICAL ENVIRONMENTAL MECHANICAL • Current Rating: 1 Amp/Contact • Voltage Rating: 125VAC (RMS or DC Equivalent, based on placement distance) • Operating Temperature: -55ºC to +125ºC • Storage Temperature: -40ºC to +70ºC • Insulator Material: High Temperature Plastic; UL94 HB • Contact Material: Beryllium Copper • Plating: Gold over Nickel • Durability: 50 Cycles HOW TO ORDER 00 9158 0XX Prefix Series Number of Ways 016 = 16 020 = 20 024 = 24 028 = 28 0XX Stack Height 020 = 1.9mm to 2.1mm 025 = 2.1mm to 2.7mm 030 = 2.8mm to 3.3mm 06 Plating Variation 06 = Selective Gold 0.25μm Gold Plated Contact Nose Pure Tin Tail X PCB Location Bosses 1 = With PCB Location Bosses 2 = Without PCB Location Bosses The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-BTB-0005 | Rev 1 – board to board connector solutions – 117 Dual Row Stacker: 9158-000 BTB 2.0mm Without Bosses 2.0MM DUAL ROW STACKER WITHOUT BOSSES MATING CONDITION NOTES: 1. LAYOUT FOR MULTI-WAY DUAL ROW STACKING CONNECTOR (SERIES 9158). 2. FOR FULL PRODUCT SPECIFICATION REFER TO SPEC 201-01-073. 3. PART TO BE PACKED IN TAPE AND REEL. REFER TO PAGE 116 FOR DETAILS. 4. STACKER DESIGN TO ACCOMMODATE A PCB STACKING HEIGHT OF 1.90MM TO 2.10MM. 5. NO ALLOWANCE HAS BEEN MADE FOR SOLDER PASTE THICKNESS IN PCB STACKING HEIGHT. 6. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED. SMT PCB FOOTPRINT No of Positions 16 20 24 28 118 Part Number A B 00-9158-016-020-062 00-9158-020-020-062 00-9158-024-020-062 00-9158-028-020-062 7 9 11 13 9.00 11.00 13.00 15.00 MATING PCB FOOTPRINT The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-BTB-0005 | Rev 1 – board to board connector solutions – Dual Row Stacker: 9158-000 BTB 2.5mm Without Bosses 2.5MM DUAL ROW STACKER WITHOUT BOSSES MATING CONDITION NOTES: 1. LAYOUT FOR MULTI-WAY DUAL ROW STACKING CONNECTOR (SERIES 9158). 2. FOR FULL PRODUCT SPECIFICATION REFER TO SPEC 201-01-073. 3. PART TO BE PACKED IN TAPE AND REEL. REFER TO PAGE 116 FOR DETAILS. 4. STACKER DESIGN TO ACCOMMODATE A PCB STACKING HEIGHT OF 2.10MM TO 2.70MM. 5. NO ALLOWANCE HAS BEEN MADE FOR SOLDER PASTE THICKNESS IN PCB STACKING HEIGHT. 6. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED. SMT PCB FOOTPRINT No of Positions Part Number A B 16 20 24 28 00-9158-016-020-062 00-9158-020-020-062 00-9158-024-020-062 00-9158-028-020-062 7 9 11 13 9.00 11.00 13.00 15.00 MATING PCB FOOTPRINT The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-BTB-0005 | Rev 1 – board to board connector solutions – 119 Dual Row Stacker: 9158-000 BTB 3.0mm Without Bosses 3.0MM DUAL ROW STACKER WITHOUT BOSSES MATING CONDITION NOTES: 1. LAYOUT FOR MULTI-WAY DUAL ROW STACKING CONNECTOR (SERIES 9158). 2. FOR FULL PRODUCT SPECIFICATION REFER TO SPEC 201-01-073. 3. PART TO BE PACKED IN TAPE AND REEL. REFER TO PAGE 116 FOR DETAILS. 4. STACKER DESIGN TO ACCOMMODATE A PCB STACKING HEIGHT OF 2.80MM TO 3.30MM. 5. NO ALLOWANCE HAS BEEN MADE FOR SOLDER PASTE THICKNESS IN PCB STACKING HEIGHT. 6. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED. SMT PCB FOOTPRINT No of Positions 16 20 24 28 120 Part Number A B 00-9158-016-020-062 00-9158-020-020-062 00-9158-024-020-062 00-9158-028-020-062 7 9 11 13 9.00 11.00 13.00 15.00 MATING PCB FOOTPRINT The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-BTB-0005 | Rev 1 – board to board connector solutions – Dual Row Stacker: 9158-000 BTB 2.0mm With Bosses 2.0MM DUAL ROW STACKER WITH BOSSES MATING CONDITION NOTES: 1. LAYOUT FOR MULTI-WAY DUAL ROW STACKING CONNECTOR (SERIES 9158). 2. FOR FULL PRODUCT SPECIFICATION REFER TO SPEC 201-01-073. 3. PART TO BE PACKED IN TAPE AND REEL. REFER TO PAGE 116 FOR DETAILS. 4. STACKER DESIGN TO ACCOMMODATE A PCB STACKING HEIGHT OF 1.90MM TO 2.10MM. 5. NO ALLOWANCE HAS BEEN MADE FOR SOLDER PASTE THICKNESS IN PCB STACKING HEIGHT. 6. