Y5V Dielectric
General Specifications
GENERAL DESCRIPTION
Y5V formulations are for general-purpose use in a limited temperature range. They have a wide
temperature characteristic of +22% –82% capacitance change over the operating temperature range
of –30°C to +85°C.
These characteristics make Y5V ideal for decoupling applications within limited temperature range.
PART NUMBER (SEE PAGE 4 FOR COMPLETE PART NUMBER EXPLANATION)
3
G
Size
(L” x W”)
Voltage
6.3V = 6
10V = Z
16V = Y
25V = 3
50V = 5
Dielectric
Y5V = G
104
Capacitance
Code (In pF)
2 Sig. Digits +
Number of
Zeros
2
Failure
Rate
A = Not
Applicable
Terminations
T = Plated Ni
and Sn
Packaging
2 = 7” Reel
4 = 13” Reel
c/c (%)
+20
0
-20
-40
-60
-80
-35 -15
-100
0
+5 +25 +45 +65 +85 +105 +125
Temperature °C
0.1 F - 0603
Impedance vs. Frequency
1,000
1,000
60
80
100
1,000
100
0
10
1
0.22 F - 0805
Impedance vs. Frequency
1,000,000
Frequency (Hz)
10,000,000
10
1
0.01
10,000
+30
+40
+50
+60
+70
+80
+90
1,000
1 F - 1206
Impedance vs. Frequency
100
10
1
0.1
0.1
0.1
100,000
+20
Temperature °C
100
100
0.01
10,000
40
Special
Code
A = Std.
Product
Insulation Resistance vs. Temperature
|Z| (Ohms)
10,000
20
A
10,000
% DC Bias Voltage
|Z| (Ohms)
Capacitance
%
T
+40
-55
|Z| (Ohms)
Capacitance
Tolerance
Z = +80 –20%
A
Capacitance Change
vs. DC Bias Voltage
Temperature Coefficient
+20
+10
0
-10
-20
-30
-40
-50
-60
-70
-80
Z
Insulation Resistance (Ohm-Farads)
0805
100,000
1,000,000
Frequency (Hz)
10,000,000
0.01
10,000
100,000
1,000,000
10,000,000
Frequency (Hz)
29
101316
Y5V Dielectric
Specifications and Test Methods
Parameter/Test
Operating Temperature Range
Capacitance
Y5V Specification Limits
-30ºC to +85ºC
Within specified tolerance
Measuring Conditions
Temperature Cycle Chamber
Dissipation Factor
≤ 5.0% for ≥ 50V DC rating
≤ 7.0% for 25V DC rating
≤ 9.0% for 16V DC rating
≤ 12.5% for ≤ 10V DC rating
Freq.: 1.0 kHz ± 10%
Voltage: 1.0Vrms ± .2V
For Cap > 10 μF, 0.5Vrms @ 120Hz
Insulation Resistance
10,000MΩ or 500MΩ - μF,
whichever is less
Dielectric Strength
No breakdown or visual defects
Charge device with rated voltage for 120 ± 5 secs
@ room temp/humidity
Charge device with 250% of rated voltage for
1-5 seconds, w/charge and discharge current
limited to 50 mA (max)
Resistance to
Flexure
Stresses
Appearance
No defects
Capacitance
Variation
≤ ±30%
Dissipation
Factor
Insulation
Resistance
Solderability
Appearance
Resistance to
Solder Heat
Thermal Shock
Load Life
Load
Humidity
Capacitance
Variation
Dissipation
Factor
Insulation
Resistance
Dielectric
Strength
Appearance
Capacitance
Variation
Dissipation
Factor
Deflection: 2mm
Test Time: 30 seconds
Meets Initial Values (As Above)
≥ Initial Value x 0.1
≥ 95% of each terminal should be covered with
fresh solder
Dip device in eutectic solder at 230 ± 5ºC
for 5.0 ± 0.5 seconds
No defects,
很抱歉,暂时无法提供与“1206YG475ZAT4A”相匹配的价格&库存,您可以联系我们找货
免费人工找货