069177701602001

STANDARD 14-20 AWG: 00-9177 General Information The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. The simplicity of inserting a wire into the connector with a small tool allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these connectors are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the housing has been designed to grab the insulation of the wire to provide a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The 9177 series accepts 14 AWG to 20 AWG wires with an insulation diameter ranging from 2.75mm to 4.25mm. These dual contact connectors support a 15 amp current rating with two large SMT solder tails per wire to provide maximum stability on the PCB. Available in 1p3p configuration, these connectors can be end stackable for higher pin counts. FEATURES AND BENEFITS APPLICATIONS • Connecting discrete wire components directly to the PCB • Bringing power and signals onto a PCB • Daisy chaining PCB’s together to create a continuous string of boards • Application Notes: refer to 201-01-124 • • • • • • IDC contact provides a gas-tight connection to the PCB for long term reliability Connector housing captures the wire insulation for positive strain relief Tested to automotive levels on shock, vibration and temperature cycling for reliability Low and high volume assembly tools to match production volumes Reduced total applied cost versus solder or crimp processes High temperature insulator capable to 260ºC reflow soldering processes ELECTRICAL ENVIRONMENTAL MECHANICAL • Current Rating: 15 Amp / Contact • Voltage Rating: 600 VAC • Operating Temperature: -40ºC to +125ºC • • • • HOW TO ORDER 00 9177 00X Prefix Series Number of Ways No of Code Ways 001 1 002 2 003 3 Insulator Material: Nylon 46: UL94V0 Contact Material: Phosphor Bronze Plating: Tin over Nickel Durability: 3 Cycles 0XX X Wire Gauge Size Details Page 62 Page 63 Page 64 Accepted Code Wire Gauge 001 14 AWG Solid or Stranded 012 16 AWG Solid or Stranded 022 18 AWG Solid or Stranded 033 20 AWG Solid or Stranded 06 Color/Approval Wire Insulation Ø 4.25 Ø 3.50 Ø 3.50 Ø 2.75 Code Color 0 Black 1 8 9 Approval Special Order - NON-UL White Special Order - NON-UL Black Special Order - UL APPROVED White Standard - UL APPROVED 06 = Plating Option Pure Tin all Over HOW TO ORDER – CAP OPTIONS – THROUGH WIRE 00 9177 00X 0XX Prefix 60 = Cap Series Number of Ways Wire Gauge Size No of Code Ways 001 1 002 2 003 3 Code 027 035 042 X00 Insulator Color Wire Insulator A B Diameter (Note 3) 2.10mm - 2.75mm Ø2.75 2.00 2.75mm - 3.50mm Ø3.50 2.65 3.50mm - 4.25mm Ø4.25 3.40 Code Color 000 Black 100 White HOW TO ORDER – CAP OPTIONS – WIRE STOP 60 9177 00X 0XX Prefix 60 = Cap Series Number of Ways Wire Gauge Size No of Code Ways 001 1 002 2 003 3 Code 027 035 042 X00 Insulator Color Wire Insulator A B Diameter (Note 3) 2.10mm - 2.75mm Ø2.75 2.00 2.75mm - 3.50mm Ø3.50 2.65 3.50mm - 4.25mm Ø4.25 3.40 Code Color 099 Black 199 White Certification: UL File # E320991, check UL conditions of use for specific ratings and details The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 63 STANDARD 14-20 AWG: 00-9177 General Information CONNECTOR/TOOLING PART NUMBER MATRIX AWG 14 14 14 14 14 14 16 16 16 16 16 16 18 18 18 18 18 18 20 20 20 20 20 20 64 SERIES 9177 IDC HAND INSERTION TOOLING* ACCESSORY CAPS Wire Plastic Metal Positions Color Part Number Through Wire Wire Stop Insulation (low volume) (high volume) Ø 4.25 1p White 009177001001106 069177701601001 069177701701001 609177001042100 609177001042199 Ø 4.25 1p Black 009177001001006 069177701601001 069177701701001 609177001042000 609177001042099 Ø 4.25 2p White 009177002001106 069177701601002 069177701701002 609177002042100 609177002042199 Ø 4.25 2p Black 009177002001006 069177701601002 069177701701002 609177002042000 609177002042099 Ø 4.25 3p White 009177003001106 069177701601003 069177701701003 609177003042100 609177003042199 Ø 4.25 3p Black 009177003001006 