12063G225MAT2A

Y5V Dielectric General Specifications GENERAL DESCRIPTION Y5V formulations are for general-purpose use in a limited temperature range. They have a wide temperature characteristic of +22% –82% capacitance change over the operating temperature range of –30°C to +85°C. These characteristics make Y5V ideal for decoupling applications within limited temperature range. PART NUMBER (SEE PAGE 4 FOR COMPLETE PART NUMBER EXPLANATION) 3 G Size (L” x W”) Voltage 6.3V = 6 10V = Z 16V = Y 25V = 3 50V = 5 Dielectric Y5V = G 104 Capacitance Code (In pF) 2 Sig. Digits + Number of Zeros +20 +10 0 -10 -20 -30 -40 -50 -60 -70 -80 T 2 Failure Rate A = Not Applicable Terminations T = Plated Ni and Sn Packaging 2 = 7” Reel 4 = 13” Reel +40 c/c (%) +20 0 -20 -40 -60 -80 -35 -15 -100 0 +5 +25 +45 +65 +85 +105 +125 Temperature °C 10,000 40 60 80 100 0.1 F - 0603 Impedance vs. Frequency 1,000 1,000 100 0 10 1 0.22 F - 0805 Impedance vs. Frequency 1,000,000 Frequency (Hz) 10,000,000 10 1 0.01 10,000 +30 +40 +50 +60 +70 +80 +90 1,000 1 F - 1206 Impedance vs. Frequency 100 10 1 0.1 0.1 0.1 100,000 +20 Temperature °C 100 100 Special Code A = Std. Product Insulation Resistance vs. Temperature % DC Bias Voltage 1,000 0.01 10,000 20 A 10,000 |Z| (Ohms) -55 |Z| (Ohms) Capacitance % Capacitance Tolerance Z = +80 –20% A Capacitance Change vs. DC Bias Voltage Temperature Coefficient |Z| (Ohms) Z Insulation Resistance (Ohm-Farads) 0805 100,000 1,000,000 Frequency (Hz) 10,000,000 0.01 10,000 100,000 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 101316 1,000,000 10,000,000 Frequency (Hz) 29 Y5V Dielectric Specifications and Test Methods Parameter/Test Y5V Specification Limits Measuring Conditions Operating Temperature Range -30ºC to +85ºC Temperature Cycle Chamber Capacitance Within specified tolerance Dissipation Factor ≤ 5.0% for ≥ 50V DC rating ≤ 7.0% for 25V DC rating ≤ 9.0% for 16V DC rating ≤ 12.5% for ≤ 10V DC rating Freq.: 1.0 kHz ± 10% Voltage: 1.0Vrms ± .2V For Cap > 10 μF, 0.5Vrms @ 120Hz Insulation Resistance 10,000MΩ or 500MΩ - μF, whichever is less Charge device with rated voltage for 120 ± 5 secs @ room temp/humidity Dielectric Strength No breakdown or visual defects Charge device with 250% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA (max) Resistance to Flexure Stresses Appearance No defects Capacitance Variation ≤ ±30% Dissipation Factor Meets Initial Values (As Above) Insulation Resistance ≥ Initial Value x 0.1 Solderability Resistance to Solder Heat Thermal Shock Load Life Load Humidity 30 ≥ 95% of each terminal should be covered with fresh solder Appearance No defects,