1812CA221JAT1A

The PDF document contains detailed information about high voltage MLC (Multi-Layer Ceramic) chip capacitors designed for applications such as snubbers in high frequency power converters, resonators in SMPS, and high voltage coupling/dc blocking. Here's a summary based on the provided content:

Material Model: The document specifies AVX high voltage MLC chip capacitors, which are part of the AKYOCERA GROUP COMPANY.

Component Introduction: These capacitors are designed to meet high value, low leakage, and small size parameters for high voltage systems. They exhibit low ESRs at high frequencies and are available in larger physical sizes than normally encountered chips.

Pin Allocation: The document does not provide specific pin allocation details, as these are chip capacitors and do not have pins in the traditional sense.

Parameter Characteristics: - Capacitance Range: 10 pF to 0.100 F - Capacitance Tolerances: ±5%, ±10%, 20% - Dissipation Factor: 0.1% max. at 25°C - Operating Temperature Range: -55°C to +125°C - Temperature Characteristic: 0+30 ppm/°C (0VDC) - Voltage Ratings: 600V to 5000V - Insulation Resistance: 100K MΩ min. at 25°C, 10K MΩ min. at 125°C - Dielectric Strength: Minimum 120% of rated voltage for 5 seconds at 50 mA max. current

Function Details: The capacitors are suitable for high frequency applications due to their low ESR and are designed to handle high voltage requirements in various electronic systems.

Application Information: They are used in high voltage coupling, DC blocking, and as resonators or snubbers in power converters.

Packaging Information: The document mentions various case sizes and soldering recommendations, including reflow soldering only for certain sizes. It also provides information on packaging options such as 7” reel and 13” reel.

Please note that this is a general summary, and for specific details, one should refer to the document, especially for non-specified capacitance values or special requirements.