08055C474JAT2A

X7R Dielectric General Specifications X7R formulations are called “temperature stable” ceramics and fall into EIA Class II materials. X7R is the most popular of these intermediate dielectric constant materials. Its temperature variation of capacitance is within ±15% from -55°C to +125°C. This capacitance change is non-linear. Capacitance for X7R varies under the influence of electrical operating con-ditions such as voltage and frequency. X7R dielectric chip usage covers the broad spectrum of industrial applications where known changes in capacitance due to applied voltages are acceptable. PART NUMBER (SEE PAGE 4 FOR COMPLETE PART NUMBER EXPLANATION) 0805 5 С 103 M A T 2 A Size (L” x W”) Voltage 4V = 4 6.3V = 6 10V = Z 16V = Y 25V = 3 50V = 5 100V = 1 200V = 2 500V = 7 Dielectric X7R = C Capacitance Code (In pF) 2 Sig. Digits + Number of Zeros Capacitance Tolerance J = ± 5%* K = ±10% M = ± 20% Failure Rate A = Not Applicable Terminations T = Plated Ni and Sn Z= FLEXITERM®** Packaging 2 = 7” Reel 4 = 13” Reel *Optional termination Contact Factory For Multiples Special Code A = Std. Product *≤1μF only, contact factory for additional values **See FLEXITERM® X7R section NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers. Contact factory for non-specified capacitance values. 18 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 100819 X7R Dielectric Specifications and Test Methods Parameter/Test Operating Temperature Range Capacitance Dissipation Factor Insulation Resistance Dielectric Strength Resistance to Flexure Stresses Appearance Capacitance Variation Dissipation Factor Insulation Resistance Solderability Resistance to Solder Heat Thermal Shock Load Life Appearance Capacitance Variation Dissipation Factor No breakdown or visual defects Charge device with 250% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA (max) Note: Charge device with 150% of rated voltage for 500V devices. No defects ≤ ±12% Meets Initial Values (As Above) ≥ 95% of each terminal should be covered with fresh solder No defects, 10µF, 0.5Vrm @ 120Hz Charge device with rated voltage for 120 ± 5 secs @ room temp/humidity Meets Initial Values (As Above) Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength Appearance Capacitance Variation Dissipation Factor Insulation Resistance Measuring Conditions Temperature Cycle Chamber 100,000MΩ or 1000MΩ - µF, whichever is less Insulation Resistance Dielectric Strength Load Humidity X7R Specification Limits -55ºC to +125ºC Within specified tolerance ≤ 10% for ≥ 50V DC rating≤ 12.5% for 25V DC rating ≤ 12.5% for 25V and 16V DC rating ≤ 12.5% for ≤ 10V DC rating Contact Factory for DF by PN No visual defects Dip device in eutectic solder at 260ºC for 60 seconds. Store at room temperature for 24 ± 2hours before measuring electrical properties. Step 1: -55ºC ± 2º 30 ± 3 minutes ≤ ±7.5% Step 2: Room Temp ≤ 3 minutes Meets Initial Values (As Above) Step 3: +125ºC ± 2º 30 ± 3 minutes Meets Initial Values (As Above) Step 4: Room Temp ≤ 3 minutes Meets Initial Values (As Above) No visual defects ≤ ±12.5% ≤ Initial Value x 2.0 (See Above) Repeat for 5 cycles and measure after 24 ± 2 hours at room temperature Charge device with 1.5 rated voltage (≤ 10V) in test chamber set at 125ºC ± 2ºC for 1000 hours (+48, -0) ≥ Initial Value x 0.3 (See Above) If RV > 10V then Life Test voltage will be 2xRV but there are exceptions (please contact AVX for further details on exceptions) Meets Initial Values (As Above) Remove from test chamber and stabilize at room temperature for 24 ± 2 hours before measuring. No visual defects ≤ ±12.5% ≤ Initial Value x 2.0 (See Above) ≥ Initial Value x 0.3 (See Above) Meets Initial Values (As Above) Store in a test chamber set at 85ºC ± 2ºC/ 85% ± 5% relative humidity for 1000 hours (+48, -0) with rated voltage applied. Remove from chamber and stabilize at room temperature and humidity for 24 ± 2 hours before measuring. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 121219 19 X7R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED SIZE Soldering Packaging (L) Length W) Width (t) Terminal 0101* 0201 0402 0603 0805 1206 Reflow Only Reflow Only Reflow/Wave Reflow/Wave Reflow/Wave Reflow/Wave Paper/Embossed Paper/Embossed All Paper All Paper All Paper Paper/Embossed mm 0.40 ± 0.02 0.60 ± 0.09 1.00 ± 0.10 1.60 ± 0.15 2.01 ± 0.20 3.20 ± 0.20 (in.) (0.016 ± 0.0008) (0.024 ± 0.004) (0.040 ± 0.004) (0.063 ± 0.006) (0.079 ± 0.008) (0.126 ± 0.008) mm 0.20 ± 0.02 0.30 ± 0.09 0.50 ± 0.10 0.81 ± 0.15 1.25 ± 0.20 1.60 ± 0.20 (in.) (0.008 ± 0.0008) (0.011 ± 0.004) (0.020 ± 0.004) (0.032 ± 0.006) (0.049 ± 0.008) (0.063 ± 0.008) mm 0.10± 0.04 0.15 ± 0.05 0.25 ± 0.15 0.35 ± 0.15 0.50 ± 0.25 0.50 ± 0.25 (in.) (0.004 ± 0.0016) (0.006 ± 0.002) (0.010 ± 0.006) (0.014 ± 0.006) (0.020 ± 0.010) (0.020 ± 0.010) 16 6.3 10 16 25 50 16 25 50 50 100 200 Cap WVDC 100 101 B A A A A A C C C G G G (pF) 150 151 B A A A A A C C C G G G 220 221 B A A A A A C C C G G G 330 331 B A A A A A C C C G G G A 470 471 B A A A A 680 681 B A A A A 1000 102 B A A A A 6.3 10 C 6.3 10 16 25 250 6.3 10 16 25 50 100 200 E E E E E E E J J J J J 250 6.3 10 16 25 50 100 200 250 J 500 K C C C G G G J J J J J J K C C C G G G J J J J J J K C C C G G G J J J J J J G J J K 1500 152 B A A A A C C C C G G J G J J J J J J J J J J J J J J M 2200 222 B A A A A C C C C G G J G J J J J J J J J J J J J J J M 3300 332 A A A A C C C C G G J G J J J J J J J J J J J J J J M 4700 472 A A A A C C C C G G J G J J J J J J J J J J J J J J M 6800 682 A A A A C C C C G G J G J J J J J J J J J J J J J J P Cap 0.01 103 A A A A C C C C G G G J G J J J J J J J J J J J J J J P (μF) 0.015 153 C C C C G G G J J J J J J J N J J J J J M J Q 0.022 223 C C C C G G G J J J J J N N J J J J J M J Q 0.033 333 C C C C G G J J J J J N N N J J J J J M J Q 0.047 473 C C C C G G G J J J J J N N N J J J J J M M 0.068 683 C C C C M 0.1 104 C C C C 0.15 154 0.22 224 0.33 334 0.47 474 0.68 684 1.0 105 2.2 G G G J J J J J N N J J J J J P G G G G J J J J J N N J J J J P P P G G G G J J J J N N J J J J Q Q Q G G J J J J J N N N J J J J Q Q Q J J J J J N N N N N J J M P Q J J J J J N N N N N M