538702206020096

IDC/Press-Fit WTB: 18-24AWG 53-8702 For more than a decade, insulation displacement contacts (IDC) and press-fit or compliant pin technology have been proven to be two of the most reliable contact systems in critical automotive systems such as: airbag, engine and transmission control units. AVX has combined these two contact technologies into a new and unique, high reliability WTB connection system to replace traditional 2-Piece solutions, offering designers a new packaging option. APPLICATIONS FEATURES AND BENEFITS • Proven “gas tight” cold welded wire termination to PCB • Redundant contact systems provides enhanced wire retention and PCB attachment • Replace costly 2-Piece connector solutions • Automotive electronic systems ELECTRICAL ENVIRONMENTAL MECHANICAL • Current Rating: • Operating Temperature: -40ºC to +125ºC • Contact Material: Tin Plated Copper Alloy • Contact Plating: Pure tin over nickel • Durability: 1 termination cycles AWG Current (Amps) 18 10 20 9 22 7 24 6 • Voltage Rating: 125 VAC HOW TO ORDER 53 8702 X 005 Prefix Series Number of Rows Number of Ways 53 = Finished Part 1XX = 1 2XX = 2 X01 X02 X03 X04 X05 X06 X07 X08 = = = = = = = = 0XX 096 Hole Size Serialized Project Number 018 020 022 024 1 2 3 4 5 6 7* 8* = = = = 18 20 22 24 AWG AWG AWG AWG *7 and 8 way only available in dual row version The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 061721 – IDC/PRESS-FIT – 1 IDC/Press-Fit WTB: 18-24AWG 53-8702 WIRE-TO-PCB CONNECTOR – DUAL ROW IDC TO COMPLIANT TAIL Positions 1 2 3 4 5 6 7 8 Dim. A 5.6 10.1 14.6 19.1 23.6 28.1 32.6 37.1 Dim. B N.A. 4.50 9.00 13.50 18.00 22.50 27.00 31.50 Wire Gauge 18 Awg Stranded 20 Awg Solid/Stranded 22 Awg Solid/Stranded 24 Awg Solid/Stranded Wire Insulation 1.6 - 2.1 1.6 - 2.1 1.1 - 1.6 1.1 - 1.6 NOTES: 1. HOUSING MATERIAL: GLASS-FILLED PBT. 2. CONTACT MATERIAL: TIN PLATED COPPER ALLOY. 3. PART CONTAINS TWO CONTACTS PER POSITION. 4. PLATED-THROUGH PCB HOLES TO MEET THE FOLLOWING: DRILL DIAMETER: 1.150/1.125; COPPER PLATING: 0.025 MIN; FINAL PLATED HOLE DIAMETER: 0.95/1.05. REF IEC 60352-5. 5. FOR INSTALLATION OPTIONS AND FIXTURES, SEE PAGE 4. 6. PARTS TO BE PACKAGED IN 699MM LONG ANTI-STATIC TUBES; NUMBER OF PARTS PER TUBE IS AS SHOWN IN THE TABLE. 7. GENERAL TOLERANCE 0.20 UNLESS OTHERWISE STATED. RECOMMENDED PCB PATTERN PART MOUNTED ON PCB 2 Dim. C 2.1 2.1 1.6 1.6 Approx. Parts/Tube 100 56 40 30 24 20 17 15 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 061721 – IDC/PRESS-FIT – IDC/Press-Fit WTB: 18-24AWG 53-8702 WIRE-TO-PCB CONNECTOR – SINGLE ROW IDC TO COMPLIANT TAIL Positions 1 2 3 4 5 6 Dim. A 5.6 10.1 14.6 19.1 23.6 28.1 Dim. B N.A. 4.50 9.00 13.50 18.00 22.50 Wire Gauge 18 Awg Stranded 20 Awg Solid/Stranded 22 Awg Solid/Stranded 24 Awg Solid/Stranded RECOMMENDED PCB PATTERN Dim. C 2.1 2.1 1.6 1.6 Approx. Parts/Tube 100 56 40 30 24 20 Wire Insulation 1.6 - 2.1 1.6 - 2.1 1.1 - 1.6 1.1 - 1.6 NOTES: 1. HOUSING MATERIAL: GLASS-FILLED PBT. 2. CONTACT MATERIAL: TIN PLATED COPPER ALLOY. 3. PART CONTAINS TWO CONTACTS PER POSITION. 4. PLATED-THROUGH PCB HOLES TO MEET THE FOLLOWING: DRILL DIAMETER: 1.150/1.125; COPPER PLATING: 0.025 MIN; FINAL PLATED HOLE DIAMETER: 0.95/1.05. REF IEC 60352-5. 5. FOR INSTALLATION OPTIONS AND FIXTURES, SEE PAGE 4. 6. PARTS TO BE PACKAGED IN 699MM LONG ANTI-STATIC TUBES; NUMBER OF PARTS PER TUBE IS AS SHOWN IN THE TABLE. 7. GENERAL TOLERANCE 0.20 UNLESS OTHERWISE STATED. PART MOUNTED ON PCB The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 061721 – IDC/PRESS-FIT – 3 IDC/Press-Fit WTB: 18-24AWG 53-8702 TERMINATION/MOUNTING OPTION 1 WIRES FIRST, PCB SECOND TERMINATION/MOUNTING OPTION 2 PCB FIRST, WIRES SECOND 4 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 061721 – IDC/PRESS-FIT –