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED. SMT PCB FOOTPRINT No of Positions 16 20 24 28 Part Number A B 00-9158-016-020-062 00-9158-020-020-062 00-9158-024-020-062 00-9158-028-020-062 7 9 11 13 9.00 11.00 13.00 15.00 MATING PCB FOOTPRINT The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-BTB-0005 | Rev 1 – board to board connector solutions – 121 Dual Row Stacker: 9158-000 BTB 2.5mm With Bosses 2.5MM DUAL ROW STACKER WITH BOSSES MATING CONDITION NOTES: 1. LAYOUT FOR MULTI-WAY DUAL ROW STACKING CONNECTOR (SERIES 9158). 2. FOR FULL PRODUCT SPECIFICATION REFER TO SPEC 201-01-073. 3. PART TO BE PACKED IN TAPE AND REEL. REFER TO PAGE 116 FOR DETAILS. 4. STACKER DESIGN TO ACCOMMODATE A PCB STACKING HEIGHT OF 2.10MM TO 2.70MM. 5. NO ALLOWANCE HAS BEEN MADE FOR SOLDER PASTE THICKNESS IN PCB STACKING HEIGHT. 6. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED. SMT PCB FOOTPRINT No of Positions 16 20 24 28 122 Part Number A B 00-9158-016-020-062 00-9158-020-020-062 00-9158-024-020-062 00-9158-028-020-062 7 9 11 13 9.00 11.00 13.00 15.00 MATING PCB FOOTPRINT The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-BTB-0005 | Rev 1 – board to board connector solutions – Dual Row Stacker: 9158-000 BTB 3.0mm With Bosses 3.0MM DUAL ROW STACKER WITH BOSSES MATING CONDITION NOTES: 1. LAYOUT FOR MULTI-WAY DUAL ROW STACKING CONNECTOR (SERIES 9158). 2. FOR FULL PRODUCT SPECIFICATION REFER TO SPEC 201-01-073. 3. PART TO BE PACKED IN TAPE AND REEL. REFER TO PAGE 116 FOR DETAILS. 4. STACKER DESIGN TO ACCOMMODATE A PCB STACKING HEIGHT OF 2.80MM TO 3.30MM. 5. NO ALLOWANCE HAS BEEN MADE FOR SOLDER PASTE THICKNESS IN PCB STACKING HEIGHT. 6. GENERAL TOLERANCE ±0.20 UNLESS OTHERWISE STATED. SMT PCB FOOTPRINT No of Positions 16 20 24 28 Part Number A B 00-9158-016-020-062 00-9158-020-020-062 00-9158-024-020-062 00-9158-028-020-062 7 9 11 13 9.00 11.00 13.00 15.00 MATING PCB FOOTPRINT The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-BTB-0005 | Rev 1 – board to board connector solutions – 123 Dual Row Stacker: 9158-000 BTB Limits to PBC Misalignment & Packing Details LIMITS TO PCB MISALIGNMENT Code (See page 107) Stack Height (Note 1) 020 1.9mm to 2.1mm 025 030 2.1mm to 2.7mm 2.7mm to 3.3mm Max Angle Degrees on Axis (Note 4) 16 20 24 28 X 2.0 2.0 2.0 2.0 Y 3.5 3.5 3.5 3.5 Z 2.0 1.5 1.0 1.0 X 4.0 4.0 4.0 4.0 Y 2.5 2.5 2.5 2.5 Z 4.0 3.0 2.5 2.0 X 4.0 4.0 4.0 4.0 Y 2.5 2.5 2.5 2.5 Z 3.5 2.5 2.0 2.0 Number of Ways NOTES: 1. PCB STACK HEIGHT (REF PAGE 117). THIS IS THE CONTROLLING LIMIT ON THE GAP BETWEEN THE TWO PCB FACES AT ANY POINT WHEN IN THE FINAL MATED POSITION. 2. NO ALLOWANCE HAS BEEN MADE FOR SOLDER PASTE THICKNESS IN PCB STACKING HEIGHT. 3. IT IS CRITICAL THAT ON ASSEMBLY THE CONTACT NOSES DO NOT STRAY OUTSIDE OF THE MATING PAD AREA IN THE FINAL MATED POSITION. 4. THE MAXIMUM MISALIGNMENT ABOUT ANY ONE AXIS IN DEGREES. SEE NOTES 1 AND 3. PACKING DETAILS 9158 SOLO STACKER CONNECTORS No of Positions 16 16 16 16 16 16 20 20 20 20 20 20 24 24 24 24 24 24 28 28 28 28 28 28 Stack Bosses Height 2.0 2.0 2.5 2.5 3.0 3.0 2.0 2.0 2.5 2.5 3.0 3.0 2.0 2.0 2.5 2.5 3.0 3.0 2.0 2.0 2.5 2.5 3.0 3.0 Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Part Number Tape Width Reel Qty. 00-9158-016-020-0X1 00-9158-016-020-0X2 00-9158-016-025-0X1 00-9158-016-025-0X2 00-9158-016-030-0X1 00-9158-016-030-0X2 00-9158-020-020-0X1 00-9158-020-020-0X2 00-9158-020-025-0X1 00-9158-020-023-0X2 00-9158-020-030-0X1 00-9158-020-030-0X2 00-9158-024-020-0X1 00-9158-024-020-0X2 00-9158-024-025-0X1 00-9158-024-025-0X2 00-9158-024-030-0X1 00-9158-024-030-0X2 00-9158-028-020-0X1 00-9158-028-020-0X2 00-9158-028-025-0X1 00-9158-028-025-0X2 00-9158-028-030-0X1 00-9158-028-030-0X2 16 16 16 16 16 16 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 1250 1500 1250 1250 1100 1100 1250 1500 1250 1250 1100 1100 1250 1500 1250 1250 1100 1100 1250 1500 1250 1250 1100 1100 TYPICAL 16 WAY (SHOWN WITH BOSSES) TYPICAL 24 WAY (SHOWN WITH BOSSES) 124 TYPICAL 20 WAY (SHOWN WITHOUT BOSSES) TYPICAL 28 WAY (SHOWN WITHOUT BOSSES) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-BTB-0005 | Rev 1 – board to board connector solutions –