069177701601003 069177701701003 609177003042000 609177003042099 Ø 3.50 1p White 009177001012106 069177701602001 069177701702001 609177001035100 609177001035199 Ø 3.50 1p Black 009177001012006 069177701602001 069177701702001 609177001035000 609177001035099 Ø 3.50 2p White 009177002012106 069177701602002 069177701702002 609177002035100 609177002035199 Ø 3.50 2p Black 009177002012006 069177701602002 069177701702002 609177002035000 609177002035099 Ø 3.50 3p White 009177003012106 069177701602003 069177701702003 609177003035100 609177003035199 Ø 3.50 3p Black 009177003012006 069177701602003 069177701702003 609177003035000 609177003035099 Ø 3.50 1p White 009177001022106 069177701602001 069177701702001 609177001035100 609177001035199 Ø 3.50 1p Black 009177001022006 069177701602001 069177701702001 609177001035000 609177001035099 Ø 3.50 2p White 009177002022106 069177701602002 069177701702002 609177002035100 609177002035199 Ø 3.50 2p Black 009177002022006 069177701602002 069177701702002 609177002035000 609177002035099 Ø 3.50 3p White 009177003022106 069177701602003 069177701702003 609177003035100 609177003035199 Ø 3.50 3p Black 009177003022006 069177701602003 069177701702003 609177003035000 609177003035099 Ø 2.75 1p White 009177001033106 069177701603001 069177701703001 609177001027100 609177001027199 Ø 2.75 1p Black 009177001033006 069177701603001 069177701703001 609177001027000 609177001027099 Ø 2.75 2p White 009177002033106 069177701603002 069177701703002 609177002027100 609177002027199 Ø 2.75 2p Black 009177002033006 069177701603002 069177701703002 609177002027000 609177002027099 Ø 2.75 3p White 009177003033106 069177701603003 069177701703003 609177003027100 609177003027199 Ø 2.75 3p Black 009177003033006 069177701603003 069177701703003 609177003027000 609177003027099 * Insertion Tooling - Requires Hand Press with Flat Rock Plates; Consult Application Notes 201-01-124 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – STANDARD 14-20 AWG: 00-9177 1 Position 14-20 AWG 1 WAY IDC CONNECTOR Pick and place area 2.375 x 9.00mm MIN NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMP NYLON 46, COLOUR REFER TO SHEET 1. 3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 14AWG AND 20AWG SOLID AND STRANDED WIRE. 4. ALL DIMENSIONS ±0.20 UNLESS TOLERANCED 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-109, UL COMPONENTS REFER TO ELCO SPEC 201-01-109UL. 6. APPLICATION NOTES 201-01-124 7. FOR UL PRODUCT CODES UL REFERENCE E320991. 8. FOR PCB SPACE RESTRICTED BY ASSEMBLY TOOLING REFER TO SHEET 6 Code Accepted Wire Gauge A 001 012 022 033 14 AWG Solid or Stranded 16 AWG Solid or Stranded 18 AWG Solid or Stranded 20 AWG Solid or Stranded 1.10 0.82 0.72 0.60 Wire Insulation Ø 4.25 max Ø 3.50 max Ø 3.50 max Ø 2.75 max B 4.25 3.50 3.50 2.75 SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER REEL/BOX PACK QTY 400 500MM 400MM 4 1600 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 65 STANDARD 14-20 AWG: 00-9177 2 Position 14-20 AWG 2 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMP NYLON 46, COLOUR REFER TO SHEET 1. 3. CONNECTOR DESIGN TO ACCEPT BETWEEN 14AWG AND 20AWG SOLID AND STRANDED WIRE. 4. ALL DIMENSIONS ±0.20 UNLESS TOLLERANCED. 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-109, UL COMPONENTS REFER TO ELCO SPEC 201-01-109UL. 6. APPLICATION NTOES 201-01-124. 7. FOR UL PRODUCT CODES UL REFERENCE E320991 8. FOR PCB SPACE RESTRICTED BY ASSEMBLY TOOLING REFER TO SHEET 6 Code 001 012 022 033 Accepted Wire Gauge 14 AWG Solid or Stranded 16 AWG Solid or Stranded 18 AWG Solid or Stranded 20 AWG Solid or Stranded A Wire Insulation 1.10 Ø 4.25 max 0.82 Ø 3.50 max 0.72 Ø 3.50 max 0.60 Ø 2.75 max SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER REEL DIAMETER 66 400 500mm 400mm 330mm The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – B 4.25 3.50 3.50 2.75 STANDARD 14-20 AWG: 00-9177 3 Position 14-20 AWG 3 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMP NYLON 46, COLOUR REFER TO SHEET 1 3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 14AWG AND 20AWG SOLID AND STRANDED WIRE. 4. ALL DIMENSIONS ±0.20 UNLESS TOLERANCED. 