009159010061916

Open Ended Card Edge: BTB INTERCONNECT 00-9159 AVX was challenged with increasing the pin count density as well as minimizing the size of the existing coplanar BTB card edge connector for linear strip lighting. The current product is a 2.0mm with single contacts that straddle the PCB to make electrical connection on both the top and bottom side of the board. By simply changing the contacts to a double sided configuration (separate contacts for both the top and bottom of the PCB), AVX was able to double the pin count in the same 2.0mm pitch with minimal to no impact on the electrical performance of the connector. Reducing the size of the connector required a complete new design as the target was a 4p connector with a total length of 4.0mm. To achieve this, AVX removed the end walls and then added a center support/keying rib to pre-align the PCB during mating. This rib the then holds the PCB in the proper functional location. The new family of connectors is available with contact sizes of 4, 6, 8 and 10 positions, doubling the current products range. The current rating will be 3A for the 4p and 6p, and then drop to 2.5A for the 8p and 10p connector. The connector supports the standard 1.6mm PCB thickness. This new connector provides the highest density to reliably connect two in-line PCB’s together in the most cost effective assembled solution. More importantly, the increased pin count allows for more flexibility in mixing and matching power and signal lines. APPLICATIONS FEATURES AND BENEFITS • Linear LED strip lighting • Commercial/Industrial co-planar or extended card applications • Reference Product Specification 201-01-144 • Miniaturized size, achieves 1.0mm in length for each number of contacts (4p =4.0mm) • Double Ended/Double Sided contacts for increased pin count density on standard 1.6mm thick PCB’s • Central polarizing/location rib assures proper mating and PCB location • High current capabilities: 3A; 4p/6p and 2.5A; 8p/10p • Economical high force Tin-to-Tin contact interface ELECTRICAL ENVIRONMENTAL MECHANICAL • Current Rating: 3.0 amps 4p/6p and 2.5 amps 8p/10p • Voltage Rating: 300 VAC • Operating Temperature: -40ºC to +125ºC • • • • Insulator Material: Nylon 46: UL94VO Contact Material: Phosphor Bronze Plating: Tin over Nickel Durability: 5 Cycles HOW TO ORDER 00 9159 00X 0 61 Prefix Series Number of Ways Single Part PCB Strip Connector PCB Thickness 61 = Open Ended PCB Tickness 1.6-±0.10 No of Code Ways 004 4 006 6 008 8 010 10 Details Page 2 Page 3 Page 4 Page 5 X 1 X Insulator Color Packaging Options 1 = Bag Plating Option 6 = Pure Tin all over 1 = Gold Flash Code Color Application 8 Black Special Order 9 White Standard Certification: UL File #E90723 1 Open Ended Card Edge: BTB 00-9159 INTERCONNECT 4 WAY SINGLE PART PCB STRIP CONNECTOR – OPEN ENDED SECTION VIEW THROUGH CONTACT POSITION NOTES: 1. INSULATOR MATERIAL NYLON 46, UL94 V-0. COLOR REFER TO PAGE 1. 2. CONTACT MATERIAL COPPER ALLOY, TIN PLATED 3. PARTS TO BE SUPPLIED IN BAGS, 1000 PIECES PER BAG. 4. GENERAL TOLERANCE ±0.20MM UNLESS STATED. 5. ARROW ADJACENT TO CONTACT POSITION 1. 6. PCB PAD, TIN PLATED OR TIN PLATED WITH GOLD FLASH. 7. FURTHER DETAILS REFER TO ELCO SPECIFICATION 201-01-144. SUGGESTED PCB LAYOUT PADS THE SAME UPPER AND LOWER FACES PCB THICKNESS 1.60±0.10MM (OVER PADS) 2 Open Ended Card Edge: BTB 00-9159 INTERCONNECT 6 WAY SINGLE PART PCB STRIP CONNECTOR – OPEN ENDED SECTION VIEW THROUGH CONTACT POSITION NOTES: 1. INSULATOR MATERIAL NYLON 46, UL94 V-0. COLOR REFER TO PAGE 1. 2. CONTACT MATERIAL COPPER ALLOY, TIN PLATED 3. PARTS TO BE SUPPLIED IN BAGS, 1000 PIECES PER BAG. 4. GENERAL TOLERANCE ±0.20MM UNLESS STATED. 5. ARROW ADJACENT TO CONTACT POSITION 1. 6. PCB PAD, TIN PLATED OR TIN PLATED WITH GOLD FLASH. 7. FURTHER DETAILS REFER TO ELCO SPECIFICATION 201-01-144. SUGGESTED PCB LAYOUT PADS THE SAME UPPER AND LOWER FACES PCB THICKNESS 1.60±0.10MM (OVER PADS) 3 Open Ended Card Edge: BTB 00-9159 INTERCONNECT 8 WAY SINGLE PART PCB STRIP CONNECTOR – OPEN ENDED SECTION VIEW THROUGH CONTACT POSITION NOTES: 1. INSULATOR MATERIAL NYLON 46, UL94 V-0. COLOR REFER TO PAGE 1. 2. CONTACT MATERIAL COPPER ALLOY, TIN PLATED 3. PARTS TO BE SUPPLIED IN BAGS, 1000 PIECES PER BAG. 4. GENERAL TOLERANCE ±0.20MM UNLESS STATED. 5. ARROW ADJACENT TO CONTACT POSITION 1. 6. PCB PAD, TIN PLATED OR TIN PLATED WITH GOLD FLASH. 7. FURTHER DETAILS REFER TO ELCO SPECIFICATION 201-01-144. SUGGESTED PCB LAYOUT PADS THE SAME UPPER AND LOWER FACES PCB THICKNESS 1.60±0.10MM (OVER PADS) 4 Open Ended Card Edge: BTB 00-9159 INTERCONNECT 10 WAY SINGLE PART PCB STRIP CONNECTOR – OPEN ENDED SECTION VIEW THROUGH CONTACT POSITION NOTES: 1. INSULATOR MATERIAL NYLON 46, UL94 V-0. COLOR REFER TO PAGE 1. 2. CONTACT MATERIAL COPPER ALLOY, TIN PLATED 3. PARTS TO BE SUPPLIED IN BAGS, 1000 PIECES PER BAG. 4. GENERAL TOLERANCE ±0.20MM UNLESS STATED. 5. ARROW ADJACENT TO CONTACT POSITION 1. 6. PCB PAD, TIN PLATED OR TIN PLATED WITH GOLD FLASH. 7. FURTHER DETAILS REFER TO ELCO SPECIFICATION 201-01-144. SUGGESTED PCB LAYOUT PADS THE SAME UPPER AND LOWER FACES PCB THICKNESS 1.60±0.10MM (OVER PADS) 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kyocera AVX: 009159008061916 009159004061916 009159006061916 009159010061916 009159008061816 009159006061911 009159010061911