609176001021000

STANDARD IDC 18-24 AWG: 00-9176 General Information The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. The simplicity of inserting a wire into the connector with a small tool allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these connectors are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the housing has been designed to grab the insulation of the wire to provide a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The 9176 series accepts 18 AWG to 24 AWG wires with an insulation diameter ranging from 1.1mm to 2.1mm. These dual contact connectors support a 10 amp current rating with two large SMT solder tails per wire to provide maximum stability on the PCB. Available in 1p-3p configuration, these connectors can be end stackable for higher pin counts. The 9176 series also comes with optional locking strain relief caps that act as the termination tool for severe vibration applications. FEATURES AND BENEFITS APPLICATIONS • • • • • • • • Connecting discrete wire components directly to the PCB • Bringing power and signals onto a PCB • Daisy chaining PCB’s together to create a continuous string of boards • Application Notes: refer to 201-01-124 IDC contact provides a gas-tight connection to the PCB for long term reliability Connector housing captures the wire insulation for positive strain relief Tested to automotive levels on shock, vibration and temperature cycling for reliability Low and high volume assembly tools to match production volumes Reduced total applied cost versus solder or crimp processes Optional thru and end caps lock in place to provide maximum strain relief High temperature insulator capable to 260ºC reflow soldering processes ELECTRICAL ENVIRONMENTAL MECHANICAL • Current Rating: 10 Amp / Contact • Voltage Rating: 300 VAC • Operating Temperature: -40ºC to +125ºC • • • • Insulator Material: Nylon 46: UL94V0 Contact Material: Phosphor Bronze Plating: Tin over Nickel Durability: 3 Cycles HOW TO ORDER 00 9176 00X 0XX Prefix Series Number of Ways 001 = 1 002 = 2 003 = 3 Wire Gauge Size Code Accepted Wire Gauge Wire Insulation Cap Code Pages 21-22 001 18 Gauge Stranded Ø 1.6-2.1 021 011 20 Gauge Solid or Stranded Ø 1.6-2.1 021 022 22 Gauge Solid or Stranded Ø 1.1-1.6 016 032 24 Gauge Solid or Stranded Ø 1.1-1.6 016 X 06 Insulator Color All Sizes 9 = UL White (Standard) 8 = UL Black (Special Order) Plating Option 6 = Pure Tin all over One Way Only (Special Order) 2 = UL Brown 3 = UL Blue 4 = UL Yellow 5 = UL Red 6 = UL Green 7 = UL Orange Certification: UL File #E90723 14 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 061022 – wire-to-board connectors – STANDARD IDC 18-24 AWG: 00-9176 General Information CONNECTOR/TOOLING PART NUMBER MATRIX SERIES 9176 IDC AWG 18 18 18 18 18 18 20 20 20 20 20 20 22 22 22 22 22 22 24 24 24 24 24 24 24 Wire Insulation Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.6 - 2.1 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 Ø 1.1 - 1.6 HAND INSERTION TOOLING* Positions Color Part Number 1p 1p 2p 2p 3p 3p 1p 1p 2p 2p 3p 3p 1p 1p 2p 2p 3p 3p 1p 1p 1p 2p 2p 3p 3p Black White Black White Black White Black White Black White Black White Black White Black White Black White White Black White Black White Black White 009176001001806 009176001001906 009176002001806 009176002001906 009176003001806 009176003001906 009176001011806 009176001011906 009176002011806 009176002011906 009176003011806 009176003011906 009176001022806 009176001022906 009176002022806 009176002022906 009176003022806 009176003022906 009176001032106 009176001032806 009176001032906 009176002032806 009176002032906 009176003032806 009176003032906 Plastic (medium volume) 069176701601000 069176701601000 069176701601000 069176701601000 069176701601000 069176701601000 069176701601000 069176701601000 069176701601000 069176701601000 069176701601000 069176701601000 069176701602000 069176701602000 069176701602000 069176701602000 069176701602000 069176701602000 069176701602000 069176701602000 069176701602000 069176701602000 069176701602000 069176701602000 069176701602000 Metal (high volume) 069176701701000 069176701701000 069176701701000 