1001932PT-AC10L0200

DATASHEET Part No. 1001932PT Product: PCB Wi-Fi Tunable Embedded Antenna with Cable Part No. 1001932PT WLAN / BT / Zigbee / Wi-Fi 6E Tunable Embedded PCB Antenna 2.4 GHz, 5 GHz, 6 GHz, 7 GHz Supports: Wi-Fi applications, Agriculture, Bluetooth, Zigbee, WLAN, Smart Home, Healthcare, Digital Signage KYOCERA AVX WLAN antennas deliver on the key needs of device designers for higher functionality and performance in smaller/thinner designs. These innovative antennas provide compelling advantages for a 2.4 GHz, 5.0 GHz, 6.0 GHz, and 7.0 GHz enabled devices. Real-World Performance and Implementation Antennas may look alike on the outside, but the important difference is inside. Other antennas may contain simple PIFA or monopole designs that interact with their surroundings, complicating layout or changing performance with use position. KYOCERA AVX antennas utilize patented Isolated Magnetic Dipole (IMD) technology to deliver a unique size and performance combination. PCB Wi-Fi Tunable Embedded Antenna with Cable 2.4 GHz; 5 GHz; 6 GHz; 7 GHz KEY BENEFITS Stay-in-Tune KYOCERA AVX antenna technology provides superior RF field containment, resulting in less interaction with surrounding components. Quicker Time-to-Market By optimizing antenna size, performance and emissions, customer and regulatory specifications are more easily met. Environmental Compliance Products are the latest RoHS version compliant. The 1001932PT is offered in many standard cable lengths ranging from 25 mm up to 500 mm. Standard connector options offered in MHF and MHF4L compatibility. Ordering part number guide is located at end of document for selection ease. Electrical Specifications Typical Performance using 100 mm cable tested on PC-ABS Frequency (GHz) 2.400 – 2.485 4.900 – 5.825 5.925 – 7.125 Peak Gain Average Efficiency VSWR Match • • Embedded design Cellular, Headsets, Tablets Gateway, Access Point • • • • • 4.45 dBi 6.11 dBi 61% 82% 63% 2:1 max 2:1 max 2:1 max Feed Point Impedance 50 ohms unbalanced Polarization Linear Power Handling 2.0 Watt CW Mechanical Specifications Ordering Part # Dimensions (mm) APPLICATIONS • 2.03 dBi Weight (grams) Telematics Tracking Healthcare M2M, Industrial devices Smart Grid Cable/Connector (mm) 1001932PT-AA10L0100 35.2 x 8.5 x 0.4 0.8 Length: 100, Diameter: 1.13, Color: Black; MHF (U.FL compatible) connector Mounting Adhesive on bottom side of antenna Packaging PE bags *Additional variations with different cable lengths, colors and connectors are available. 08-Feb-23 TDS-ANT-0004 | Rev 3 Proprietary www.KYOCERA-AVX.com DATASHEET | Part No. 1001932PT WLAN / BT / Zigbee / Wi-Fi 6E Tunable Embedded PCB Antenna Specifications. KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs. VSWR, Efficiency and Peak Gain Plots Typical Performance using 100 mm cable tested on PC-ABS 5 GHz VSWR Frequency (MHz) Frequency (MHz) 2.4 GHz Peak Gain Efficiency (%) Frequency (MHz) 5 GHz Peak Gain 6 / 7 GHz Peak Gain Peak Gain (dBic) Peak Gain (dBic) Peak Gain (dBic) 6 / 7 GHz Efficiency Frequency (MHz) Frequency (MHz) © 2023 KYOCERA AVX Frequency (MHz) 5 GHz Efficiency Efficiency (%) Efficiency (%) 2.4 GHz Efficiency Frequency (MHz) 6 / 7 GHz VSWR VSWR VSWR VSWR 2.4 GHz VSWR Frequency (MHz) TDS-ANT-0004 | Rev 3 Frequency (MHz) tel +(1) 858.550.3820 email: antenna.info@kyocera-avx.com 1 Avx Blvd, Fountain Inn, SC 29644 DATASHEET | Part No. 1001932PT WLAN / BT / Zigbee / Wi-Fi 6E Tunable Embedded PCB Antenna Specifications. KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs. Antenna Radiation Patterns Typical Performance using 100 mm cable tested on PC-ABS Measured @ 2440, 5550 MHz Z X Measured at 2440 MHz Y Z Measured at 5550 MHz Y Y X Y Y X Z © 2023 KYOCERA AVX X Z Z TDS-ANT-0004 | Rev 3 X tel +(1) 858.550.3820 email: antenna.info@kyocera-avx.com 1 Avx Blvd, Fountain Inn, SC 29644 DATASHEET | Part No. 1001932PT WLAN / BT / Zigbee / Wi-Fi 6E Tunable Embedded PCB Antenna Specifications. KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs. Antenna Radiation Patterns Typical Performance using 100 mm cable tested on PC-ABS Measured @ 6425 MHz