1808HC102MAT2A

High Voltage MLC Chips For 600V to 5000V Applications High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chip capacitors meet these performance characteristics and are designed for applications such as snubbers in high frequency power converters, resonators in SMPS, and high voltage coupling/dc blocking. These high voltage chip designs exhibit low ESRs at high frequencies. Larger physical sizes than normally encountered chips are used to make high voltage MLC chip products. Special precautions must be taken in applying these chips in surface mount assemblies. The temperature gradient during heating or cooling cycles should not exceed 4ºC per second. The preheat temperature must be within 50ºC of the peak temperature reached by the ceramic bodies through the soldering process. Chip sizes 1210 and larger should be reflow soldered only. Capacitors may require protective surface coating to prevent external arcing. For 1825, 2225 and 3640 sizes, AVX offers leaded version in either thru-hole or SMT configurations (for details see section on high voltage leaded MLC chips). NEW 630V RANGE HOW TO ORDER 1808 AVX Style 0805 1206 1210 1808 1812 1825 2220 2225 3640 *** A Voltage 600V/630V = 1000V = 1500V = 2000V = 2500V = 3000V = 4000V = 5000V = A C A S G W H J K 271 K A 1 Temperature Capacitance Code Capacitance Test Level Termination* Coefficient (2 significant digits Tolerance A = Standard 1 = Pd/Ag C0G = A + no. of zeros) C0G:J = ±5% T = Plated X7R = C Examples: K = ±10% Ni and Sn (RoHS Compliant) 10 pF = 100 M = ±20% 100 pF = 101 X7R:K = ±10% 1,000 pF = 102 M = ±20% 22,000 pF = 223 Z = +80%, 220,000 pF = 224 -20% 1 μF = 105 1 A Packaging Special 1 = 7" Reel** Code 3 = 13" Reel A = Standard 9 = Bulk *Note: Terminations with 5% minimum lead (Pb) is available, see pages 89 and 90 for LD style. Leaded terminations are available, see pages 93 and 94. Notes: Capacitors with X7R dielectrics are not intended for applications across AC supply mains or AC line filtering with polarity reversal. Contact plant for recommendations. Contact factory for availability of Termination and Tolerance options for Specific Part Numbers. ** The 3640 Style is not available on 7" Reels. *** AVX offers nonstandard chip sizes. Contact factory for details. W L T t DIMENSIONS SIZE (L) Length (W) Width millimeters (inches) 0805 1206 1210* 1808* 1812* 1825* 2220* 2225* 3640* 2.01 ± 0.20 3.20 ± 0.20 3.20 ± 0.20 4.57 ± 0.25 4.50 ± 0.30 4.50 ± 0.30 5.70 ± 0.40 5.72 ± 0.25 9.14 ± 0.25 (0.079 ± 0.008) (0.126 ± 0.008) (0.126 ± 0.008) (0.180 ± 0.010) (0.177 ± 0.012) (0.177 ± 0.012) (0.224 ± 0.016) (0.225 ± 0.010) (0.360 ± 0.010) 1.25 ± 0.20 1.60 ± 0.20 2.50 ± 0.20 2.03 ± 0.25 3.20 ± 0.20 6.40 ± 0.30 5.00 ± 0.40 6.35 ± 0.25 10.2 ± 0.25 (0.049 ±0.008) (0.063 ± 0.008) (0.098 ± 0.008) (0.080 ± 0.010) (0.126 ± 0.008) (0.252 ± 0.012) (0.197 ± 0.016) (0.250 ± 0.010) (0.400 ± 0.010) (T) Thickness 1.30 Max. (0.051) (t) terminal min. 0.50 ± 0.25 max. (0.020 ± 0.010) 1.52 (0.060) 0.25 (0.010) 0.75 (0.030) 1.70 (0.067) 0.25 (0.010) 0.75 (0.030) 2.03 (0.080) 0.25 (0.010) 1.02 (0.040) 2.54 (0.100) 0.25 (0.010) 1.02 (0.040) 2.54 (0.100) 0.25 (0.010) 1.02 (0.040) 3.30 (0.130) 0.25 (0.010) 1.02 (0.040) 2.54 (0.100) 0.25 (0.010) 1.02 (0.040) 2.54 (0.100) 0.76 (0.030) 1.52 (0.060) *Reflow Soldering Only 87 High Voltage MLC Chips For 600V to 5000V Applications C0G Dielectric Performance Characteristics