069176701701000 069176701701000 069176701701000 069176701701000 069176701701000 069176701701000 069176701701000 069176701701000 069176701701000 069176701702000 069176701702000 069176701702000 069176701702000 069176701702000 069176701702000 069176701702000 069176701702000 069176701702000 069176701702000 069176701702000 069176701702000 069176701702000 Mass Termination N/A N/A 069176701701002 069176701701002 069176701701003 069176701701003 N/A N/A 069176701701002 069176701701002 069176701701003 069176701701003 N/A N/A 069176701702002 069176701702002 069176701702003 069176701702003 N/A N/A N/A 069176701702002 069176701702002 069176701702003 069176701702003 ACCESSORY CAPS Though Wire Wire Stop 609176001021000 609176001021100 609176002021000 609176002021100 609176003021000 609176003021100 609176001021000 609176001021100 609176002021000 609176002021100 609176003021000 609176003021100 609176001016000 609176001016100 609176002016000 609176002016100 609176003016000 609176003016100 609176001016100 609176001016000 609176001016100 609176002016000 609176002016100 609176003016000 609176003016100 609176001021099 609176001021199 609176002021099 609176002021199 609176003021099 609176003021199 609176001021099 609176001021199 609176002021099 609176002021199 609176003021099 609176003021199 609176001016099 609176001016199 609176002016099 609176002016199 609176003016099 609176003016199 609176001016199 609176001016099 609176001016199 609176002016099 609176002016199 609176003016099 609176003016199 * Hand Insertion Tooling - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 15 STANDARD IDC 18-24 AWG: 00-9176 1 Position 18-24 AWG 1 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 16. 3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID AND STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES, SEE TABLE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-106. UL COMPONENTS REFER TO ELECO SPEC 201-01-106U. 6. APPLICATION NOTES 201-01-124. 7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 23. 8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 23. 9. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA). 10. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED. Code Accepted Wire Gauge A Wire Insulation B 001 18AWG Stranded 0.72 Ø 1.6-2.1 2.1 011 20AWG Solid and Stranded 0.60 Ø 1.6-2.1 2.1 022 22AWG Solid and Stranded 0.47 Ø 1.1-1.6 1.6 032 Ø 1.1-1.6 1.6 24AWG Solid and Stranded 0.37 SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER 16 1000 480MM 120MM The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – STANDARD IDC 18-24 AWG: 00-9176 2 Position 18-24 AWG 2 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 16. 3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID AND STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES, SEE TABLE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-106. UL COMPONENTS REFER TO ELECO SPEC 201-01-106U. 6. APPLICATION NOTES 201-01-124. 7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 23. 8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 23. 9. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA). 10. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED. Code Accepted Wire Gauge A Wire Insulation B 001 18AWG Stranded 0.72 Ø 1.6-2.1 2.1 011 20AWG Solid and Stranded 0.60 Ø 1.6-2.1 2.1 022 22AWG Solid and Stranded 0.47 Ø 1.1-1.6 1.6 032 Ø 1.1-1.6 1.6 24AWG Solid and Stranded 0.37 SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER 1000 480MM 120MM The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 17 STANDARD IDC 18-24 AWG: 00-9176 3 Position 18-24 AWG 3 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 16. 3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID AND STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES, SEE TABLE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-106. UL COMPONENTS REFER TO ELECO SPEC 201-01-106U. 6. APPLICATION NOTES 201-01-124. 7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 23. 8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 23. 9. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA). 10. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED. Code Accepted Wire Gauge A Wire Insulation B 001 18AWG Stranded 0.72 Ø 1.6-2.1 2.1 011 20AWG Solid and Stranded 0.60 Ø 1.6-2.1 2.1 022 22AWG Solid and Stranded 0.47 Ø 1.1-1.6 1.6 032 Ø 1.1-1.6 1.6 24AWG Solid and Stranded 0.37 SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER 18 1000 480MM 120MM The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – STANDARD IDC 18-24 AWG: 00-9176 Accessory Cap - Through Wire 60-9176-00X-0XX-X00 ACCESSORY CAP – THROUGH WIRE ASSEMBLED CONNECTOR NOTES: 1. CAP FOR IDC WIRE TO BOARD CONNECTION, 1, 2 AND 3 WAY, THROUGH WIRE. 2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE PAGE 17 FOR THE CORRECT PART CODE TO MATCH WIRE. 3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS SEE TABLE BELOW. 4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW. 5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM. 6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS. 7. PACKED IN BAGS, 1000 PIECES PER BAG. 8. ONE WAY CAP ASSEMBLY AID, REFER TO PAGE 25. 9. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED. Code 016 021 Slot A 1.00 1.50 Diameter B 1.60 2.10 Text Ø1.6 Ø2.1 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – Color Black White X00 000 100 19 STANDARD IDC 18-24 AWG: 00-9176 Accessory Cap - Wire Stop 60-9176-00X-0XX-X99 ACCESSORY CAP – WIRE STOP ASSEMBLED CONNECTOR NOTES: 1. CAP FOR IDC WIRE TO BOARD CONNECTION, 1, 2 AND 3 WAY, WIRE STOP. 2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE PAGE 17 FOR THE CORRECT PART CODE TO MATCH WIRE. 3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS SEE TABLE BELOW. 4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW. 5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM. 6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS. 7. PACKED IN BAGS, 1000 PIECES PER BAG. 8. ONE WAY CAP ASSEMBLY AID, REFER TO PAGE 25. 9. ALL DIMENSIONS ±0.20 TOLERANCE SPECIFIED. Code 016 021 20 Slot A 1.00 1.50 Diameter B 1.60 2.10 Text Ø1.6 Ø2.1 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – Color Black White X00 000 100 STANDARD IDC 18-24 AWG: 00-9176 Hand Insertion Tooling for Single 18/24 Gauge Wire HAND INSERTION TOOLING FOR SINGLE 18/24 GAUGE WIRE UNIVERSAL HANDLE HIGH PRODUCTION Details Tool Part Number 6.35 A/F HEX BIT HOLDER 06 7000 7730 01 000 MEDIUM PRODUCTION Metal Metal/Plastic Max Insulation Dia Tool Part Number Max Insulation Dia Ø2.10 06 9176 7017 01 000 Ø2.10 06 9176 7016 01 000 Ø1.60 06 9176 7017 02 000 Ø1.60 06 9176 7016 02 000 Tool Part Number CLEARANCE AREA ON PCB FOR HAND TOOLING 1 WAY 2 WAY 3 WAY The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 21 STANDARD IDC 18-24 AWG: 00-9176 Insertion Tooling Requires Hand Press with Flat Rock Plates INSERTION TOOLING REQUIRES HAND PRESS WITH FLAT ROCK PLATES 2 WAY 3 WAY HIGH PRODUCTION Metal No. of Ways 2 3 Max Insulation Dia Ø2.10 Ø1.60 Ø2.10 Ø1.60 PCB RESTRICTED AREAS FOR PRESS ASSEMBLY TOOLING 2 WAY 3 WAY NOTES: 1. DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS. 2. MAXIMUM COMPONENT HEIGHT 1.00MM IN THIS AREA. 3. MAXIMUM COMPONENT HEIGHT 6.00MM IN THIS AREA. 4. THE SAME RESTRICTIONS APPLY TO ALL WIRE INSULATION DIAMETERS. 5. 2 AND 3 WAY TOOLS ONLY, FOR USE UNDER HAND PRESS WITH FLAT PLATES. 6. FOR HAND TOOLING REFER TO PAGE 23. 7. ALL DIMENSIONS ±0.20 UNLESS TOLERANCE SPECIFIED. 22 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – Tool Part Number 06 9176 7017 01 002 06 9176 7017 02 002 06 9176 7017 01 003 06 9176 7017 02 003 STANDARD IDC 18-24 AWG: 00-9176 Hand Insertion Tooling for One Way Cap Insertion / Clearance Area on PCB for Hand Tooling HAND INSERTION TOOLING FOR ONE WAY CAP INSERTION CLEARANCE AREA ON PCB FOR HAND TOOLING The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 23 STANDARD IDC 18-24 AWG: 00-9176 Assembled Connector ASSEMBLED CONNECTOR ASSEMBLED CONNECTOR CONNECTOR WITH CAP NOTES: 1. ASSEMBLED HEIGHTS INCLUDE 0.10MM ALLOWANCE FOR PAD AND SOLDER THICKNESS. NO ALLOWANCE HAS BEEN MADE FOR ANY SOLDER RESIST OR OTHER FEATURES. 2. WHEN THE WIRE IS ASSEMBLED THE INSULTATION SHOULD BE TRAPPED BY THESE EDGES. 24 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors –