04025J3R3BBSTR

Thin-Film RF/Microwave Capacitor Technology Accu-P® Series Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low frequencies. Physical size imparts inductance to the capacitor and dielectric and metal electrodes result in resistive losses, but these often are of negligible effect on the circuit. At the very high frequencies of radio communication (>100MHz) and satellite systems (>1GHz), these effects become important. Recognizing that a real capacitor will exhibit inductive and resistive impedances in addition to capacitance, the ideal capacitor for these high frequencies is an ultra low loss component which can be fully characterized in all parameters with total repeatability from unit to unit. THIN-FILM TECHNOLOGY Thin-film technology is commonly used in producing semiconductor devices. In the last two decades, this technology has developed tremendously, both in performance and in process control. Today’s techniques enable line definitions of below 1μm, and the controlling of thickness of layers at 100Å (10-2μm). Applying this technology to the manufacture of capacitors has enabled the development of components where both electrical and physical properties can be tightly controlled. The thin-film production facilities at KYOCERA AVX consist of: Until recently, most high frequency/microwave capacitors were based on fired-ceramic (porcelain) technology. Layers of ceramic dielectric material and metal alloy electrode paste are interleaved and then sintered in a high temperature oven. This technology exhibits component variability in dielectric quality (losses, dielectric constant and insulation resistance), variability in electrode conductivity and variability in physical size (affecting inductance). An alternate thin-film technology has been developed which virtually eliminates these variances. It is this technology which has been fully incorporated into Accu-P® and Accu-P® to provide high frequency capacitors exhibiting truly ideal characteristics. The main features of Accu-P® may be summarized as follows: • Class 1000 clean rooms, with working areas under laminar-flow hoods of class 100, (below 100 particles per cubic foot larger than 0.5μm). • High vacuum metal deposition systems for high-purity electrode construction. • Photolithography equipment for line definition down to 2.0μm accuracy. • Plasma-enhanced CVD for various dielectric depositions (CVD=Chemical Vapor Deposition). • High accuracy, microprocessor-controlled dicing saws for chip separation. • High speed, high accuracy sorting to ensure strict tolerance adherence. • High purity of electrodes for very low and repeatable ESR. • Highly pure, low-K dielectric for high breakdown field, high insulation resistance and low losses to frequencies above 40GHz. • Very tight dimensional control for uniform inductance, unit to unit. • Very tight capacitance tolerances for high frequency signal applications. This accuracy sets apart these Thin-Film capacitors from ceramic capacitors so that the term Accu has been employed as the designation for this series of devices, an abbreviation for “accurate.” Orientation Marking Alumina (Al 2O3) Electrode Seal (SiNO) Dielectric (SiO2 / SiNO) Electrode Alumina (Al 2O3) Terminations ACCU-P® CAPACITOR STRUCTURE 2 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012419 – rf microwave products – Thin-Film RF/Microwave Capacitor Technology Accu-P® Series Thin-Film Technology ACCU-P® TECHNOLOGY APPLICATIONS The use of very low-loss dielectric materials, silicon dioxide and silicon oxynitride, in conjunction with highly conductive electrode metals results in low ESR and high Q. These high-frequency characteristics change at a slower rate with increasing frequency than for ceramic microwave capacitors. • Cellular Communications • CT2/PCN (Cordless Telephone/Personal Comm. Networks) • Satellite TV • Cable TV • GPS (Global Positioning Systems) • Vehicle Location Systems • Vehicle Alarm Systems • Paging Because of the thin-film technology, the above-mentioned frequency characteristics are obtained without significant compromise of properties required for surface mounting. The main Accu-P® properties are: • • • • • • Internationally agreed sizes with excellent dimensional control. Ultra small size chip capacitors (1005) are available. Ultra tight capacitance tolerances. Low ESR at VHF, UHF and microwave frequencies. Enhanced RF power handling capablity. High stability with respect to time, temperature, frequency and voltage variation. • Nickel/solder-coated terminations to provide excellent solderability and leach resistance. • Military Communications • Radar Systems • Video Switching • Test & Measurements • Filters • VCO’s • Matching Networks • RF Amplifiers APPROVALS • ISO 9001 • IATF 16949:2016 ACCU-P® FEATURES Accu-P® meets the fast-growing demand for low-loss (high-Q) capacitors for use in surface mount technology especially for the mobile communications market, such as cellular radio of 450 and 900 MHz, UHF walkie-talkies, UHF cordless telephones to 2.3 GHz, low noise blocks at 11-12.5 GHz and for other VHF, UHF and microwave applications. Accu-P® is currently unique in its ability to offer very low capacitance values (0.05pF) and very tight capacitance tolerances (±0.01pF). • The RF power handling capability of the Accu-P® allows for its usage in both small signal and RF power applications. • Thin Film Technology guarantees minimal batch to batch variability of parameters at high frequency. • Inspection test and quality control procedures in accordance with ISO 9001, CECC, IECQ and USA MIL Standards yield products of the highest quality. • Hand soldering Accu-P®: Due to their construction utilizing relatively high thermal conductivity materials, Accu-P’s have become the preferred device in R & D labs and production environments where hand soldering is used. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012521 – rf microwave products – 3 Thin-Film RF/Microwave Capacitor Technology Accu-P® Series Thin-Film Chip Capacitors ACCU-P® (SIGNAL AND POWER TYPE CAPACITORS) L W T 01005* 0201* 0402* 0603* 0805* 1210 0.405±0.020 (0.016±0.001) 0.215±0.020 (0.0085±0.002) 0.145±0.020 (0.006±0.001) 0.60±0.05 (0.023±0.002) 0.325±0.050 (0.0128±0.002) 0.225±0.050 (0.009±0.002) 1.00±0.1 (0.039±0.004) 0.55±0.07 (0.022±0.003) 0.40±0.1 (0.016±0.004) 1.60±0.1 (0.063±0.004) 0.81±0.1 (0.032±0.004) 0.63±0.1 (0.025±0.004) 2.01±0.1 (0.079±0.004) 1.27±0.1 (0.050±0.004) 0.93±0.2 (0.036±0.008) 3.02±0.1 (0.119±0.004) 2.5±0.1 (0.100±0.004) 0.93±0.2 (0.036±0.008) 0.00 -0.0 ) (0.004 +0.004 -0.000 ) 0.15±0.05 (0.000±0.002) 0.10±0.10 (0.004±0.004) (0.0 -0.0 ) (0.00 +0.004 -0.000 ) 0.35±0.15 (0.014±0.006) 0.30±0.1 (0.012±0.004) 0.43±0.1 (0.017±0.004) 0.15±0.05 (0.006±0.002) 0.20±0.1 (0.008±0.004) 0.35±0.15 (0.014±0.006) 0.30±0.1 (0.012±0.004) 0.43±0.1 (0.017±0.004) +0.1 B1 B2 +0.1 *Mount Black Side Up DIMENSIONS: millimeters (inches) HOW TO ORDER 0402 3 J 4R7 A Size Voltage Te erature Coefficient (1) Capacitance Capacitance expressed in pF. (2 significant digits + number of zeros) for values