M M P Q J J J N N N M M J J J J J N N N N M M M Q Q 225 J J J P P P P** Q Q Q Q Q** 4.7 475 J P P P Q Q Q Z 10 106 P P Q Q X 22 226 X Q Q 47 476 100 107 6.3 10 16 200 250 C C C C C C P WVDC 16 SIZE 0101* 6.3 10 16 25 50 6.3 10 0201 16 25 50 6.3 10 16 0402 25 50 100 200 250 6.3 10 0603 16 25 50 100 200 250 25 0805 Letter A B C E G J K M N P Q X Y Z Max. Thickness 0.33 (0.013) 0.22 (0.009) 0.56 (0.022) 0.71 (0.028) 0.90 (0.035) 0.94 (0.037) 1.02 (0.040) 1.27 (0.050) 1.40 (0.055) 1.52 (0.060) 1.78 (0.070) 2.29 (0.090) 2.54 (0.100) 2.79 (0.110) PAPER EMBOSSED NOTE: Contact factory for non-specified capacitance values *EIA 01005 **Contact Factory for Specifications 20 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 050420 50 100 1206 500 X7R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED SIZE 1210 1812 1825 2220 2225 Soldering Reflow Only Reflow Only Reflow Only Reflow Only Reflow Only Packaging Paper/Embossed All Embossed All Embossed All Embossed All Embossed mm (in.) mm 3.30 ± 0.4 (0.130± 0.016) 2.50 ± 0.30 4.50 ± 0.30 (0.177 ± 0.012) 3.20 ± 0.20 4.50 ± 0.30 (0.177 ± 0.012) 6.40 ± 0.40 5.70 ± 0.50 (0.224 ± 0.020) 5.00 ± 0.40 5.72 ± 0.25 (0.225 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) (L) Length W) Width (t) Terminal (in.) (0.098 ± 0.012) (0.126 ± 0.008) (0.252 ± 0.016) (0.197 ± 0.016) mm 0.50 ± 0.25 0.61 ± 0.36 0.61 ± 0.36 0.64 ± 0.39 0.64 ± 0.39 (in.) (0.020 ± 0.010) (0.024 ± 0.014) (0.024 ± 0.014) (0.025 ± 0.015) (0.025 ± 0.015) WVDC Cap 100 101 (pF) 150 151 220 221 330 331 470 471 680 681 1000 102 10 16 25 50 100 200 500 1500 152 J J J J J J M 2200 222 J J J J J J M 3300 332 J J J J J J M 4700 472 J J J J J J M 16 25 50 100 200 500 50 100 200 25 50 100 200 500 50 100 200 6800 682 J J J J J J M Cap 0.01 103 J J J J J J M K K K K K M M M X X X X M P P (μF) 0.015 153 J J J J J J P K K K K M M M M X X X X M P P 0.022 223 J J J J J J Q K K K K P M M M X X X X M P P 0.033 333 J J J J J J Q K K K K X M M M X X X X M P P P 0.047 473 J J J J J J Q K K K K X M M M X X X X M P 0.058 683 J J J J J M Q K K K K X M M M X X X X M P P 0.1 104 J J J J J M X K K K K X M M M X X X X M P P 0.15 154 J J J J M Z K K K P Z M M M X X X X M P X 0.22 224 J J J J P Z K K K P Z M M M X X X X M P X 0.33 334 J J J J Q K K M X Z M M X X X X M P X 0.47 474 M M M M Q K K P X Z M M X X X X M P X 0.68 684 M M P X X M M Q M P X X M P X M P 1.0 105 N N P X Z M M X 1.5 155 N N Z Z Z Z Z Z 2.2 225 X X Z Z Z Z Z 3.3 335 X X Z Z Z Z Z Z Z Z 4.7 475 Z Z Z Z 10 106 Z Z Z Z 22 226 Z Z Z 47 476 Z 100 107 16 25 WVDC 10 SIZE Z X X M P X X X M X Z Z X X M X Z Z X Z Z Z Z Z 100 200 Q Z Z 50 100 200 500 16 25 1210 50 100 200 500 50 1812 100 200 25 50 1825 100 Letter A B C E G J K M N P Q X Y Z Max. Thickness 0.33 (0.013) 0.22 (0.009) 0.56 (0.022) 0.71 (0.028) 0.90 (0.035) 0.94 (0.037) 1.02 (0.040) 1.27 (0.050) 1.40 (0.055) 1.52 (0.060) 1.78 (0.070) 2.29 (0.090) 2.54 (0.100) 2.79 (0.110) PAPER 200 2220 500 50 2225 EMBOSSED NOTE: Contact factory for non-specified capacitance values The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 011320 21