Capacitance Range 10 pF to 0.047 μF (25°C, 1.0 ±0.2 Vrms at 1kHz, for ≤ 1000 pF use 1 MHz) ±5%, ±10%, ±20% 0.1% max. (+25°C, 1.0 ±0.2 Vrms, 1kHz, for ≤ 1000 pF use 1 MHz) -55°C to +125°C 0 ±30 ppm/°C (0 VDC) 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 VDC (+125°C) 100K MΩ min. or 1000 MΩ - μF min., whichever is less 10K MΩ min. or 100 MΩ - μF min., whichever is less Minimum 120% rated voltage for 5 seconds at 50 mA max. current Capacitance Tolerances Dissipation Factor Operating Temperature Range Temperature Characteristic Voltage Ratings Insulation Resistance (+25°C, at 500 VDC) Insulation Resistance (+125°C, at 500 VDC) Dielectric Strength HIGH VOLTAGE C0G CAPACITANCE VALUES VOLTAGE 600/630 1000 1500 2000 2500 3000 4000 5000 min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. 0805 10pF 330pF 10pF 180pF — — — — — — — — — — — — 1206 1210 1808 1812 1825 2220 2225 3640 10 pF 1200 pF 10 pF 560 pF 10 pF 270 pF 10 pF 120 pF — — — — — — — — 100 pF 2700 pF 10 pF 1500 pF 10 pF 680 pF 10 pF 270 pF — — — — — — — — 100 pF 3300 pF 100 pF 2200 pF 10 pF 820 pF 10 pF 330 pF 10 pF 180 pF 10 pF 120 pF 10 pF 47 pF — — 100 pF 5600 pF 100 pF 3300 pF 10 pF 1800 pF 10 pF 1000 pF 10 pF 470 pF 10 pF 330 pF 10 pF 150 pF — — 1000 pF 0.012 μF 100 pF 8200 pF 100 pF 4700 pF 100 pF 1800 pF 10 pF 1200 pF 10 pF 820 pF 10 pF 330 pF — — 1000 pF 0.012 μF 1000 pF 0.010 μF 100 pF 4700 pF 100 pF 2200 pF 100 pF 1500 pF 10 pF 1000 pF 10 pF 470 pF 10 pF 220 pF 1000 pF 0.018 μF 1000 pF 0.010 μF 100 pF 5600 pF 100 pF 2700 pF 100 pF 1800 pF 10 pF 1200 pF 10 pF 560 pF 10 pF 270 pF 1000 pF 0.047 μF 1000 pF 0.022 μF 100 pF 0.010 μF 100 pF 6800 pF 100 pF 3900 pF 100 pF 2700 pF 100 pF 1200 pF 10 pF 820 pF X7R Dielectric Performance Characteristics Capacitance Range Capacitance Tolerances Dissipation Factor Operating Temperature Range Temperature Characteristic Voltage Ratings Insulation Resistance (+25°C, at 500 VDC) Insulation Resistance (+125°C, at 500 VDC) Dielectric Strength 10 pF to 0.56 μF (25°C, 1.0 ±0.2 Vrms at 1kHz) ±10%; ±20%; +80%, -20% 2.5% max. (+25°C, 1.0 ±0.2 Vrms, 1kHz) -55°C to +125°C ±15% (0 VDC) 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 VDC (+125°C) 100K MΩ min. or 1000 MΩ - μF min., whichever is less 10K MΩ min. or 100 MΩ - μF min., whichever is less Minimum 120% rated voltage for 5 seconds at 50 mA max. current HIGH VOLTAGE X7R MAXIMUM CAPACITANCE VALUES VOLTAGE 600/630 1000 1500 2000 2500 3000 4000 5000 88 min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. 0805 1206 1210 1808 1812 1825 2220 2225 3640 100pF 6800pF 100pF 1500pF — — — — — — — — — — — — 1000 pF 0.022 μF 100 pF 6800 pF 100 pF 2700 pF 10 pF 1500 pF — — — — — — — — 1000 pF 0.056 μF 1000 pF 0.015 μF 100 pF 5600 pF 100 pF 3300 pF — — — — — — — — 1000 pF 0.068 μF 1000 pF 0.018 μF 100 pF 6800 pF 100 pF 3300 pF 10 pF 2200 pF 10 pF 1800 pF — — — — 1000 pF 0.120 μF 1000 pF 0.039 μF 100 pF 0.015 μF 100 pF 8200 pF 10 pF 5600 pF 10 pF 3900 pF — — — — 0.010 μF 0.270 μF 1000 pF 0.100 μF 1000 pF 0.056 μF 100 pF 0.022 μF 100 pF 0.015 μF 100 pF 0.010 μF — — — — 0.010 μF 0.270 μF 1000 pF 0.120 μF 1000 pF 0.056 μF 1000 pF 0.027 μF 100 pF 0.018 μF 100 pF 0.012 μF — — — — 0.010 μF 0.330 μF 1000 pF 0.150 μF 1000 pF 0.068 μF 1000 pF 0.033 μF 100 pF 0.022 μF 100 pF 0.015 μF — — — — 0.010 μF 0.560 μF 0.010 μF 0.220 μF 1000 pF 0.100 μF 1000 pF 0.027 μF 1000 pF 0.022 μF 1000 pF 0.018 μF 100 pF 6800 pF 100 pF 3300 pF