Z X Measured at 6425 MHz Y Y Y X Z © 2023 KYOCERA AVX Z TDS-ANT-0004 | Rev 3 X tel +(1) 858.550.3820 email: antenna.info@kyocera-avx.com 1 Avx Blvd, Fountain Inn, SC 29644 DATASHEET | Part No. 1001932PT WLAN / BT / Zigbee / Wi-Fi 6E Tunable Embedded PCB Antenna Specifications. KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs. Antenna Tuning Options Typical Performance using 100 mm cable tested on PC-ABS C1 C2 P6 P5 P4 P1 P2 P3 *This antenna has unique features enabling limited range RF tuning by leaving P1 - P6 and C1 - C2 connected by “solder bridge” or disconnected with a “cut” to the trace. Refer to detailed tuning options below. Ref: Baseline = Typical Performance using 100 mm cable tested on PC-ABS Options for Tuning: "2.4GHz (Lower)" MODE PADS T1 Connect: P2 T2 Connect: P1 T3 Connect: P2+P3 T4 Connect: P1+P3 Outcome: (Ref: Baseline) ~200 MHz shift low ~250 MHz shift low ~350 MHz shift low ~370 MHz shift low Options for Tuning: "2.4GHz (Higher)" MODE C1 C2 PADS Outcome: (Ref: Baseline) Cut: C1 ~170 MHz shift high Cut: C2 ~300 MHz shift high Options for Tuning: "5GHz (Lower)" MODE PADS T5 Connect: P4 T6 Connect: P4+P5 T7 Connect: P6 T8 Connect: P5+P6 Outcome: (Ref: Baseline) ~200 MHz shift low ~1500 MHz shift low ~500 MHz shift low ~1900 MHz shift low © 2023 KYOCERA AVX TDS-ANT-0004 | Rev 3 tel +(1) 858.550.3820 email: antenna.info@kyocera-avx.com 1 Avx Blvd, Fountain Inn, SC 29644 DATASHEET | Part No. 1001932PT WLAN / BT / Zigbee / Wi-Fi 6E Tunable Embedded PCB Antenna Specifications. KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs. Mechanical Dimensions & Ordering Part Numbers Typical antenna dimensions in mm. MHF (U.FL compatible) connector Part Number A B C 1001932PT-AA10L0100 (35.2) (8.5) (1.9) 100.0 ± 3.0 1001932PT-AA10L0XXX (35.2) (8.5) (1.9) 25.0 ≤ XXX ˂ 149.0 ± 3.0 1001932PT-AA10L0XXX (35.2) (8.5) (1.9) 149.0 ≤ XXX ˂ 299.0 ± 4.0 (1.9) 299.0 ≤ XXX ≤ 500.0 ± 5.0 1001932PT-AA10L0XXX (35.2) (8.5) *“()” Indicated the dimension is for reference only. D D Cable Length Cable Tolerance B A Top View Top View C Side View *(Adhesive) Bottom View *Total Height of 1.9 mm includes the cable solder connection *Height “C” of 0.4 mm includes PCB + adhesive thicknesses *Dimensions in () parenthesis are Reference Only. © 2023 KYOCERA AVX TDS-ANT-0004 | Rev 3 tel +(1) 858.550.3820 email: antenna.info@kyocera-avx.com 1 Avx Blvd, Fountain Inn, SC 29644 DATASHEET | Part No. 1001932PT WLAN / BT / Zigbee / Wi-Fi 6E Tunable Embedded PCB Antenna Specifications. KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs. Mechanical Dimensions & Ordering Part Numbers Typical antenna dimensions in mm. MHF4L connector Part Number A B C 1001932PT-AC10L0XXX (35.2) (8.5) (1.9) 25.0 ≤ XXX ˂ 149.0 ± 3.0 1001932PT-AC10L0XXX (35.2) (8.5) (1.9) 149.0 ≤ XXX ˂ 299.0 ± 4.0 (1.9) 299.0 ≤ XXX ≤ 500.0 ± 5.0 1001932PT-AC10L0XXX (35.2) (8.5) *“()” Indicated the dimension is for reference only. D D Cable Length Cable Tolerance B A Top View C Side View *(Adhesive) Bottom View *Total Height of 1.9 mm includes the cable solder connection *Height “C” of 0.4 mm includes PCB + adhesive thicknesses *Dimensions in () parenthesis are Reference Only. © 2023 KYOCERA AVX TDS-ANT-0004 | Rev 3 tel +(1) 858.550.3820 email: antenna.info@kyocera-avx.com 1 Avx Blvd, Fountain Inn, SC 29644 DATASHEET | Part No. 1001932PT WLAN / BT / Zigbee / Wi-Fi 6E Tunable Embedded PCB Antenna Specifications. KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs. Mechanical Dimensions & Ordering Part Numbers Typical antenna dimensions in mm. MHF4L connector. Face up connector orientation Part Number A B C 1001932PT-AC10L0070U (35.2) (8.5) *“()” Indicated the dimension is for reference only. (1.9) D D Cable Cable Length Tolerance 70.00 ± 3.0 B A *Face up Connector Top View C Side View *(Adhesive) *Total Height of 1.9 mm includes the cable solder connection *Height “C” of 0.4 mm includes PCB + adhesive thicknesses *Dimensions in () parenthesis are Reference Only. © 2023 KYOCERA AVX Bottom View TDS-ANT-0004 | Rev 3 tel +(1) 858.550.3820 email: antenna.info@kyocera-avx.com 1 Avx Blvd, Fountain Inn, SC 29644