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-109, UL COMPONENTS REFER TO ELCO SPEC 201-01-109UL. 6. APPLICATION NOTES 201-01-124. 7. FOR UL PRODUCT CODES UL REFERENCE E320991. 8. FOR PCO SPACE RESTICTED BY ASSEMBLY TOOLING REFER TO SHEET 6 Code 001 012 022 033 Accepted Wire Gauge 14 AWG Solid or Stranded 16 AWG Solid or Stranded 18 AWG Solid or Stranded 20 AWG Solid or Stranded A Wire Insulation B 1.10 Ø 4.25 max 4.25 0.82 Ø 3.50 max 3.50 0.72 Ø 3.50 max 3.50 0.60 Ø 2.75 max 2.75 SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER REEL DIAMETER 400 500mm 400mm 330mm The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 67 STANDARD 14-20 AWG: 00-9177 Assessory Cap - Through Wire ACCESSORY CAP – THROUGH WIRE HOW TO ORDER 60 9177 00X Code 001 002 003 0XX No of Ways 1 2 3 Code 027 035 042 X00 Wire Insulation Diameter "A" "B" (Note 3) 2.10mm - 2.75mm ø 2.75 2.00 2.75mm - 3.50mm ø 3.50 2.65 3.50mm - 4.25mm ø 4.25 3.40 Code COLOUR 000 100 Black White ASSEMBLED DIMENSIONS NOTES: 1. CAP FOR 9177 IDC WIRE TO BOARD CONNECTOR. 2. THROUGH WIRE CAP CAN BE USED AT ANY POSITION ALONG WIRE. 3. REFERS TO CAP, FOR WIRE MATCH TO CONNECTOR REFER TO TABLE ON SHEET 4. MATERIAL: GLASS FILLED NYLON 46, FOR COLOUR REFER TO TABLE 5. CAPS DESIGNED TO ACCOODATE INSULATION DIAMETERS REFER TO TABLE. 6. GENERAL TOLERANCE ±0.20mm. 7. PACKED IN BAGS, 400 PIECES PER BAG 8. APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-124 68 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – STANDARD 14-20 AWG: 00-9177 Assessory Cap - Wire Stop ACCESSORY CAP – WIRE STOP ASSEMBLED DIMENSIONS NOTES: 1. CAP FOR 9177 IDC WIRE TO BOARD CONNECTOR. 2. THROUGH WIRE CAP CAN BE USED AT ANY POSITION ALONG WIRE. 3. REFERS TO CAP, FOR WIRE MATCH TO CONNECTOR REFER TO TABLE ON PAGE 60. 4. MATERIAL: GLASS FILLED NYLON 46. FOR COLOR REFER TO PAGE 60. 5. CAPS DESIGNED TO ACCOMMODATE INSULATION DIAMETERS REFER TO PAGE 60. 6. GENERAL TOLERANCE ±0.20MM. 7. PACKED IN BAGS, 400 PIECES PER BAG. 8. APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-124. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 69 STANDARD 14-20 AWG: 00-9177 Insertion Tooling INSERTION TOOLING – REQUIRES HAND PRESS WITH FLAT ROCK PLATES 1 WAY 2 WAY HIGH PRODUCTION MEDIUM PRODUCTION Metal No. of Ways 1 2 3 Max Insulation Dia (AWG) ø 4.25 ø 3.50 ø 2.75 ø 4.25 ø 3.50 ø 2.75 ø 4.25 ø 3.50 ø 2.75 3 WAY Plastic No. of Ways Tool Part Number 06-9177-7017-01-001 06-9177-7017-02-001 06-9177-7017-03-001 06-9177-7017-01-002 06-9177-7017-02-002 06-9177-7017-03-002 06-9177-7017-01-003 06-9177-7017-02-003 06-9177-7017-03-003 1 2 3 Max Insulation Dia (AWG) ø 4.25 ø 3.50 ø 2.75 ø 4.25 ø 3.50 ø 2.75 ø 4.25 ø 3.50 ø 2.75 Tool Part Number 06-9177-7016-01-001 06-9177-7016-02-001 06-9177-7016-03-001 06-9177-7016-01-002 06-9177-7016-02-002 06-9177-7016-03-002 06-9177-7016-01-003 06-9177-7016-02-003 06-9177-7016-03- 003 The assembly tooling restricts the available space/component heights on the PCB. For details see below. NOTES: 1. ALL DIMENSIONS FOR REFERENCE DIMENSIONS. 2. MAXIMUM COMPONENT HEIGHT 0.80MM IN THIS AREA. 3. MAXIMUM COMPONENT HEIGHT 11.00 MM IN THIS AREA. 4. THE SAME RESTRICTIONS APPLY TO ALL WIRE INSULATION DIAMETERS. INSERTION TOOLING – PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING 1 WAY 2 WAY 3 WAY 70 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – STANDARD 14-20 AWG: 00-9177 Assembled Connector STANDARD CONNECTOR CONNECTOR WITH CAP NOTES: 1. ASSEMBLED HEIGHTS INCLUDE 0.10mm ALLOWANCE FOR PAD AND SOLDER THICKNESS, NO ALLOWANCE HAS BEEN MADE FOR ANY SOLDER RESIST OR OTHER FEATURES. 2. WHEN THE WIRE IS ASSEMBLED THE INSULATION SHOULD BE TRAPPED BY THESE EDGES. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 71